ECG 24HSL231M Bedienungsanleitung

ECG Fernseher 24HSL231M

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ECG 24HSL231M (88 Seiten) in der Kategorie Fernseher. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/88

24H SL231M

English

Deutsch

 Always read the safety&use instructions carefully before using your appliance for the rst time. The user´smanual must be always included.

 Bitte lesen Sie vor der Inbetriebnahme des Produktes diese Anleitung und die darin enthaltenen Sicherheitshinweise aufmerksam durch. Die Bedienungsanleitung muss dem Gerät immer beigelegt sein.

SM A R T T V

INST RUC T ION MANUAL

SM A R T T V

BEDIENUNGSAN LEITUNG

English

SMART TV

SAFETY INSTRUCTIONS

Read carefully and save for future use!

Warning: The safety measures and instructions, contained in this manual, do not include all conditions and

situations possible. The user must understand that common sense, caution and care are factors that cannot be

integrated into any product. Therefore, these factors shall be ensured by the user/s using and operating this

appliance. We are not liable for damages caused during shipping, by incorrect use, voltage uctuation or the

modication or adjustment of any part of the appliance. To protect against a risk of re or electric shock, basic

precautions shall be taken while using electrical appliances, including the following:

1. Be very careful when unpacking the device. In particular, protect the screen of the device. It is very easy

to get damaged.

2. Read all of the instructions carefully.

3. Keep the instructions for future reference.

4. Pay attention to warnings found in the manual.

5. Follow all instructions.

6. Do not use the device close to water.

7. Clean only with dry cloth.

8. Do not block exhaust vents. Place the device according to the manufacturer's instructions.

9. Do not place the device near heating sources, such as radiators, heating units, stoves, or other appliances

(including ampliers) producing heat. Do not install the appliance near an open ame (for example,

candles). Under no circumstances should an open ame (e.g. a burning candle) be placed on the product.

Also, do not place hot objects or objects with open ames on or near the unit. High temperatures can melt

plastic parts and cause res.

10. Connect the appliance only to proper and maintained wiring. Make sure that the voltage and frequency

of your outlet match the voltage, frequency, and load rating listed on the equipment label and that the

outlet is properly grounded. The outlet must be installed in accordance with applicable electrical codes

according to EN.

11. Protect the power cable from damage. Do not step on it or bend it.

12. The power cord and plug must be protected. Care must be taken to ensure that no object is placed on the

power cable that may damage the cable insulation.

13. Use only accessories and optional accessories recommended by the manufacturer.

14. Disconnect the appliance from the mains in the event of thunderstorms or other atmospheric phenomena.

that you will not be using the appliance for an extended period of time or before servicing, unplug the

power cord from the power outlet. Disconnect the power cord by pulling the plug – never by pulling the

power cord.

15. Refer to qualied service workers for all necessary repairs and in the event of a fault. Never tamper with the

device and do not perform any technical interventions.

16. The device requires service if it is damaged in any way. If the power cord or its plug is damaged, liquid or a

foreign object has entered the power cord. If it has been exposed to rain or moisture, it has been dropped

or is not functioning normally.

17. The socket to which the TV is connected must be easily accessible at all times. Place the plug of the power

cord of the device directly into a separate socket. Do not use splitters or extension leads. When unplugging,

hold the plug, not the power cord

18. Respect the ecological disposal of batteries.

19. The appliance is designed for operation exclusively indoors and in temperate climates.

20. Do not place any objects lled with liquid on the device, e.g. a vase with owers.

21. Electric discharge can lead to faults. Functionality can be manually restored by switching the appliance

o and on again.

22. This appliance may be used by children over 8 years of age and persons with limited physical and mental

abilities and persons without experience and knowledge of the appliance, provided that supervision and/

or instruction is provided with regard to the use of the appliance in a safe manner so that the hazards

English

associated with its use are understood. Children must not play with this appliance. Children cannot clean

or otherwise maintain the appliance without supervision.

23. DANGER TO CHILDREN: Children may not play with the packaging material. Do not let children play with

the plastic bags. Risk of suocation.

24. This television receiver uses high voltage for operation. Do not remove the back cover of the device. Refer

to qualied service workers for all necessary repairs.

Warning

Do not expose the appliance to rain or moisture. Do not immerse it in any liquid. There is a risk of

electric shock.

