Doro Primo 805 Bedienungsanleitung

Doro Smartphone Primo 805

Lesen Sie kostenlos die šŸ“– deutsche Bedienungsanleitung fĆ¼r Doro Primo 805 (1 Seiten) in der Kategorie Smartphone. Dieser Bedienungsanleitung war fĆ¼r 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
www.doro.com
1. GET STARTED
SIMī€ƒcard,ī€ƒmemoryī€ƒcardī€ƒandī€ƒbaī†©ery
Removeī€ƒtheī€ƒbaī†©eryī€ƒcover
Be careful not to damage your
ī„®ngernails when you remove
the baī†©ery cover. Do not bend
or twist the baī†©ery cover
excessively as it may be
damaged.
Insert the SIM card (required)
GB
Remove the baī†©ery if it is
already installed. Insert the
SIM card by gently sliding it
into the holder. Make sure the
contacts are facing
downwards and the cut-oī„«
corner is placed as shown on
the drawing. Take care not to
scratch or bend the contacts
on the SIM card. This device accepts mini SIM or 2FF SIM
card.
If you have problem to remove/replace the SIM card, use
adhesive tape on the exposed part of the SIM card to pull
it out.
Insertī€ƒtheī€ƒSDī€ƒcardī€ƒ(opī†Ÿonal)
The device works with or without a SD card.
Locate the SD card holder. Press the cardā€™s lid carefully
to the right unī†Ÿl it ā€œclicksā€. Liī…Œ the lid to an upright
posiī†Ÿon. Place the card in the compartment as shown
on the drawing. Make sure the cardā€™s contacts are facing
downwards. Close the lid. Carefully press down and slide
the lid to the leī…Œ unī†Ÿl it ā€œclicksā€ into place. Compaī†Ÿble card
type: microSD, microSDHC.
Insertī€ƒtheī€ƒbaī†©eryī€ƒandī€ƒreplaceī€ƒtheī€ƒ
baī†©eryī€ƒcover
Insert the baī†©ery by sliding it into
the baī†©ery compartment with
the contacts facing downwards to
the right. Replace the baī†©ery
cover.
3. CALLS
Makeī€ƒaī€ƒcall
1. Enter the phone number including the area code.
Delete with
Clear
.
2. Press to dial. Press
Abort
to cancel the call.
3. Press to end the call.
Note! For internaī†Ÿonal calls, always use
+
before the
country code for best operaī†Ÿon. Press * twice for the
internaī†Ÿonal preī„®x
+
.
Callī€ƒfromī€ƒtheī€ƒphonebook
1. Press
Name
to open the phonebook.
2. Use
UP/DOWN
to scroll through the phonebook, or
quick search by pressing the key corresponding to the
ī„®rst leī†©er of the name.
3. Press
Opī†Ÿonsī€ƒ
Ć¢
Call,
alternaī†Ÿvely, press to dial
the selected entry, or press
Back
to return to standby.
Receiveī€ƒaī€ƒcall
1. Press to answer, or
Reject
to reject the call.
Alternately, press to reject the call directly.
2. Press to end the call.
Callī€ƒopī†Ÿons
During a call the selecī†Ÿon buī†©ons ( ) give access to
addiī†Ÿonal funcī†Ÿons.
Owner numbers
The phone number assigned to your SIM card is saved as
Owner number if this is allowed by the card. You can also
select to add addiī†Ÿonal numbers.
Fixedī€ƒdialī€ƒ(FDN)
You can limit calls to certain numbers saved on the SIM
card. The list of allowed numbers is protected by your
PIN2-code.
Note! A password is needed to apply ī„®xed dial. Contact
your service provider to get the password.
7. CALL LOG
Received, missed, and dialled calls are saved in a combined
call log. 20 calls of each type can be stored in the log. For
mulī†Ÿple calls related to the same number, only the most
recent call is saved.
1. Press to ī„®nd your call log.
2. Use
UP/DOWN
to scroll through the call log.
=
Receivedī€ƒcall
=
Dialledī€ƒcall
=
Missedī€ƒcall
3. Press to dial, or
Opī†Ÿonsī€ƒ
for the available opī†Ÿons.
Primo 805
Manual
1. Earpiece
2. Volume control
3. Leī…Œ selecī†Ÿon buī†©on
4. Call buī†©on
5. Memory keys A - C
6. Microphone
7. Voice mail
8. Internaī†Ÿonal preī„®x/
