Edimax ET-913+ V2 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Edimax ET-913+ V2 (3 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/3
ET-913+ V2 Series
10/100/1000Base-T to 1000Base-SX/LX
Media Converter
Best media conversion solutions for network connectivity
Edimax’s full series of Media Converter are designed to meet the needs for massive optical fiber network,
provide the whole Gigabit Ethernet network implementation.
Migrating between copper and ber-based Medium
ET-913+ series convert the signals between two dierent transmission medium, allowing user a simple and
cost-eective method to migrate between UTP cable and ber optic cable. It can transmit signals up to 550m
(multimode) and 10/20/30/60km (single-mode) in ber medium, allowing users to extend network.
Comply with IEEE Standards
ET-913+ series are fully compliant with IEEE 802.3/u/ab 10/100/1000Base-T and 802.3z 1000Base-SX/LX
standards. The device comes with one RJ-45 port to connect to a 10/100/1000Base-T device such as
workstation or switch and one ber connection to connect a 1000Base-SX/LX device.
Feature LED and Fiber link alarm
User could monitor the device through Feature LED. In addition, Fiber Link Alarm could allow user to monitor
and maintain their critical ber link more eectively.
Unique voltage supervisor
Built in voltage supervisor IC will automatically reset all chipsets in converter as power voltage drop below 2.9V,
this action can make sure ber port and TP port work normally when thunder storm or power unstable occurring
cause the power electricity suddenly down in an instant time.
Plug-and-Play Installation
Simply to plug the TP and ber port to the device having the media convertibility.
Features
•Compliant with IEEE 802.3 10BaseT, IEEE802.3u 100BaseTX , IEEE 802.3ab 1000BaseT and IEEE 802.3z
1000BaseSX/LX Standards
•One 10/100/1000BaseT Gigabit Ethernet TP Port and One 1000BaseSX/LX Gigabit Ethernet Fiber Port
•One 1000BaseSX/LX Fiber Port can support either Multi or Single Mode
•TP Port can support Half/Full-Duplex, Auto-MDI/MDI-X and Auto-Negotiation
•Multiple Fiber Connectors
•Supports jumbo frame 9.6KB
•Providing 19” Converter Chassis for up to 16 slots with redundant power supply for optional expansion use
•Supports DIP switch and LFP function
DIP
DIP
DIP
DIPDIP
ON
ON
ON
ONON
OF
OF
OF
OFOFF
F
F
FF
1
Converter & Switch Mode
Switch Mode
2
LFP Enable
LFP Disable
Model Optical Fiber Description
ET-913MSC+ V2
10/100/1000T to 1000SX Multi -Mode 550M SC
ET-913SSC1+ V2
10/100/1000T to 1000LX Single Mode 10KM-SC
ET-913SSC2+ V2
10/100/1000T to 1000LX Single Mode 20KM-SC
ET-913SSC3+ V2
10/100/1000T to 1000LX Single Mode 30KM-SC
ET-913SSC5+ V2
10/100/1000T to 1000LX Single Mode 50KM-SC
ET-913SSC6+ V2
10/100/1000T to 1000LX Single Mode 60KM-SC
ET-913SSC8+ V2
10/100/1000T to 1000LX Single Mode 80KM-SC
ET-913SW2A+ V2
WDM 10/100/1000 to 1000 Single Mode 20KM-A
ET-913SW2B+ V2
WDM 10/100/1000 to 1000 Single Mode 20KM-B
ET-913SW4A+ V2
WDM10/100/ 1000 to 1000 Single Mode 40KM-A
ET-913SW4B+ V2
WDM 10/100/1000 to 1000 Single Mode 40KM-B
ET-913SFP V2
10/100/1000T to 1000 SFP Media Converter
Order Information
Specication
Standards
IEEE802.3 10BaseT
IEEE802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3z 1000BaseSX/LX
IEEE 802.3x Flow Control
Features
Number of Ports:
1 * 10/100/1000BaseT with RJ-45 Connector
1 * 1000BaseSX/LX with Fiber Connector
(Mul/Single Mode)
Jumbo Frames: 9.6 KB
Data Transfer Rate
2000Mbps/Full-Duplex
Transmission Media
TP:
10BaseT Cat. 3, 4, 5 UTP/STP
100BaseTX Cat. 5 UTP/STP
1000BaseT Cat. 5, 5E, 6 UTP/STP, up to
1000BaseSX:
50/125μm Multi Mode Fiber opc cable, up to
62.5/125μm Multi Mode Fiber opc cable, up to
1000BaseLX:
9/125μm Single Mode Fiber opc cable
LED Indicators
Per Port:
(TX): Link, TX
(FX): Link, RX
Per Unit: Power
Power Requirement
DC5V/2A
Power Consumpon
10 Was (Max)
Dimensions
102 x 74 x (L x W x H)
Weight
240g
Operang Temperature
0 to 45℃
Storage Temperature
-20 to 90℃
Humidity
10 to 90% RH (non-condensing)
Cercaons
FCC Class B, CE


Produktspezifikationen

Marke: Edimax
Kategorie: Nicht kategorisiert
Modell: ET-913+ V2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Edimax ET-913+ V2 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Edimax

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂźr -Kategorien-