Do not expose the appliance to rain or moisture. Risk of re or electric shock.

• Protect the device from drops, shocks, impacts and vibrations. Further from dust and moisture.

• Prevent foreign objects entering the ventilation holes of the device. Protect the TV from spilling any liquids.

• Never insert objects into the air vents of the device. This could cause a short circuit, electric shock or other

damage. Also, do not pour any liquid into the device.

• If the unit is powered by an adapter, use only the supplied adapter.

Attention

Make sure that the power cord does not get caught under the TV.

Do not lean against the TV, tilt or push the device. Pay close attention to the presence of children. A falling

device could cause serious injury.

Do not place the TV on unstable carts, stands, shelves or tables. A fall could damage the device or cause injury.

Place the TV on a at and stable surface.

Do not cover the ventilation holes on the back cover of the device. Sucient ventilation is necessary for the

proper functioning of electrical components.

When installing and operating the appliance, leave a clear space on all sides, which is necessary for proper air

circulation. During operation, heat is generated and dissipated in this way. Under no circumstances operate

the appliance in closed bookcases or shelves. Do not install it in direct sunlight or any place where heat is

generated (radiators, stoves, heat exchangers, etc.).

Leave enough space around the appliance to prevent it from overheating (for example, when placed in a living

room wall or other enclosed space). There is a risk of overheating of the TV, which can cause damage to the

appliance or a re.

• Unplug the device from the outlet before cleaning.

• Clean the product only with a dry cloth.

• Do not use solvents, thinners, abrasive cleaners or wire cloths for cleaning.

Remote control and battery

Warning

Protect the batteries from exposure to high temperatures. Do not expose them to direct re or

sunlight.

• Do not expose the remote control or batteries to direct sunlight.

• The remote control and battery must not be exposed to running or dripping water. Use the remote control

indoors only.

• Insert the batteries into the controller in the correct direction (polarity). Improper insertion of the batteries

may cause damage to the remote control or electrolyte leakage.

• Do not charge, heat, open or short-circuit the batteries.

• Do not throw batteries into the re.

• Do not leave dead batteries in the remote control.

• If you do not use the remote control for a long time, remove the batteries.

• Do not combine dierent types of batteries. Always use only one type. Also, do not combine old and new

batteries.

English

• If electrolyte leaks from the batteries into the remote control, stop using it and contact the relevant service

centre.

• If the remote control does not work properly (performance decreases), replace the batteries with new

ones.

• Small batteries can pose a risk of ingestion by children. Also, do not allow children to play with packaging

material. Risk of suocation.

When using headphones

To prevent possible hearing damage, avoid prolonged listening at high volume.

Excessive sound pressure from earphones can cause hearing damage.

Caution for wall mounting

• Before mounting the TV on the wall, read the instructions supplied with the bracket.

• Wall mounting kit is optional. If it is not included with your TV, you can get it from your local dealer.

• Do not install the TV on the ceiling or on a sloping wall.

• Use the included wall mounting screws and other accessories supplied with the bracket.

• Tighten the screws properly to prevent the TV from falling, but do not overtighten them.

SYMBOLS AND WARNINGS ON THE PRODUCT

ATTENTION

RISK OF ELECTRIC SHOCK, DO NOT OPEN

Attention! To avoid electric shock, do not open the cover. The repair can

only be carried out by a service technician.

The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert

the user to the presence of uninsulated “dangerous voltage” within the product that may be of

suciently high to constitute a risk of electric shock to persons.

An exclamation mark within an equilateral triangle is intended to alert the user to the presence of

important operating and maintenance (servicing) instructions in the literature enclosed with the

appliance.

This symbol means that the device is in the second protection class, with double insulation

between dangerous mains voltage and user-accessible parts. Only use identical spare parts when

performing service work.

Class 1 laser product: This product contains a Class 1 laser source that is safe under reasonably

foreseeable operating conditions.

WARNING

Never place the TV in an unstable place. The TV can fall and cause serious injury or death.

Many injuries, especially to children, can be prevented by simple measures such as:

1. Use the cabinets or stands recommended by the TV manufacturer.

2. Only use furniture that can safely support the TV.

3. Make sure that the TV does not extend over the edge of the furniture on which it is placed.

4. Do not place the TV on tall furniture (such as cabinets or bookcases) without anchoring the furniture and

the TV to a suitable support.

