DLS CAD 15 Bedienungsanleitung
DLS
Autoradio - CD Player
CAD 15
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für DLS CAD 15 (12 Seiten) in der Kategorie Autoradio - CD Player. Dieser Bedienungsanleitung war für 37 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/12
How to install and operate
the
DLS CAD11
&
DLS CAD15
digital mono amplifiers
Welcome!
This owners manual is written in easy english and
uses a lot of drawings to simply the installation and
use of the above amplifier.
Your DLS amplifier must be installed correctly in or-
der to work well. This manual will show you how to
install the amplifier like a pro. Please read the entire
manual before beginning the installation.
Install the amplifier yourself if you feel confident with
our instructions and if you have the proper tools.
However if you feel unsure, turn over the installa-
tion job to someone better suited to it.
Warranty Service
This amplifier is covered by warranty, depending
on the conditions in the country where it is sold. If
the amplifier is returned for service, please include
the original dated receipt with the product.



Technical Assistance
For technical assistance ask the shop where the
product was sold or the distributor in your very coun-
try.
You can always phone the DLS Helpdesk in Sweden
+ 46 31 84 00 60 or send an e-mail to info@dls.se.
Information can also be found on our WEB-site
www.dls.se
Contents
Specifications................................ 1
Features…………………………….. 2
Installation…………………….……. 2
Tools and materials needed………. 3
Amplifier installation kit………….... 3
Routing Wires…………………….... 3
Wiring
Power and Outputs……………..…. 4
Inputs and controls………………... 5
Input level control.......................... 5
Crossovers…………...................... 5
Phase control.....………………...… 5
Bass boost control......................... 6
Remote bass level control............. 6
Speaker wiring:
Single amplifier system………….…. 6
Testing............................................. 6
Bridging two CAD11......................... 7
Bridging two CAD15........................ 8
Subwoofer connections…………….. 9
Professional tips............................... 10
Technical data.................................. 11
Trouble shooting.............................. 11
DLS Svenska AB
P.O. Box 13029
S-40251 Göteborg, Sweden
Tel: +46 31 840060
Fax: +46 31 844021
E-mail: info@dls.se
www.dls.se
DLS Svenska AB - 2007-01-10
We follow a policy of continuous advancement in
development. For this reason all or part of specifications
& designs may be changed without prior notice.
Approval of electromagnetic compatability according
to the EEC Directive 95/54/EC
E 13 CAD15 approval No: 022944
CAD11 approval No: 022495
CAD11 &15 include
î‚ŠRCA input and output


î‚ŒHigh level input with auto start
î‚ŠContinuous variable low pass crossover


î‚ŒContinuous variable subsonic crossover
î‚ŠBass boost feature
î‚ŠRemote bass level control
î‚ŠPhase control cont. variable 0-180 degrees
î‚ŠBridge mode master / slave selector
î‚ŠElectronic protection circuitry against
short-circuit, DC offset and thermal overload.
Installation
Before you begin the install
Before you begin you need to read the manual, to have
some tools, cables and other material available. There
is one such list of material on the following page.
Amplifier location
Important
Allow air circulation around the amplifier.
2
Disconnect Battery
Before starting the instal-
lation, always disconnect
the negative terminal of
the battery.
The DLS Peformance series of amplifiers have a
compact design that allows great flexibility in
mounting. You can mount it under a seat or in the
trunk.
When you select a location, do remember that the
amplifier generates a lot of heat.
Choose a location where air can circulate freely
around the amplifier. Do not cover the amplifier with
carpets or hide behind trim panels.
Do not mount the amplifier in an inverted or upside
down position.
Check all locations and placements carefully before
making any cuts, drilling any holes or making any
connections.
This is the best direction to
mount the amplifier to get
the best cooling.
CAD11, CAD15
DLS logo on amplifier cooling flange
The DLS logo on top of the amplifier is attached
with two hex. screws. The logo can be removed
and twisted 90 or 180 degrees, and then screwed
back in wanted position. The logo can be mounted
in four different ways to match your installation.
Removal of side flanges
In order to fasten the amplifier to the surface and
connect speaker and power cables, the flanges on
the sides must be removed. This is done by
loosening the hex screws on top of the amplifier.
Use a 3 mm hex key.
Remove these
screws using a 3
mm hex. key for
removal of side
flange. Remount
after fastening the
amplifier and
connection of the
speaker and power
cables.
Tools and material needed
Tools:
î‚Šî‚Š
î‚Šî‚Š
î‚ŠFlat and Phillips screwdrivers
î‚Šî‚Š
î‚Šî‚Š
î‚ŠWire cutter
î‚Šî‚Š
î‚Šî‚Š
î‚ŠWire stripper
î‚Šî‚Š
î‚Šî‚Š
î‚ŠElectric drill with drills
î‚Šî‚Š
î‚Šî‚Š
î‚ŠCrimping tool
î‚Šî‚Š
î‚Šî‚Š
î‚ŠDigital multimeter or test lamp
î‚Šî‚Š
î‚Šî‚Š
î‚ŠWire brush, scraper or a piece
of an abrasive sheet to remove
paint for a good ground connection
î‚ŠGrease to protect the ground
connection from corrosion
Material:
î‚ŠSpeaker wire: minimum
12 AWG = 4 mm2 for subwoofers
î‚ŠSheet metal screws for mounting the
amplifier to the amplifier board and the
amplifier board to the car + some extra
for fuse holder, amplifier ground etc.
î‚Šî‚Š
î‚Šî‚Š
î‚ŠElectrical insulation tape
½ inch thick plywood or particle board for
the amplifier to be mounted upon.
Amplifier installation kit:
If available,buy an amplifier installation kit. It
contains normally all you need. This is what you
have to buy if you buy the items separately
î‚Š20- 25 feet = 6- 7.5 meter power cable,
preferably AWG 0 (50 mm2 ) for CAD15 &
4AWG (21mm2) for CAD11
î‚Š1 pc of ANL fuseholder to install close to the
car battery + fuse. CAD11= 150A, CAD15=
200A
î‚Š20 feet of AWG 15 = 1,5 mm2 wire for
remote turn on / off cable from radio.
î‚ŠRCA-cable for input from radio.
- 20 feet or 5 meter for trunk installations
-12 feet or 2 – 3 meter for under seat
installations
î‚ŠOne ring crimp terminal
for the amplifier ground connection.
î‚ŠWire ties
î‚ŠInsulating grommet or insulating tube
Routing wires
Stereo
head unit
3
Professional Tip:
If amplifier installation kits are available with diffe-
rent size of power cable, chose the most heavy
power cable to improve sound quality and to allow
more amplifiers to be installed now or later.
If possible buy AWG 0 = 50 mm2 (or heavier) cable
for best performance of CAD15, or AWG4 (21 mm2)
for CAD11.
High current draw
The CAD11 / 15 are mono amplifiers with high power
output. The current draw is also high so you must make
sure that your vehicles power system (battery and
alternator) can provide all the power you need. If you
have a bad battery or alternator in can result in a poor
sound or even worse, a broken battery or alternator.
CAD11, CAD15
Produktspezifikationen
| Marke: | DLS |
| Kategorie: | Autoradio - CD Player |
| Modell: | CAD 15 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit DLS CAD 15 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Autoradio - CD Player DLS
4 Mai 2023
4 Mai 2023
4 Mai 2023
Bedienungsanleitung Autoradio - CD Player
Neueste Bedienungsanleitung für -Kategorien-
25 April 2023