Dometic Optima Tension Bedienungsanleitung

Dometic Nicht kategorisiert Optima Tension

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Dometic Optima Tension (7 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/7
This manual must be read and
understood before installation,
adjustment, service, or mainte-
nance is performed. This unit must
be installed by a qualiîš¿ed service
technician. Modification of this
product can be extremely hazard-
ous and could result in personal
injury or property damage.
Lire et comprendre ce manuel avant
de procéder à l'installation, à des ré-
glages, de l'entretien ou des répara-
tions. L'installation de cet appareil doit
être effectuée par un réparateur quali-
é. Toute modication de cet appareil
peut être extrêmement dangereuse et
entraîner des blessures ou dommages
matériels.
USA
SERVICE OFFICE
Dometic Corporation
1120 North Main Street
Elkhart, IN 46514
CANADA
Dometic Corporation
46 Zatonski, Unit 3
Brantford, ON N3T 5L8
CANADA
SERVICE CENTER &
DEALER LOCATIONS
Please Visit:
www.eDometic.com
RECORD THIS UNIT INFORMATION FOR
FUTURE REFERENCE:
Model Number ____________________
Serial Number ____________________
Date Purchased ____________________
Important: These Instructions
must stay with unit.
Owner read carefully.
REVISION A
Form No. 3311799.000 10/16
(French 3311803.000_A)
©2016 Dometic Corporation
LaGrange, IN 46761 U.S.A.
INSTALLATION &
OPERATING INSTRUCTIONS
Optima Plus
Tension Rafter
OPTIMA PLUS
A&E Optima Tension Rafter/Cradle Support
Optima Plus Installation & Operating
2
GENERAL INFORMATIONSAFETY INSTRUCTIONS
This manual has safety information and instruc-
tions to help users eliminate or reduce the risk
of accidents and injuries.
RECOGNIZE SAFETY INFORMATION
This is the safety-alert symbol. When you see this
symbol in this manual, be alert to the potential
for personal injury.
Follow recommended precautions and safe op-
erating instructions.
UNDERSTAND SIGNAL WORDS
A signal word , WARNING CAUTION OR is used
with the safety-alert symbol. They give the level
of risk for potential injury.
indicates a potentially hazard-
ous situation which, if not avoided, could result
in death or serious injury.
indicates a potentially hazard-
ous situation which, if not avoided, may result in
minor or moderate injury.
used without the safety alert
symbol indicates, a potentially hazardous situa-
tion which, if not avoided, may result in property
damage.
Read and follow all safety information and in-
structions.
These instructions must be read and under-
stood before installation of this kit. This kit
must be installed by a Dometic Service Cen-
ter or a qualiîš¿ed service technician. Modiîš¿-
cation of this product can be extremely haz-
ardous and could result in personal injury or
property damage.
A&E OPTIMA TENSION
RAFTER SYSTEM
INSTALLATION INSTRUCTIONS
For Installation of: A&E Optima Tension
Rafter/Cradle Support;
Optima Plus tension rafter must be
used with all Universal Plus FRTA's over 21' in length.
Failure to do so could result in damage to FRTA and/or
hardware.
IMPORTANT: Read and understand the entire installa-
tion procedure before starting installation.
NOTE: The Dometic Corporation assumes no liability for
damages or injuries resulting from installation or opera-
tion of this product.
The Dometic Corporation reserves the right to
modify appearances and speciîš¿cations without
notice.
Optima Plus Installation & Operating
3
INSTALLATION OF TENSION RAFTER
Tools Required:
• Measuring Tape
• Electric Drill
• Drill Bits: #7 or 3/16"; 5/16"
• Center Punch
• Phillips Screwdriver
• Silicone Sealant
• ladder
• Pencil
• Wrench or Socket: 7/16"
• Pop Rivet Gun (Necessary only if backing plate is needed)
A. Install Black Adjustment Knob (see
FIG.1)
1. Attach the Tension rafter to the top bracket/pad
assembly with the 1/4-20 x 2-1/2" hex head bolt
and 1/4-20 lock nut with nylon insert provided.
(FIG 2A)
2. With awning closed, position the tension rafter at
the center of the awning so that it has a minimum
of 69" of unobstructed clearance below the aw-
ning rail. If windows and/or service accesses in-
terfere, relocate tension rafter as close to center
of awning as the situation will allow. (See FIG.
2B).
3. While holding tension rafter vertically at mounting
location, carefully set roller bracket end of tension
rafter on ground and loosen black adjustment
knob on side of tension rafter.
4. With tension rafter still resting on ground, extend
the tension rafter up so that the top of the tension
rafter almost touches the bottom of the closed
awning.
Black adjustment
Knob
Tension Rafter
FIG. 1
Awning Length
Equal Equal
Awning
Optima Plus
Tension Rafter
Note: When installing two tension rafters
divide awning length into three equal parts.
1/4" X 2-1/2"
Hex Head Bolt
Pad
Tension Rafter
Top Bracket
1/4"-20 Lock Nut
with Nylon Insert
Top Cradle
FIG. 2A
FIG. 2B
Pad Bottom
of Closed
Awning
Vehicle
90°
Right
Angle
Top
Bracket
Tension
Rafter
Important: For
tension rafter to
operate correctly,
bracket, cradle
and rafter must be
mounting at right
angles as shown.
90°
Right
Angle
5. Lock black adjustment knob on side of awning.
6. Carefully climb ladder. With tension rafter still
resting on the ground, position the top bracket/
pad assembly against the vehicle so that the top
cradle of the tension rafter touches the bottom of
the closed awning as shown in FIG. 3.
NOTE: It may be necessary to slightly extend the tension
rafter further to obtain the right angle shown in FIG. 3.
IMPORTANT: Tension rafter, top cradle, top bracket,
and vehicle MUST form right angles as shown in FIG.
3 for tension rafter to operate correctly.
7. Once right angles are established, mark location
of mounting holes in top bracket on vehicle.
8. Detach top bracket/pad assembly from tension
rafter by removing the 1/4-20 x 2-1/2" hex head
bolt and 1/4-20 lock nut.
FIG. 3


Produktspezifikationen

Marke: Dometic
Kategorie: Nicht kategorisiert
Modell: Optima Tension

Brauchst du Hilfe?

Wenn Sie Hilfe mit Dometic Optima Tension benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Dometic

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-