5. Do not place the TV on fabric or other materials that would come between the TV and furniture.

English

REMOTE CONTROLLER

1. : Standby / On (short press), Reset Standby mode(*)

/ O (press and hold)

2. Switches the channel, enters a Number pad:

number or letter in the text eld on the screen.

3. Switches between audio modes (analog Language:

TV), displays and changes audio/subtitle language,

and turns subtitles on and o (digital TV, if available)

4. Turns o the TV sound completelyMute:

5. Volume +/-

6. Displays the electronic program guideGuide:

7. Arrow buttons: Helps you navigate through menus,

content, etc. and when you press the Right or Left

button in TXT mode, subpages are displayed.

8. : Conrms user selections, holds pages (in TXT OK

mode), displays the Channels menu (DTV mode).

9. : Returns to previous screen, previous menu, BACK

opens indexing page (in TXT mode). Quickly cycles

between previous and current programs or sources.

10. Launches the Netix appNetix:

11. Prime Video: Launches the Amazon Prime Video

app

12. Twitch: Launches the Twitch app.

13. Follow the on-screen instructions Color buttons:

for the colour button functions

14. Moves the image backwards in media such Rewind:

as movies

15. Without function

16. Starts playback of the selected mediaPlay:

17. Stops media playbackStop:

18. Pauses media playbackPause:

19. Fast-forward: Moves the image backwards in

media such as movies

20. My Button 1 (**)

21. Launches the Rakuten TV appRakuten TV:

22. YouTube: Launches theYouTube app

23. Leave: Closes and exits the displayed menus and

returns to the previous screen

24. Displays information about the content on the Info:

screen, displays hidden information (reveal - in TXT

mode)

25. Displays the TV menuMenu:

26. Shows all available broadcasts and content Source:

sources

27. Programme +/-

28. Text: Displays teletext (if available), press again to

display teletext over normal broadcast picture (mix)

(*) Standby button

Press and hold the Standby button to view the other actions for that button. Highlight one of the Reset

(Restart), Standby (Normal Standby), and Shutdown (Forced Standby) options and press to perform the OK

selected action. If your TV stops responding to commands and the action menu cannot be displayed, the TV

will restart if you hold the button down for about ve seconds.

English

• HbbTV

High Dynamic Range (HDR) / Hybrid Log-Gamma (HLG)

With this feature, the TV can reproduce a greater dynamic range of luminance by capturing and then combining

several dierent exposures. HDR/HLG promises better image quality with brighter, more realistic highlights,

more realistic colours and other improvements. It delivers the look that the lmmakers were trying to achieve,

allowing hidden areas of dark shadows and sunlight to come through with full clarity, color and detail. HDR/

HLG content is supported via native and portal applications, HDMI, USB inputs and via DVB-S broadcasting.

Included accessories

• Remote controller

• Batteries: 2 x AAA

• Operating manual

• DC 12V Input Power Adapter

• Car plug

Emergency notications

If the TV does not receive any signal (e.g. from an antenna or HDMI source) for 3 minutes, it will switch to

standby mode. When the TV is switched on again, the following message appears: "The TV automatically

switches to standby mode because it hasn't received any signal for a long time." You can disable this feature by

setting the option in > accordingly.No signal timer Settings Devices

The > > Automatic TV o option (in Settings System More) can be set to between 1 and 8 hours by default.

If this setting is not set to O and the TV has been left on and not operated after the set time has elapsed, it

will switch to standby mode after the set time has elapsed. When the TV is switched on again, the following

message appears: "The TV automatically switches to standby mode because no operation has been performed

for a long time." A dialog box appears before the TV switches to standby mode. If you do not press any

buttons, the TV will switch to standby mode after 5 minutes. To immediately put the TV into standby mode,

highlight the button and press . If you highlight and press , the TV will remain active. You can also Yes OK No OK

deactivate the Auto Shutdownfeature in the dialog box. Mark Disable OK and press , the TV will remain active

and the function will be cancelled. You can re-enable the feature by changing the settings for Auto Power O

in > > .Settings System More

CONTROL BUTTONS AND TV OPERATION

Note: The position of the control buttons may vary depending on the model.

1. Direction up

2. Direction down

3. Volume/Info/Source list selection and Standby-On switch

The control switch allows you to control volume/programs/resources and standby

functions on the TV.

To change the volume: Press the button upwards to increase the volume. Press the

button downwards to reduce the volume.

To change channels: Press the middle button and a channel information banner

will appear on the screen. Press the up and down buttons to move between the stored programmes.

To change the source: Press the middle button twice (second time in total) and the channel information will

be displayed. Press the up and down buttons to move between the available sources.

Turning o the TV: Press and hold the middle button for a few seconds to switch the TV to standby mode.

Turning on the TV: Press the centre of the control button and the TV will switch on.

Notes:

• If you turn o the TV, this circuit starts again, starting with the volume setting.

• The OSD main menu cannot be displayed using the control buttons.

English

that you connect all cables to the back of the TV before wall mounting. Insert or remove the CI unit only when

the TV is OFF. You should refer to the module's instruction manual for setup details. Each USB input on the TV

supports devices up to 500mA. Connecting devices above 500mA can damage your TV. When connecting your

device to your TV using an HDMI cable that provides sucient parasitic RF immunity, you will need to use a

shielded HDMI cable with a ferity (quality) HDMI cable.

WARNING: To connect a device to the TV, make sure the TV and the device are switched o before making any

connection. Once the connection is made, you can switch on the units and use them

INSTALLATION AND SETUP

First time installation

The rst time you turn it on, the Selection screen appears. Select the desired language and press . In the OK

following steps of the installation wizard, use the directional buttons and the button to set your preferences.OK

After selecting the language, you will be asked if you want to change the access settings. Highlight and Yes

press to change. For detailed information about the available options, see System menu contents.OK

On the next screen, set your country preferences. Depending on your Country settings, you may be prompted

to set and conrm your PIN at this time. The PIN code selected cannot be 0000. You will need to enter it later

whenever you are prompted for your PIN during menu operations.

Note: The type of M7 operator (digital satellite service provider) will be dened in accordance with the

Language and Country selection you made during Initial Installation.

At this point, you can activate Store Mode. This option congures your TV's storage settings and will be used

depending on the TV model on which the supported features may appear as an information banner at the top

side of the screen. This option is for in-store display purposes only. For home use, it is recommended to select

Home Mode. This option will be available in > Settings System > More, and you can change your preferences

for this setting later. Specify your choice and press to continue.OK

The image mode selection screen appears. If you want your TV to use less energy and be more environmentally

friendly, select Natural and press to continue. You can change your selection later using the Mode option OK

in > .Settings Picture

At this point, depending on your TV model, you may see the Privacy Settings menu. Use this menu to set

your permissions. Highlight a feature and press to turn it on or o. Before making any changes, carefully OK

read the relevant on-screen explanation for each highlighted function. Press the Right directional button to

highlight the text and use the Program +/- or Up/Down directional buttons to scroll up and down to read

the full text. You will be able to change your preferences at any time later in > Settings System Privacy > >

Privacy settings Internet Connection. If is disabled, the Network/Internet Settings screen is skipped and

does not appear.

Highlight the button and press the button on the remote control to continue. The Next OK Network/Internet

Settingsmenu will appear on the screen. To congure the network connection, see Connection. If you want

your TV to consume less power in standby mode, you can turn o the feature by setting it Network Standby

to O. When you have nished setting up, highlight the Next button and press to continue.OK

On the next screen, you can set the types of broadcasts to search, encrypted channel search and time zone

preferences (depending on the country selected). In addition, you can set the type of broadcast as your

favorite. During the search, the selected broadcast type will take precedence and the channels will be listed at

the top of the Channel List. When you're done, highlight the Next button and press to continue.OK

About the choice of the type of broadcast

To start searching for a certain type of broadcast, highlight it and press . The check box for the selected OK

option is selected. To turn o the search option, uncheck the box by pressing the button after moving your OK

attention to the desired broadcast type option.

Digital Antenna: If the search option D is enabled. Antenna Broadcast, the TV will search for digital terrestrial

broadcasts after completing other initial settings.

English

Digital Cable: If the search option D is enabled. Cable, after completing the other initial settings, the TV will

search for digital cable. Before you start the search, a message asks if you want to search the wired network. If

you select Yes and press , you can select Network or set values such as Frequency, Network ID and Search OK

Step on the following screen. If you select No and press , you will be able to set the Start Frequency, Stop OK

Frequency and Search Step on the following screen. When you're done, highlight the Next button and press

OK to continue.

Note: The search time varies according to the selected Search Steps.

Satellite: If the Satellite search option is enabled, the TV will search for satellite digital broadcasts after

completing the other initial settings. Before performing a satellite search, you must make some settings. A

menu will appear where you can choose to start the M7 operator installation or the standard installation.

To start an M7 operator installation, set the Installation Type as Operator and the Satellite Operator as the

appropriate M7 operator. Then highlight the Scan Preferences option and set as Auto Channel Tuning and

press OK to start the automatic search. These options can be pre-selected depending on the Language and

Country options you selected in the previous steps of the Initial Installation process. You may be prompted to

select the HD/SD list or channel list by country, depending on your M7 operator type. Choose one of them and

press to continue.OK

Wait for the scan to nish. Now the list is installed.

During the M7 operator installation procedure, if you want to use satellite installation parameters that dier

from the default settings, select Preferred Scan as Manual Program Search and press to continue. The OK

Antenna Type will then be displayed. After selecting the antenna type and the desired satellite in the following

steps, press the button to change the installation parameter of the satellite in the inserted menu.OK

To search for other channels, such as M7 channels, you must run the standard installation. Select Installation

Type as Standard and press to continue. The Antenna Type will then be displayed.OK

There are three options for antenna selection. You can select the antenna type as Direct, Simple Satellite Cable

System or DiSEqC switch by using the Left or Right buttons. To view the subsequent options, after selecting

your antenna, press . The Continue options will appear,OK

Transponder List and LNB Conguration

Use the related menu options to change the transponder and LNB settings.

• Right: If you have a single receiver and a direct satellite dish, select this type of antenna. Press OKto

continue. On the following screen, select an available satellite and press to search for services.OK

• Simple satellite cable system: Choose this type of antenna if you have multiple receivers and a simple

satellite cable system. Press to continue. Congure the settings as instructed on the following screen. OK

Press to search for services.OK

• DiSEqC switch: If you have multiple satellites and a DiSEqC switch, select this antenna type. Then set

the DiSEqC version and continue by pressing the button. On the next screen you can set up to four OK

satellites (if available) for v1.0 and sixteen satellites for v1.1. Press to scan the rst satellite in the list.OK

Analog: If the Analog search option is enabled, the TV will search for Analog broadcasts after completing the

other initial settings. Once the initial settings are complete, the TV will begin searching for available broadcasts

of the selected broadcast types. During the search, the current results will be displayed at the bottom of the

screen. Once all available stations have been saved, the Channels menu will appear. Here you can edit the

channel list according to your preferences using the Edit tab options, or press the button to exit and Menu

view the TV broadcast.

While the search is in progress, a message will appear asking if you want to sort channels by LCN*. Select Yes

and press to conrm.OK

*LCN (Logical Channel Number) is a feature that allows channels to be automatically arranged according

to their numbers in the order specied by the service provider

Notes:

• To search for M7 channels after the First Installation, you must perform the First Installation again. Or press

the Menu button and enter Settings > Setup > > Automatic programme search Satellite. Then follow

the same steps outlined above in the satellite section.

English

Note: Depending on the model, your TV may not support this feature. This app may not be compatible with

all mobile devices. UHD (4K, Ultra HD) channels are not supported and both devices must be connected

to the same network.

CEC

This feature allows you to control CEC devices that are connected via HDMI port, using the TV remote control.

First, set the CEC option in > Settings Device Enabled Source to . Press the button and select the HDMI input

of the connected CEC device from the Source List menu. When a new CEC source device is connected, it will be

listed in the source menu under its own name, not under the name of the connected HDMI port (such as DVD

player, Recorder 1, etc.).

The remote control will automatically be able to perform basic functions when the connected HDMI source

is selected. To stop operation and control the TV again using the remote control, press and hold the "0 - Zero"

button on the remote control for 3 seconds. You can disable CEC by setting the appropriate option in Settings

> .Devices

The TV supports the ARC (Audio Return Channel) function. This function is an audio link to replace other cables

between the TV and the audio system (A/V receiver or speaker system).

When ARC is active, the TV will automatically mute all audio outputs other than the headphone jack and the

volume buttons will be directed to the connected audio device. To activate ARC, set in Audio Output Settings

> as .Sound HDMI ARC

Note: ARC is supported via HDMI2 input.

