Dormakaba OS-12C T Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Dormakaba OS-12C T (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Subject to change without notice
• Easy to install amplifier unit and
sensor heads. The amplifier unit
features screwless wiring terminals
for fast installation. Pressing the
"Teach-in" button automatically
sets the proper sensitivity and
self-corrects crossed cables.
A single amplifier operates one or
two pairs of sensor heads.
• Monitoring capability. With its
built-in monitoring capability, this
system monitors all its critical
functions and notifies compatible
controls when an error occurs.
Self-monitoring ensures a higher
level of performance over the life
of the sensor.
Active infrared safety beams
Automatic sliding doors
Entrance systems
Description
Active infrared safety beams are compatible with a wide variety of
automatic door systems. The amplifier and sensor heads are designed for
fast, simple installation while maintaining the highest standards of safety
and reliability. This unit complies with new ANSI standard.
Features & benefits
Teach-in button One push installation sensor head
DX3335018
SENSOR HEAD UNIT
32' 10" (10 m)
PPS
MOUNTING PLATE
SILVER 2 PIECES
OSBH
SENSOR HEAD
HOLDER 2 PIECES
POC
ONE PUSH OUTER
PLATE 2 PIECES
Related products
dormakaba Active infrared safety beam for automatic sliding doors
Technical specifications
dormakaba Canada Inc.
1680 Courtney Park Dr. Unit 13
Mississauga, ON L5T 1R4
800.387.4938
www.dormakaba.ca
dormakaba USA Inc.
Dorma Drive, Drawer AC
Reamstown, PA 17567
844-SPECNOW
www.dormakaba.us
Model OS-12C T
Installation
distance
Less than 32’ 10" (10 m)
Detection
method
Point to point near infrared light beam
Power supply 12 to 24 V AC / 12 to 30 V DC
Current draw 160 mA max.
Operation
indicator Stand-by
Beam 1 / Beam 2
Green ON / Red ON
Detection active Green OFF / Red OFF
Insufficient sensitivity Green Blink / Red Blink
Test input error: Simultaneous twice blinking
(Red & Green)
Test input Opto coupler voltage 5 to 30 V DC
Current 6 mA max. (30 V DC)
Safety output
(initial setting)
50 V 0.3 A (resistance load) –
N.O./N. C. switchable
Response
time
Approx. 0.1 sec. (from the moment of beam
cut-off)
Relay hold
time
Approx. 0.5 sec.
Operating
temperature
-4°F to +131°F (-20°C to +55°C)
Weight Amplifier 2.2 oz (63 g)
Component 1 Amplifier
2 Mounting screws
1 Manual
Sensor head units are required for operation;
sold separately
Notes
• OS12C-T amplifier can operate with 1 or 2 pairs of sensor heads.
• The specifications herein are subject to change without prior
notice due to improvements.
EO 8.18
DX3335-016 dimensional drawing
1/16" (2) 1/2" (13)
1/16" (2) 1/2" (13)
Mounting hole 12 mm
Amplifier Sensor heads
One push installation type
Mounting hole 12 to 13 mm
Shied wire
10 m
Shied wire
10 m
M 10
P 0.75
3-3/8" (86)
3-11/16" (93)
5/8"
(15)
1-3/8" (35)
1-13/16"
(46)


Produktspezifikationen

Marke: Dormakaba
Kategorie: Nicht kategorisiert
Modell: OS-12C T

Brauchst du Hilfe?

Wenn Sie Hilfe mit Dormakaba OS-12C T benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Dormakaba

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-