Symbols
9. Charging socket
(micro-USB)
10. Headset socket
11. Input method/Silent
12. End call and
Power on/Power oī„«
13. Navigaī†Ÿon key
14. Right selecī†Ÿon buī†©on
15. Indicator light
16. Camera lens
17. Loudspeaker
Charge the phone
CAUTION
Only use baī†©eries, charger and accessories that have
been approved for use with this parī†Ÿcular model.
Connecī†Ÿng other accessories may be dangerous and may
invalidate the phoneā€™s type approval and guarantee.
When the baī†©ery is running low, is displayed and a
warning signal is heard.
Connect the mains adapter to a wall socket and to the
charging socket on the phone.
Alternaī†Ÿvely connect the cable to the charging socket on
the phone and to a USB port on a computer.
2. GET TO KNOW YOUR PHONE
Turnī€ƒtheī€ƒphoneī€ƒonī€ƒandī€ƒoī„«
1. Press and hold the
Endī€ƒcall
buī†©on on the phone to
turn it on/oī„«.
2. If the SIM card is valid but protected with a PIN code
(Personal Idenī†Ÿī„®caī†Ÿon Number),
Input PIN
is displayed.
Enter the PIN code and press
OK
. Delete with
Clear
.
Note! If PIN and PUK codes were not provided with your
SIM card, please contact your service provider.
Tip: It is recommended to remove the protecī†Ÿve plasī†Ÿc
ī„®lm from the display to enhance the visibility.
Remain: #
shows the number of PIN aī†©empts leī…Œ. When no
more aī†©empts remain,
PINī€ƒblocked
is displayed. The SIM
card must now be unlocked with the PUK code (Personal
Unblocking Key).
1. Enter the PUK code and conī„®rm with
OK
.
2. Enter a new PIN code and conī„®rm with
OK
.
3. Re-enter the new PIN code and conī„®rm with
OK
.
Navigaī†Ÿonī€ƒkey
E
A
D
CB
ā€¢ Press to conī„®rm.(A)
Alternaī†Ÿvely press selecī†Ÿon
buī†©on
OK
.
ā€¢ Press from standby to (A)
open the phone menu.
Alternaī†Ÿvely press leī…Œ
selecī†Ÿon buī†©on
Menu
to
access the phone menu.
Press the buī†©ons: , B (UP) C
(RIGHT) D (LEFT), ,
E (DOWN), to scroll and to select.
Shorcuts
The navigaī†Ÿon key also have the following shortcuts from
standby:
B Camera
C Messaging
D User proī„®les
E Alarm
Enter text
ā€¢ Press a numerical key repeatedly unī†Ÿl the desired
character is shown. Wait a few seconds before entering
the next character.
ā€¢ Press * for a list of special characters. Select the
desired character with UP/DOWN/RIGHT/LEFT and press
OK
to select.
ā€¢ Use navigaī†Ÿon keys to move the cursor within the text.
ā€¢ Press # to cycle upper case, lower case and numerals.
Volumeī€ƒcontrol
Use the side buī†©ons to adjust the sound volume during a
call. The volume level is indicated on the display.
Silent
Silent is a ī„®xed proī„®le with keypad tone, message tone and
ring tone disabled.
ā€¢ Press and hold # to acī†Ÿvate and to deacī†Ÿvate silent.
Phone indicators
LED light on the phone will:
ā€¢ ī…‡ash green when you have a new message or a missed
call. Aī…Œer reading the new message/missed call, the
ī…‡ashing will stop.
ā€¢ steady green when fully charged
ā€¢ ī…‡ash red when the baī†©ery is running low
ā€¢ steady red when charging.
4. SOS CALLS
As long as the phone is switched on, it is always possible
to place an SOS call by entering the main local emergency
number for your present locaī†Ÿon followed by .
5. MESSAGES
Create and send text messages/
picture messages
1. Press
Menu
Ć¢
Messages
Ć¢
Write message
Ć¢
Text
message/Mulī†Ÿmediaī€ƒmessage.
2. Write your message, then press
Opī†Ÿons
.
3. If you want to send a picture message, select:
Add picture/Add sound/Add video/Add subject.
4. When ready, press
Opī†Ÿonsī€ƒ
Ć¢
Send to
and select
recipient from the phonebook
ī€ƒ(Addī€ƒfromī€ƒPhobook)