Controlling the sound of a connected audio system

Allows for the Audio Amplier/Receiver to be used with the TV. The volume can be controlled using the TV

remote control. To activate this feature, set Audio Output in > as . When HDMI ARC Settings Sound HDMI ARC

is selected, CEC is automatically set to Enabled if it is not already set. The TV speakers will be muted and the

sound of the source you are watching will be broadcast from the connected sound system.

Note: The audio device must support System Audio Control.

E-Manual - E-handbook

You will nd instructions for the functions of your TV in the electronic manual.

To use the electronic manual, go to the menu, select and press . For quick access to the Settings Manual OK

electronic manual, press the button and then the Menu Informationbutton.

Use the directional buttons to select the desired category. Each category contains dierent topics. Select a

topic and press to read the instructions. To close the E-Manual screen, press the or button.OK Exit Menu

Note: Depending on the model, your TV may not support this feature. The content of the E-Handbook may

vary depending on the model.

Contents of the Settings menu

Equipment oer

Virtual remote control Enables or disables the virtual driver function.

Audio and Video Sharing This feature allows you to share les stored on your smartphone

or tablet. If you have a compatible smartphone or tablet and have

the necessary software installed on it, you can share/play photos

on your TV. If you share the software, see the instructions for more

information.

Timer without signal If the TV does not receive any signal (e.g. from an antenna or HDMI

source) for 3 minutes, it will switch to standby mode. You can enable

or disable this feature by setting this option accordingly.

English

CEC With this setting, you can enable or disable the CEC function

completely. Use the Left or Right buttons to activate or deactivate

the selected option.

Automatic CEC switch-on This feature allows you to connect an HDMI-CEC compatible device

to turn on the TV and automatically switch to its input source. Use the

Left or Right buttons to activate or deactivate the selected option.

Picture menu

Mode The image mode can be changed to suit your needs. The picture mode can be set to one of

the following options: Cinema, Game (optional), Sports, Dynamic and Natural.

Contrast Adjusts the lightness and darkness of the image.

Brightness Adjusts the brightness of the screen.

Sharpness Adjusts the sharpness of the object displayed on the screen.

Colour Adjusts the colour.

Save Power To set Energy Saver as Custom, Minimum, Medium, Maximum, Auto,

Screen o or O.

Note: The available options may be inactive depending on the Mode selected.

Rear backlight This setting controls the light level of the screen. The backlight function

will be active if Power Saving is set to an option other than Custom.

Image

format

Sets the desired image size format.

Scrolling images This option varies depending on the Zoom Image setting Highlight and

press , then use the directional buttons to move the image up or OK

down.

PC position Only appears when the input source is set to VGA/PC.

Automatic

position

If the image is not centered in VGA mode, use this option to

automatically adjust the image position. Press the button to start OK

the automatic settings.

Horizontal

positions

This feature places the image horizontally on the right or left side of the

screen.

Vertical positions This function shifts the image vertically up or down.

Point clock

frequency

The Spot Clock setting adjusts the interference that appears as vertical

bars in high-density presentations. For example, tables, paragraphs or

text in a small font.

Phase Depending on the input source (computer, etc.), you may see a blurred

or distorted image on the screen. You can use this feature and clean up

the image by trial and error.

English

Oer System

Settings for the

disabled

Displays the accessibility enhancement options for your TV.

High contrast Increase the contrast of menu options and texts to make them

easier to read. White text, Yellow text and O options will be

available.

Hearing

impairment

Enables any special functions sent by the broadcast.

Audio

Description

A spoken track will be played for blind and visually impaired

viewers. Press the button to display all available options in OK

the Audio Description menu. This feature is only available if the

transmitter supports it.

Dialogue

improvements

This feature provides additional audio processing options to

enhance the dialog box. Low, Medium, High and O options are

available. Set according to your preferences.

Note: This function only occurs when the input audio format is

AC-4 and this eect is applied only to the TV's speaker output.

Spoken

subtitles

Use this setting to select the default preference for spoken

subtitles. If you want spoken subtitles to have a higher priority

than normal subtitles, set this option to On.

This option may not be available depending on the TV model and

is only visible when the source is set to TV.

Zoom in Allows you to use a combination of buttons to enlarge the screen.

