Digitus DN-13003-2 Bedienungsanleitung

Digitus Printserver DN-13003-2

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Digitus DN-13003-2 (12 Seiten) in der Kategorie Printserver. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
USB 2.0
ETHERNET PRINT SERVER
Quick Installation Guide
DN-13003-2
2
Before you start, you should prepare the following items:
Windows 2000/XP/2003/Vista/7/8/10 computer with print server setup CD
One Printer(non-GDI/CAPT)
One Printer cable
One 802.11b/g/n Access Point (optional)
Wired Network with Print Server:
Printer Print Server
Computer Computer Computer
HUB
Factory Default Settings:
Password:
IP Address: 192.168.0.10
Subnet Mask: 255.255.255.0
Hardware Installation:
1. Turn off the printers power.
2. Connect the print server to your printer with the supplied printer cable.
3. Turn the printer’s power on.
4. Plug the AC power adapter into the power connector on the print server.
5. Wait 40 seconds as part of the print server’s Power On Self Test (POST).
3
Prepare Your Computer to Connect Print Server first:
1. Please specify a proper IP address for your wireless adapter, e.g.192.168.0.101.
Software Installation:
1. To enable network communication with print server, your computer must have a proper
IP address, e.g. 192.168.0.101 (the print servers default IP is 192.168.0.10)
2. Insert the setup CD into your CD-drive. The autorun program will be started.


Produktspezifikationen

Marke: Digitus
Kategorie: Printserver
Modell: DN-13003-2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Digitus DN-13003-2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten