Dymo 4010 Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Dymo 4010 (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 25 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
by
MODEL 4010
150 lb Digital Shipping Scale
MODEL 4040
400 lb Digital Shipping Scale
USER GUIDE
© 2009 Sanford, L.P. All rights reserved. Revised 6/09.
No part of this document or the software may be reproduced or transmitted in any form or by any
means or translated into another language without the prior written consent of Sanford, L.P.
1
DYMO by Pelouze Digital Shipping Scale
Your new Digital Shipping Scale has a
detachable display for wall mounting and a
no-skid platform surface. This User Guide
provides instructions for using the scale.
Setting Up the Scale
The scale is powered through the included
power adapter. Optionally, the scale can be
powered by a 9-volt battery.
To set up the scale
1. Unpack the scale.
2. Set the scale on a firm, flat surface.
3. Remove the protective covering from the LCD display.
4. Plug the coiled cord into the bottom left of the scale display.
5. Plug the power adapter into the bottom right of the scale display.
6. Plug the other end of the power adapter into a power outlet.
Inserting the Battery
When not powered through the power adapter, the scale can
be powered by one 9-volt alkaline battery.
To insert the battery
1. Disconnect the power adapter from the scale display and
the power outlet.
2. Remove the battery compartment cover from the back of
the scale display.
3. Attach a 9-volt battery to the battery terminals as shown.
Make sure to attach the battery correctly. Attaching the battery backwards can
damage the scale and cause smoke or burning.
4. Insert the battery into the compartment and replace the cover.
Remove the battery if the scale will not be used for a long period of time.
Turning On the Power
The scale has an Auto Shut Off feature which automatically turns off the scale after two
minutes of inactivity. You can turn off this Auto Shut Off feature.
To turn the scale on
♦
Press the
ON
button on the front of the scale.
When the scale is first turned on, wait a few seconds for the scale to stabilize before weighing
items. The display shows
0.0
when ready.
Lb/Kg Zero/Hold On Off
LCD
Display
!
!

Produktspezifikationen

Marke: Dymo
Kategorie: Nicht kategorisiert
Modell: 4010

Brauchst du Hilfe?

Wenn Sie Hilfe mit Dymo 4010 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Dymo

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-