The On and O options are available. Set to On to enable.

Zoom support will be turned on or o by long pressing the

number button 5. The rst quadrant of the screen on the top left

will be zoomed in. When zoom support is enabled, long press the

number buttons 2, 4, 6, 8 to move the zoomed area up, left, right

and down.

Minimap The minimap is enabled and disabled by default. Activated when

Zoom is enabled. This option will prevent the zoom function from

displaying the minimap.

Click sound This option sets the click sound for the keys in the TV menu. To

enable it, set it to On.

Highlight programmes using

[S] Subtitles If this option is enabled and if any of the events

in the electronic program guide have the

"Subtitle" access service, these events will be

highlighted in a dierent color.

[SL] Sign

language

If this option is enabled and if any of the events

in the electronic program guide have the "Sign

Language" access service, these events will be

highlighted in a dierent color.

[AD] Sound

description

If this option is enabled and if any event of

the electronic program guide has the "Audio

Description" access service, these events will be

highlighted in a dierent colour.

Language You can set a dierent language depending on the broadcast and country.

Conditional Access Controls conditional access, if available.

Personal data protection

Produktspezifikationen

Marke:	ECG
Kategorie:	Fernseher
Modell:	24HSL231M
Bildschirmdiagonale:	24 "
Eingebaute Lautsprecher:	Ja
Unterstützte Audioformate:	AAC, WAV, WMV, M4A, MP3
WLAN:	Ja
Bluetooth:	Nein
Produktfarbe:	Silber
Tunertyp:	Analog & Digital
RMS-Leistung:	5 W
AC Eingangsspannung:	230 V
AC Eingangsfrequenz:	50 Hz
Kopfhörerausgänge:	1
Anzahl USB 2.0 Anschlüsse:	1
On-Screen-Display (OSD):	Ja
Stromverbrauch (Standardbetrieb):	28 W
Stromverbrauch (max.):	48 W
HD-Typ:	HD
Bildschirmform:	Flach
Natives Seitenverhältnis:	16:9
Kammfilter:	3D
Bildschirmdiagonale (cm):	60 cm
Helligkeit:	- cd/m²
Reaktionszeit:	- ms
Digitales Signalformatsystem:	DVB-C, DVB-S, DVB-T2
Anzahl HDMI-Anschlüsse:	1
Common interface (CI):	Nein
Common interface Plus (CI+):	Nein
Anzahl der Lautsprecher:	2
Energieeffizienzklasse (SDR):	E
Energieverbrauch (SDR) pro 1.000 Stunden:	16 kWh
Energieverbrauch (HDR) pro 1.000 Stunden:	28 kWh
Stromverbrauch (Standby):	0.5 W
Energieeffizienzskala:	A bis G
Energieeffizienzklasse (alt):	B
Analoges Signalformatsystem:	NTSC, PAL, SECAM
Elektronischer Programmführer (EPG):	Ja
Anzahl SCART-Anschlüsse:	1
PC-Eingang (D-Sub):	Ja
PC Audio-Eingang:	Ja
Komponenteneingang Video (YPbPr/YCbCr):	1
Gewicht (ohne Ständer):	3650 g
Breite (ohne Standfuß):	553 mm
Tiefe (ohne Standfuß):	334 mm
Höhe (ohne Standfuß):	63 mm
VESA-Halterung:	Ja
3D:	Nein
Smart-TV:	Nein
Internet-TV:	Nein
DVI Anschluss:	Nein
Anzahl RF Anschlüsse:	1
Unterstützte Videoformate:	MPG, AVI, TS, MKV, VOB, MP4
Unterstützte Bildformate:	JPG
Panel-Montage-Schnittstelle:	75 x 75 mm
Gerätebreite (inkl. Fuß):	553 mm
Gerätetiefe (inkl. Fuß):	365 mm
Gerätehöhe (inkl. Fuß):	135 mm
Geräuschunterdrückung:	Ja
Energieeffizienzklasse (HDR):	G
High Dynamic Range Video (HDR) Unterstützung:	Ja
Technologie mit hohem Dynamikbereich (HDR):	High Dynamic Range 10 (HDR10)
HDMI-Version:	1.4
Kontrolle durch Eltern:	Ja
Display-Auflösung:	1366 x 768 Pixel
Ethernet/LAN:	Ja