Earthworks SR25 Bedienungsanleitung

Earthworks Mikrofon SR25

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Earthworks SR25 (2 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 47 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

User’s Guide

Product Registration

To help you get the most out of your

Earthworks purchase, please take a

moment and register your product with us

online at .earthworksaudio.com/register

Service & Repair

If you have any problems with your

Earthworks products, please contact our

Service & Repair Department.

Email: returns@earthworksaudio.com

Telephone: (603) 654-2433, ext. 119

MADE IN USA

™

Printed in USA

earthworksaudio.com

July 11, 2018

Frequency Response of SR25 (typical)

Description

The Earthworks SR25 is a directional pre-polarized con-

denser microphone with a rst-order cardioid pickup pat-

tern directly coupled to a dedicated wideband, low output

impedance transformerless preamplier. The SR25 re-

quires a standard 24-48V Phantom Power supply. It fea-

tures a at frequency response from 50Hz to 25kHz, fast

impulse response, very low handling noise, uniform polar

pattern, and high SPL handling capabilities. It provides ex-

cellent uncolored rejection of sounds arriving off-axis.

Applications

The Earthworks SR25 is easy to operate. Connect the mi-

crophone to a microphone preamplier supplying 24-48V

phantom power using a standard XLR microphone cable.

Please allow up to one minute for the microphone to settle.

Plugging in the microphone “hot” (phantom power already

present at the input) will not damage the microphone, and

is actually preferred for faster settling. It is normal for any

phantom powered mic to “pop” when plugged in or pow-

ered up. Make sure to mute the signal to speakers or head-

phones when phantom power is rst applied.

The SR25 is designed specically for drums, percussion

and amplied instruments. The SR25 has a brilliance that

is ideal for drum overheads, percussion, Leslie speakers,

guitar and bass. The SR25 is a versatile microphone for

general studio and stage use. Its uniform pickup pattern

results in remarkably open sound, and its excellent off-

axis rejection reduces feedback and maximizes available

gain. A mounting clip is included with the microphone.

This microphone has no removable parts.

Care of Microphone

The Earthworks SR25 microphone is a precision instrument

designed and built to provide years of top performance. Fol-

lowing these simple rules will help to protect your invest-

ment in the SR25:

Avoid touching the front protective screen.

Never attempt to disassemble the microphone –

it cannot be opened.

Avoid extreme heat and condensing humidity. Allow the

microphone to warm up in the case when bringing it in

from the cold weather.

Rough handling may damage the microphone even if no

visible marks are left.

When not in use keep the SR25 in its case.

•

XLR Output Connector Assignment of SR25

Specications

Frequency response: 50Hz to 25kHz ±2dB at 30cm

Polar Pattern: Cardioid

Sensitivity: 10mV/Pa (Typical)

Power Requirements: 24-48V Phantom, 10mA

Peak Acoustic Input: 145dB SPL

Output: XLR-3

Output Impedance: 65Ω, balanced between pins 2 & 3

Minimum Load: 600Ω btw. pins 2 & 3

Noise: 20dB, A equivalent

Dimensions L x D: 165 x 22 mm (6.5 x .860 in.)

Weight: 160g (.35lb)

Impulse Response of SR25 (typical)

Polar Response of SR25 (typical)

Specications are subject to change without notice.

Produktspezifikationen

Marke:	Earthworks
Kategorie:	Mikrofon
Modell:	SR25
Produktfarbe:	Edelstahl
Übertragungstechnik:	Kabelgebunden
Höhe:	165 mm
Typ:	Instrumenten-Mikrofon
Geräteschnittstelle:	XLR-3
Energieverbrauch:	10 mA
Mikrofon-Frequenz:	20 - 25000 Hz
Mikrofon-Empfindlichkeit:	-40 dB
Mikrofon-Eingangsimpedanz:	65 Ohm
Ausrichtung des integrierten Mikrofons:	Kardioide
Anzahl enthaltener Produkte:	1 Stück(e)
Durchmesser:	22 mm
Klemmhalterung enthalten:	Ja
XLR-Out:	1
Mikrofongewicht:	160 g
Phantomspeisung:	24 - 48 V
Äquivalenter Schallpegel:	20 dB
Empfindlichkeit (1kHz):	10 mV/Pa
Maximaler Schalldruckpegel (1kHz):	145 dB