Earthworks QTC50 Bedienungsanleitung

Earthworks Mikrofon QTC50

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Earthworks QTC50 (2 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
Warranty
All Earthworks microphones carry a limited
warranty (parts and labor).
Product Registration
To help you get the most out of your
Earthworks purchase, please take a moment
and register your product with us online at
earthworksaudio.com/register.
Service & Repair
If you have any problems with your
Earthworks products, please contact our
Service & Repair Department.
Email: returns@earthworksaudio.com
Telephone: (603) 654-2433, ext. 119
MADE IN USA
Printed in USA
User’s Guide
™
earthworksaudio.com
July 11, 2018
Pin 1
“Shield”
Pin 2
“+”
Pin 3
“ ”-
Description
The Earthworks QTC50 is an omnidirectional (pressure)
pre-polarized condenser microphone directly coupled to
a dedicated wideband, low output impedance preampli-
er. The QTC50 requires a standard 24-48V phantom
power supply. It features an extended linear free-eld
frequency response from 3Hz to 50kHz, extremely fast
impulse response, low self-noise, very low handling
noise, uniform polar pattern, and high SPL handling ca-
pabilities. It exhibits no proximity effect.
Each microphone is delivered with its own calibration
chart providing the individually measured frequency re-
sponse curve. A mounting clip is included with the mi-
crophone.
Applications
The Earthworks QTC50 is easy to operate. Connect the
microphone to a microphone preamplier supplying 24-
48V phantom power using a standard XLR microphone
cable. Please allow up to one minute for the microphone
to settle. Plugging in the microphone “hot” (phantom
power already present at the input) will not damage the
microphone, and is actually preferred for faster settling.
It is normal for any phantom powered mic to “pop” when
plugged in or powered up. Make sure to mute the signal
to speakers or headphones when phantom power is rst
applied.
The QTC50 is a premium microphone designed for re-
cording quieter sources such as vocals, strings, wood-
winds, and distant-miked orchestras or choirs. For
classical location recording a matched pair will provide
spectacular results. The QTC50 will faithfully repro-
duce sound with impeccable detail and does not ex-
hibit the typical problems and limitation exhibited with
conventional microphones. Its impulse response and
diaphragm settling time is extraordinary, resulting in the
most pure and uncolored sound.
This microphone has no removable parts.
Care of Microphone
The Earthworks QTC50 High Denition Microphone
™ is a
precision instrument designed and built to provide years
of top performance. Following these simple rules will
help to protect your investment in the QTC50:
Avoid touching the front protective screen.
Never attempt to disassemble the microphone –
it cannot be opened.
Avoid extreme heat and condensing humidity.
Allow the microphone to warm up in the case
when bringing it in from the cold weather.
Rough handling may damage the microphone
even if no visible marks are left.
When not in use keep the QTC50 in its case.
•
•
•
•
•
XLR Output Connector Assignment of QTC50
Specications
Frequency response: 3Hz to 50kHz +1/-3dB
Polar Pattern: Omnidirectional
Sensitivity: 34mV/Pa (Typical)
Power Requirements: 24-48V Phantom, 10mA
Peak Acoustic Input: 140dB SPL
Output: XLR-3
Output Impedance: 65Ί, balanced between pins 2 & 3
Minimum Load: 600Ί between pins 2 & 3
Noise: 20dB, A equivalent
Dimensions L x D: 229 x 22 mm (9 x .860 in.)
Weight: 225g (.5lb)
Impulse Response of QTC50 (typical)
Polar Response of QTC50 (typical)
Specications are subject to change without notice.
Frequency Response of QTC50 (typical)

Produktspezifikationen

Marke: Earthworks
Kategorie: Mikrofon
Modell: QTC50

Brauchst du Hilfe?

Wenn Sie Hilfe mit Earthworks QTC50 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Mikrofon Earthworks

Earthworks

Earthworks SR117 Bedienungsanleitung

4 September 2024
Earthworks

Earthworks SR3117 Bedienungsanleitung

31 August 2024
Earthworks

Earthworks PianoMic PM40 Bedienungsanleitung

30 August 2024
Earthworks

Earthworks SR30/HC Bedienungsanleitung

30 August 2024
Earthworks

Earthworks QTC50 Bedienungsanleitung

30 August 2024
Earthworks

Earthworks C30 Bedienungsanleitung

30 August 2024
Earthworks

Earthworks SR20 Bedienungsanleitung

30 August 2024
Earthworks

Earthworks PM40 Bedienungsanleitung

30 August 2024
Earthworks

Earthworks M30 Bedienungsanleitung

30 August 2024
Earthworks

Earthworks QTC30 Bedienungsanleitung

30 August 2024

Bedienungsanleitung Mikrofon

Neueste Bedienungsanleitung fĂźr -Kategorien-

Power Dynamics

Power Dynamics PD524 Bedienungsanleitung

15 Oktober 2024
AKG

AKG WMS420 Bedienungsanleitung

13 Oktober 2024
Sennheiser

Sennheiser ew 100 G4-845-S Bedienungsanleitung

13 Oktober 2024
Audio-Technica

Audio-Technica BP892xCH Bedienungsanleitung

12 Oktober 2024
Sennheiser

Sennheiser SKM 300-835 G3-G Bedienungsanleitung

9 Oktober 2024
Sennheiser

Sennheiser SKM 500 G4 Bedienungsanleitung

9 Oktober 2024
Audio-Technica

Audio-Technica ATM610a Bedienungsanleitung

8 Oktober 2024
Omnitronic

Omnitronic AAB-10 Bedienungsanleitung

8 Oktober 2024
AKG

AKG CBL201B Bedienungsanleitung

8 Oktober 2024
Audio-Technica

Audio-Technica BP894x Bedienungsanleitung

7 Oktober 2024