.
Alternaī†Ÿvely, select
Enter recipient
to add recipient
manually and press
Done
.
5. You can modify the recipients by selecī†Ÿng one and
press
Opī†Ÿons
.
6. When done, press
Opī†Ÿonsī€ƒ
Ć¢
Send
.
Textī€ƒmessages/pictureī€ƒmessagesī€ƒseī†«ngs
ā€¢ Press
Menu
Ć¢
Messages
Ć¢
ī€ƒMessageī€ƒseī†«ngsī€ƒ
Ć¢
Text
message/Mulī†Ÿmediaī€ƒmessage
.
Inbox/Draī…Œs/Outbox/Sentī€ƒmessages
1. Press
Menu
Ć¢
Messages.
2. Select
Inbox/Draī…Œs/Outbox
/
Sent messages
.
3. Select the wanted message.
4. Press
Opī†Ÿons
to view the available opī†Ÿons.
6. PHONEBOOK
The Phonebook in the phone can store 1000 entries.
Add contact
1. Press
Menu
Ć¢
Phonebook
Ć¢
Add new contact
Ć¢
select
To SIM
or
To phone
.
2. Enter
Name
and
Number
for the contact.
3. Enter wanted ī„®elds.
4. When done, press
Opī†Ÿonsī€ƒ
Ć¢
Save
.
To modify an entry press
Opī†Ÿons
for the available opī†Ÿons.
Memory keys A - C
Add numbers to Memory keys
1. Press
Menu
Ć¢
Phonebook
Ć¢
Opī†Ÿonsī€ƒ
Ć¢
Phonebook
seī†«ngsī€ƒ
Ć¢
ABC-keys
.
2. Select
Key A
and enter the phone number including the
area code. Delete with
Clear
.
3. Repeat to add speed dial entries for buī†©ons B and C.
4. Press
OK
to save.
Use A ā€“ C to speed dial an entry from standby.
ā€¢ Press the corresponding buī†©on to dial.
Speedī€ƒdialī€ƒ2 - 9
Enable/disableī€ƒspeedī€ƒdial
1. Press
Menu
Ć¢
Phonebook
Ć¢
Opī†Ÿonsī€ƒ
Ć¢
Phonebook
seī†«ngsī€ƒ
Ć¢
Speedī€ƒdial
.
2. Select
Status
Ć¢
On/Oī„«
Addī€ƒspeedī€ƒdialī€ƒnumbers
1. Press
Menu
Ć¢
Phonebook
Ć¢
Opī†Ÿonsī€ƒ
Ć¢
Phonebook
seī†«ngsī€ƒ
Ć¢
Speedī€ƒdialī€ƒ
Ć¢
Set numbers
.
2. Select the wanted posiī†Ÿon (2-9) Ć¢
Edit
Ć¢and select an
entry from the phonebook.
3. Press
OK
to conī„®rm.
4. Repeat to add speed dial for more entries.
To edit or remove an entry press
Opī†Ÿonsī€ƒ
Ć¢
Edit/Remove
Use 2 ā€“ 9 to speed dial an entry from standby.
ā€¢ Press the corresponding buī†©on to dial.
Voicemailī€ƒserver
If your subscripī†Ÿon includes an answering service, callers
can leave a voice mail message when you are unable to
answer a call. Voice mail is a network service and you may
need to subscribe to it ī„®rst. For more informaī†Ÿon and for
the voice mail number, contact your service provider.
Callī€ƒvoiceī€ƒmail
ā€¢ Press and hold shortcut buī†©on 1.
8. MULTIMEDIA
Press
Menu
Ć¢
Mulī†Ÿmedia
to reach the following features:
Camera
You can take photos, record videos and view your photos
and videos.
1. Press
Menu
Ć¢
Mulī†Ÿmediaī€ƒ
Ć¢
Camera.
2. Press middle navigaī†Ÿon key to take the photo.
3. Press
UP/DOWN
to switch between camera and
videocamera.
4. Press
Opī†Ÿons
or press
Back
to take a new photo
(if you do not make any selecī†Ÿon the picture is saved).
Cameraī€ƒseī†«ngs
Press and scroll through the diī„«erent opī†Ÿons.
Press to go back.
Image viewer
Here you can view your saved pictures. Press
Opī†Ÿons
to
view the available opī†Ÿons.
Videoī€ƒgallery
Here you can view your saved videos.
Sound recorder
Here you can record sounds using the in-built microphone.
Recorded sounds can also be used as ring tones.
1. Press
Menu
Ć¢
Mulī†Ÿmediaī€ƒ
Ć¢
Sound recorder.
2. Press
Opī†Ÿons
Ć¢
New record
to start the recording.
3. Press
Pause/Conī†Ÿnue
or
Stop
to control the recording
.
4. Press
Opī†Ÿons
for the available opī†Ÿons.
FM radio
The FM radio has a frequency range from 87.5 to 108.0
MHz. To listen to the radio, you need to connect a
compaī†Ÿble headset which acts as an antenna.
ā€¢ Press LEFT/RIGHT to change frequency
ā€¢ Press UP/DOWN to control volume
ā€¢ Press
Opī†Ÿons
for the available opī†Ÿons:
ā€¢
Channelī€ƒlist
