Dormakaba EML 310 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Dormakaba EML 310 (21 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/21
Header Installation Instructions with
EML 310/320 and 371/372
For 4-1/8”, 4-1/2”, 6” Headers
For use with DRS Rails and Patch Fittings
Installation instructions
933903 – 07-2019
| | EN
2EML Header Shim 07-2019933903
dormakaba Header Installation Instructions with EML310/320 and 371/372
For use with DRS Rails and Patching Fittings (4-1/8”, 4-1/2”, 6” Headers)
Table of Contents
Table of contents
1  Technical specifications 3
1.1 RTS88 and PT21 Header
Specification Overview 3
1.1.1 General information 3
1.1.2 Glass requirements/fittings/mounting 3
1.1.3 Requirements for glass panel 3
1.1.4 Safety instructions 3
1.1.5 Symbols used - Safety/Installation 3
1.1.6 Maintenance, care, repair 3
1.1.7 Disposal 3
1.2 EML310 and EML320 Specifications Overview 4
1.1.1 General information 4
1.1.2 Listings 4
1.1.3 Conditions of acceptability 4
1.1.4 EML310/320 Mechanical specifications:
(Including 1/4” [6.4] mounting bracket) 4
1.1.5 EML371/372 Mechanical specifications:
(Including 3/16” [4.8] mounting bracket) 5
1.1.6 Environmental specifications: 5
1.1.7 EML310/320 Electrical specifications: 5
1.1.8 EML371/372 Electrical specifications: 5
1.1.9 Inspection and Maintenance 5
1.3 EML header options 6
1.4 Pin diameter specifications 7
2 RTS88 and PT21 installation instructions 8
2.1 Install header for single or double door: RTS88 8
2.2 Install header for single or double door: PT21 9
2.3 RTS88 adjustments 10
2.4 PT21 adjustments 10
3 EML and shim installation instructions 11
3.1 Prepare/disassemble mag lock body
and mounting plate 11
3.2 Secure header shim to frame/ceiling surface
(for 4-1/8” or 4-1/2” headers only) 11
3.3 Secure mounting bracket and mag lock to shim
(for 4-1/8” or 4-1/2” headers only) 12
3.4 Secure mounting bracket and mag lock to shim
(for 6” headers only) 13
4 Install armature plate 14
4.1 (For use with patch fittings only)
secure glass door bracket (GDB) 14
4.2 (For use with DRS rails only) 15
5 EML310/320 and 371/372 Options 16
5.1 Instant release of lock 16
5.2 Lock monitoring options - BA -
Bond Alert Sensor 16
5.3 Lock monitoring options - DP -
Door Position Sensor 16
6 Wiring the EML 17
6.1 Wiring mag lock body through header
(for EML310/320 and 371/372) 17
6.2 Wiring mag lock body
(for EML310/320) - continued 18
6.3 Wiring for BA or BA DP combination models
(for EML371/372) 19
6.4 Wiring for Unmonitored or DP sensor models
(for EML371/372) 19
7 EML310/320 and 371/372
trouble shooting guide 20
dormakaba Header Installation Instructions with EML310/320 and 371/372
For use with DRS Rails and Patching Fittings (4-1/8, 4-1/2”, 6” Headers)
933903 07-2019EML Header Shim 3
Technical specifications
1  Technical specifications
These instructions are for installation of the EML
310/320 and 371/372, EML Header Shim, with RTS88
and PT21 Headers for the following ceiling mounting.
1.1.1 General information
dormakaba requires use of tempered monolithic or
tempered laminated glass.
dormakaba glass hardware is not suitable for harsh
environment; for example, applications where
chemicals (e.g. chlorine) are used such as indoor
swimming pools, saunas, or salt-water pools.
Do not swing doors with excessive force. Install
limiting stop to prevent door from opening too far.
1.1.2 Glass requirements/fittings/mounting
The substructure/wall must be able to bear
permanent loads, and be level (max. tolerance:
1/16” [2] per 39” [1m]).
Fasteners must be sufficiently dimensioned for the
substructure/wall and weight of the door.
When adjusting glass elements, always stick to the
required clearance for the respective hardware.
Adjust clearance so glass does not come in contact
with any hard surfaces such as glass, metal or
concrete.
Do not use excessive force when installing the glass
(avoid over tightening screws.)
1.1.3 Requirements for glass panel
dormakaba requires use of fully tempered glass,
which complies with ASTM C 1036 and ASTM C
1048. Secondary heat soaking processes are
optional but not required.
Clamping area must be flat and uncoated (no
self-cleaning coating!)
Never use glass with conchoidal fractures and/or
damaged edges.
1.1.4 Safety instructions
Installation requires two people.
Always wear protective clothing.
Only properly qualified and specially trained staff
are authorized to mount dormakaba glass
hardware.
Due to crushing hazards and possible injury caused
by breakage of glass during mounting,
corresponding protective clothing (especially gloves
and protective goggles) is required.
Never clamp metal fitting hardware directly to
glass surface.
1.1.5 Symbols used - Safety/Installation
CAUTION
Mounting components must meet the
requirements of substructure/wall and door
weight. Please read the technical information
for fittings.
WARNING
Risk of breaking glass. When installing the
door, support the door panel with a block of
wood or similar object.
TIPS AND RECOMMENDATIONS
Universal PT21 pin diameter: 5/8” [15]
MUNDUS PT21 pin diameter: 9/16” [14]
1.1.6 Maintenance, care, repair
Immediately replace damaged parts.
Always use original dormakaba parts.
Clean clamping area with alcohol-based standard
commercial cleaning agent before mounting the
glass hardware.
Use a damp cloth for occasional cleaning.
Always use silicone - and oil-free cleaners (e.g.
acetone).
Check glass hardware at regular intervals for
proper positioning, smooth operation and correct
adjustment.
High traffic door systems require inspection by
properly qualified staff (specialized companies or
installation firms.)
1.1.7 Disposal
Disposal in accordance with local, state and national
regulations.
1.1 RTS88 and PT21 Header Specification Overview


Produktspezifikationen

Marke: Dormakaba
Kategorie: Nicht kategorisiert
Modell: EML 310

Brauchst du Hilfe?

Wenn Sie Hilfe mit Dormakaba EML 310 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Dormakaba

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-