Dormakaba PIL-S01 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Dormakaba PIL-S01 (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
PIL-S01
Cylindrical personal interlock
Subject to change without notice
Standard units PIL-S01
Construction
Outside diameter 40-3/16" (1020 mm) 44-1/16" (1120 mm)
48" (1220 mm) 52" (1320 mm)
55-5/16" (1420 mm) 59-13/16" (1520 mm) 63-3/4" (1620 mm)
Passage width 20-1/2" (520 mm) 22-13/16" (580 mm)
25-9/16" (650 mm) 27-15/16" (710 mm)
30-11/16" (780 mm) 33-1/16" (840 mm) 35-13/16" (910 mm)
Total height 90-9/16" (2300 mm)
Passage height 82-11/16" (2100 mm)
Upper part of body 7-7/8" (200 mm)
Body
Side panels With glass panel, option for metal-clad.
Interior Black rubber floor mat.
Sliding doors Metal profiles with curved glass.
Finish Anodized aluminum, powder coated, and stainless steel.
Function Door leaves with locking system.
Default position inside and outside closed.
Automatic opening and closing of both door leaves consecutively.
Emergency release button inside the interlock opens the outer
door. Manual override is optional.
Threshold protection sensor, designed to prevent an open door
from closing when a person is in the detection zone.
In the event of a power failure, the inside door will operate fail
secure and the public door will operate fail safe.
PIL Vision/anti-piggybacking.
Interior biometrics.
Electrical equipment Network-compatible ETS 22 CAN bus control unit integrated in
the unit.
Power supply 230 VAC, 50 Hz.
Installation On stainless steel floor element with guide rail for sub floor level SFL,
measure X = 2-3/4"–3-1/8" (70–79 mm).
The ambient conditions must be checked for outdoor installation.
2
dormakaba
Note
Dimensions are shown as
inches followed by millimeters;
for example, 1" (25).
PIL-S01 cylindrical personal interlock
PIL-S01
Elevation drawings
DH = 82-11/16"
(210 0)
GH = DH+DR
40-5/16"
(1050)
DR
RFB
FFB 40 "‒63 "-3/16 -3/4
(1020‒1620)
20 /2"‒35-13/16-1 "
(520‒910)
Installation examples
8"7-7/
(200)
DH = 82-11/16" (2100)
GH = 90- 16" (2300)9/
RFB FFB
Ø52"
(Ø1320)
DB ca.
27-15/16 10" (7 )
Interior
Exterior
RFB
FFB
DH = 82-11/16" (2100)
90-9/16" (2300)
Interior
Exterior
13 "-3/4
(350)
8"7-7/
(200)
ca. 23-13/16"
(580)
3
PIL-S01
with Vision
Elevation drawings
n63-3/4" (n1620) 7/8"7-
(200)
2-3/4"
(70)
FFB / FFL
90- 16" (2300)9/
98-7/16" (2500)
62-3/4" (1593)
Top view without body ) top and floor element (1 : 10
Entr door closey
d E
ntry door open
inside
outside
58-3/16" (1478)
DB / PW = 35-13/16" (910)
60-1/4"
(1530)
PIL-S01
optional
components
Electric key-operated
push button in console
Frame for
flush-mounting
Release button Signal device Key switch OPL 05
Console 1
Plastic in color of
unit or in RAL 9006
Width 3-11/16” (94 mm)
Height 3-11/16” (94 mm)
Depth 2-9/16” (65 mm)
Console 2
Aluminum in color of
unit or in RAL 9006
Width 5-1/2” (140 mm)
Height 7-1/8” (180 mm)
Depth 4-3/8” (110 mm)
Console 3
Aluminum in color of
unit or in RAL 9006
Width 5-1/2” (140 mm)
Height 14-3/8” (365 mm)
Depth 4-3/8” (110 mm)
dormakaba PIL-S01 cylindrical personal interlock


Produktspezifikationen

Marke: Dormakaba
Kategorie: Nicht kategorisiert
Modell: PIL-S01

Brauchst du Hilfe?

Wenn Sie Hilfe mit Dormakaba PIL-S01 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Dormakaba

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-