to save up to 30 radio channels.
ā€¢
Manualī€ƒinput
to enter the frequency with the keypad.
ā€¢
Auto search
to search and save the strongest channels
in your current locaī†Ÿon.
Pleaseī€ƒnote! Previously stored channels will be
replaced by
Auto search
.
ā€¢
Seī†«ngs
for more seī†«ngs.
9. SETTINGS
Phoneī€ƒseī†«ngs
ā€¢
Time and date
To set the ī†Ÿme and date of the phone.
You can also set your home city and let your phone auto
update the ī†Ÿme when you travel.
ā€¢
Language
Set the language of the phone.
ā€¢
Wallpaper
Set background wallpaper of the display.
ā€¢
LCDī€ƒbacklight
Set brightness and ī†Ÿmeout for the display.
Callī€ƒseī†«ngs
ā€¢
Callī€ƒwaiī†Ÿng
: You can handle more than one call at a ī†Ÿme,
put the current call on hold and answer the incoming
call. When acī†Ÿvated, an alert tone is heard if there is an
incoming call while talking.
ā€¢
Callī€ƒdivert
You can divert calls to an answering service
or to another phone number. Set up which calls should
be diverted. Select a condiī†Ÿon and press
OK
, then select
Acī†Ÿvate
,
Deacī†Ÿvate
or
Query status
for each.
ā€¢
Callī€ƒbarring
Your phone can be restricted to disallow
certain types of calls.
Note! A password is needed to apply call barring. Contact
your service provider to get the password.
Network setup
Selectī€ƒnetwork
ā€¢
New search
to perform new search if connecī†Ÿon is lost.
ā€¢
Selectī€ƒnetwork
to view available network, a list of
available network operators is displayed (aī…Œer a short
delay). Select desired operator.
ā€¢
Network mode
to select another network. Select
Automaī†Ÿc
to select network automaī†Ÿcally or
Manual
to
select network manually.
Preferences
To set the priority of the service proders
Serviceī€ƒselecī†Ÿon
ā€¢
GSM
service only.
ā€¢
WCDMA
3G service only.
ā€¢
Automaī†Ÿc
switch between GSM and 3G for best service.
Networkī€ƒinformaī†Ÿon
View your current network seī†«ngs.
GPRSī€ƒconnecī†Ÿon
Set when GPRS data should be available,
When needed
or
Always
.
GPRSī€ƒtransferī€ƒpref.
Set if data or voice call should have
GPRS preference.
HSPAī€ƒpreference
Set if HSPA should be on or oī„«.
Userī€ƒproī„®les
The phone has 4 available user proī„®les. Each proī„®le
can have diī„«erent seī†«ngs for ring signals, ring volume,
vibraī†Ÿon, message noī†Ÿī„®caī†Ÿon etc. The user proī„®les can
also be customized for diī„«erent environment.
1. Select the wanted user proī„®le.
2. Press
Opī†Ÿons
to:
ā€¢
Acī†Ÿvate
to acī†Ÿvate the proī„®le
ā€¢
Customize
to set it as you wish
ā€¢
Reset
to return the proī„®le to default seī†«ngs
Flightī€ƒmode
To set ī…‡ight mode on or oī„«.
Bluetooth
You can connect wirelessly to other Bluetooth compaī†Ÿble
devices such as headsets or other phones.
Important!
When you are not using Bluetooth connecī†Ÿvity, turn oī„«
Power
or
Visibility
. Do not pair with an unknown device.
English
Note!
All illustraī†Ÿons are for illustraī†Ÿve purposes only
and may not accurately depict the actual device. The
items supplied with your phone might vary depending on
the soī…Œware and accessories available in your region or
oī„«ered by your service provider. You can obtain addiī†Ÿonal
accessories from your local Doro dealer. The supplied
accessories provide the best performance with your phone.
2
3
4
6
14
12
16
13
11
7
10
9
1
8
17
5
15


Produktspezifikationen

Marke: Doro
Kategorie: Smartphone
Modell: Primo 805

Brauchst du Hilfe?

Wenn Sie Hilfe mit Doro Primo 805 benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Smartphone Doro

Bedienungsanleitung Smartphone

Neueste Bedienungsanleitung fĆ¼r -Kategorien-