Dormakaba La Gard 1947 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Dormakaba La Gard 1947 (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Opening the lock – Using the
OPENING INDEX
The lock is shipped with the factory
combination of 50. To open, turn dial to the
LEFT passing 50 at least fi ve times then
stop when 50 lines-up with the OPENING
Index. Turn RIGHT until dial stops, this will
retract the bolt.
To open the lock using a set combination,
for EXAMPLE 10-20-30-40, use the
following procedures:
Using the OPENING Index (see Figure 1)
1. Turn the dial to the LEFT (counter-clockwise) at least fi ve complete rotations to clear
the lock; the lock is now ready to accept the combination. Never spin the dial to clear
the lock.
2. Using the OPENING index, turn the dial RIGHT (clockwise) passing the fi rst number
in the combination [10] four times. Then stop exactly on the number [10] the fi fth time.
3. Turn the dial LEFT (counter-clockwise) passing the next number in the combination
[20] three times. Then stop exactly on the number [20] the fourth time.
4. Turn the dial RIGHT (clockwise) passing the next number in the combination [30] twice.
Then stop exactly on the number [30] the third time.
5. Turn the dial LEFT (counter-clockwise) passing the last number in the combination
[40] one time. Then stop exactly on the number [40] the second time.
6. Turn the dial to the RIGHT (clockwise) to open the lock. The lock bolt is fully
retracted when the dial no longer turns right.
To lock the combination lock, turn the dial ve complete rotations to the LEFT.
Change the combination – Using the CHANGING INDEX
To change the combination, you will need to know the existing combination and have a
LA GARD 4-Wheel change key (P/N 1315). When selecting a combination choose a four
number sequence from 0 - 99, for security purposes. It is recommended that you do not
select a combination from personal data (such as birth date, phone number, etc). Never
select numbers 0 to 20 as the LAST NUMBER of the combination; this is the “Forbidden
Zone.”
OPERATING AND CHANGING INSTRUCTIONS
4-Wheel Locks
Group 1 Locks
© copyright 2008 (P/N) 12
-205 v2 •
4/08 Kaba Mas LLC
Page 1 of 2
Figure 1
To change the combination, you must fi rst open the safe door by dialing the existing
combination using the OPENING index. Note: before changing the combination verify
that the dial stopped between 90 and 0 on the OPENING index when the bolt is fully
retracted.
Setting a Combination – Using the CHANGING INDEX
Dial the existing combination as previously described using the CHANGING Index (see
Figure 1). STOP the dial on the fourth number of the combination.
1. Insert the change key into the change key
hole (see Figure 2). If the change key does
not go in easily, the wheels are not aligned
for changing. Redial the existing
combination using the CHANGING Index.
2. Turn the change key to the RIGHT until
it stops (approximately one-quarter turn).
Leaving the key in the lock, set the new
combination. EXAMPLE 10-20-30-40
3. Next turn the dial to the LEFT (counter-
clockwise) at least fi ve complete rotations to
clear the lock; the lock is now ready to
accept the new combination. Never spin the dial to clear the lock.
4. Using the CHANGING index, turn the dial RIGHT (clockwise) passing the rst number
in the combination [10] four times. Then stop exactly on the number [10] the fi fth time.
5. Turn the dial LEFT (counter-clockwise) passing the next number in the combination [20]
three times. Then stop exactly on the number [20] the fourth time.
6. Turn the dial RIGHT (clockwise) passing the next number in the combination [30] twice.
Then stop exactly on the number [30] the third time.
7. Turn the dial LEFT (counter-clockwise) passing the last number in the combination [40]
one time. Then stop exactly on the number [40] the second time.
8. Turn the change key to the LEFT and remove the change key. The new combination
has been set.
To test, dial the new combination using the OPENING index. ALWAYS perform this test
with the safe door open! Test several times before closing the safe door. Also check that
the dial stops between 90 and 0 on the OPENING index when the bolt is fully retracted.
Note: When locking the safe always turn the safe handle, if present, to the locked
position (bolts extended) before turning the lock dial (fi ve complete rotations to the
LEFT) to relock. If you notice any resistance DO NOT force the dial to turn. This may
cause damage to the lock.
© copyright 2008 (P/N) 12
-205 v2 •
4/08 Kaba Mas LLC
Page 2 of 2
Figure 2


Produktspezifikationen

Marke: Dormakaba
Kategorie: Nicht kategorisiert
Modell: La Gard 1947

Brauchst du Hilfe?

Wenn Sie Hilfe mit Dormakaba La Gard 1947 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Dormakaba

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-