Edimax PS-1206P Bedienungsanleitung
Edimax
Druckserver
PS-1206P
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Edimax PS-1206P (86 Seiten) in der Kategorie Druckserver. Dieser Bedienungsanleitung war für 39 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/86
User’s Manual
Version: 1.0(July, 2005)
COPYRIGHT
Copyright ©2005/2006 by Edimax Technology. All rights reserved. No part of this
publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or
translated into any language or computer language, in any form or by any means,
electronic, mechanical, magnetic, optic chemical, manual or otherwise, without the prior
written permission of this company.
Federal Communication Commission
Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
4. Consult the dealer or an experienced radio technician for help.
FCC Caution
This equipment must be installed and operated in accordance with provided instructions
and a minimum 20 cm spacing must be provided between computer mounted antenna and
person’s body (excluding extremities of hands, wrist and feet) during wireless modes of
operation.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the authority to operate equipment.
Federal Communication Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure set forth for an uncontrolled
environment. In order to avoid the possibility of exceeding the FCC radio frequency
exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches)
during normal operation.
The antenna(s) used for this transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
R&TTE Compliance Statement
This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE
EUROPEAN PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio equipment
and telecommunication terminal Equipment and the mutual recognition of their conformity
(R&TTE)
The R&TTE Directive repeals and replaces in the directive 98/13/EEC
(Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of
April 8, 2000.
Safety
This equipment is designed with the utmost care for the safety of those who install and use
it. However, special attention must be paid to the dangers of electric shock and static
electricity when working with electrical equipment. All guidelines of this and of the
computer manufacture must therefore be allowed at all times to ensure the safe use of the
equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in Austria, Belgium,
Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, the Netherlands,
Portugal, Spain, Sweden, and the United Kingdom.
The ETSI version of this device is also authorized for use in EFTA member states: Iceland,
Liechtenstein, Norway, and Switzerland.
EU Countries Not intended for use
None.
DISCLAIMER
This company makes no representations or warranties, either expressed or implied, with
respect to the contents hereof and specifically disclaims any warranties, merchantability or
fitness for any particular purpose. Any software described in this manual is sold or
licensed "as is". Should the programs prove defective following their purchase, the buyer
(and not this company, its distributor, or its dealer) assumes the entire cost of all
necessary servicing, repair, and any incidental or consequential damages resulting from
any defect in the software. Further, this company reserves the right to revise this
publication and to make changes from time to time in the contents hereof without
obligation to notify any person of such revision or changes.
Produktspezifikationen
| Marke: | Edimax |
| Kategorie: | Druckserver |
| Modell: | PS-1206P |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Edimax PS-1206P benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Druckserver Edimax
14 September 2024
3 September 2024
8 August 2024
30 Juli 2024
28 Juli 2024
28 Juli 2024
25 Juli 2024
14 Juli 2024
26 August 2023
25 Oktober 2022
Bedienungsanleitung Druckserver
- Druckserver Gembird
- Druckserver HP
- Druckserver Netgear
- Druckserver König
- Druckserver Lindy
- Druckserver TRENDnet
- Druckserver Dymo
- Druckserver TP-Link
- Druckserver D-Link
- Druckserver Lexmark
- Druckserver Star
- Druckserver Digitus
- Druckserver LevelOne
- Druckserver Intellinet
- Druckserver Sitecom
- Druckserver Iogear
- Druckserver StarTech.com
- Druckserver AirLive
- Druckserver SEH
- Druckserver Atlantis Land
- Druckserver Hamlet
- Druckserver Silex
- Druckserver EXSYS
- Druckserver Hawking Technologies
- Druckserver Inter-Tech
- Druckserver Lantronix
Neueste Bedienungsanleitung für -Kategorien-
28 September 2024
24 September 2024
18 September 2024
18 September 2024
6 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
31 August 2024