Edimax EA-IO7D Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Edimax EA-IO7D (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 26 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
EA-IO7D
Edimax EA-IO7D is a high performance 7dBi omni-directional antenna to improve the wireless network signal and
coverage in your home and office. The antenna is connected with a detachable stand which allows you to relocate
the antenna one meter away to a proper / higher position to pick up stronger wireless signals. The stand base is built
in with strong magnet so users can attach it to any metal wall/partition/cabinet or surface.
Wireless signal and distance improvement
EA-IO7D increases the wireless coverage area when it is connected to a wireless AP/router. It also improve the
transmission range when the antenna is connected to a wireless adaptor.
7dBi high gain performance antenna with magnetic relocation stand
The antenna is flexible to rotate 360º. It fits easily to the wall, ceiling or desktop with the magnetic the stand which is
strong enough to hold the antenna onto proper position.
Universal RP-SMA connector for flexible connections
The antenna is not only compatible with Edimax devices, but also with most wireless devices of RP-SMA interface.
Signal transmission in all directions
The antenna is omni-directional so it transmits and receives signals from all directions. It is the best solution for a
radius coverage.
No software or driver needed
All you have to do is to unscrew the original antenna from the device and replace with EA-IO7D onto the devices.
The antenna starts to work when placed to a proper position.
User-friendly mounting kit
Beside magnetic base, a mounting kit is also included for the installation onto wooden or concrete walls.
Indoor 7dBi Omni-directional
Desktop Antenna
FEATURES
zComplies with IEEE802.11b/g standards
zProvides 7dBi high gain antenna with desktop antenna stand
zProvides universal RP-SMA connector to fit with most wireless device
zAttaches to any metal surface with the magnetic relocation stand
zProvides Omni-directional antenna for radius coverage
zProvides user-friendly mounting kit
SPECIFICATIONS
HARDWARE INTERFACE STANDARD & FREQUENCY BAND PEAK GAIN
7dBi RP-SMA detachable antenna
RP-SMA connector at antenna end and antenna
stand end
Cable length (antenna stand) : 1 meter
IEEE802.11b/802.11g
2400-2500MHz
7dBi
POLARIZATION ANTENNA SPEC DIMENSION
HPBW/ horizontal: 360 degree
HPBW/ vertical: 20 degree
VSWR (Voltage Standing Wave Radio) : 2.2 : 1 Max
Impedance: 50 Ohms
Power handling 2 W (c w)
Antenna : OD 13 x 280mm
Antenna stand : 90 x 70 x 30mm
An example of EA-IO7D application:
•Connect to a wireless 802.11b/g device (access point , router or adapter…) with RP-SMA connector
•Adjust the antenna angle to pick up strongest signal
NETWORK SETUP DIAGRAM AND RELATED PRODUCTS
RADIATION PATTERNS:


Produktspezifikationen

Marke: Edimax
Kategorie: Nicht kategorisiert
Modell: EA-IO7D
Breite: 90 mm
Tiefe: 70 mm
Impedanz: 50 Ohm
Höhe: 30 mm
Antenne Zunahmeniveau (max): 7 dBi
Polarisation: Zirkulare Polarisation

Brauchst du Hilfe?

Wenn Sie Hilfe mit Edimax EA-IO7D benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Edimax

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-