Digi XBee S2C Mesh 2.4 Kit Bedienungsanleitung

Digi Nicht kategorisiert XBee S2C Mesh 2.4 Kit

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Digi XBee S2C Mesh 2.4 Kit (45 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 88 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/45
XBee S2C DigiMesh 2.4 Kit
Radio Frequency (RF) Module
Getting Started Guide
Revision history—90001526
Revision Date Description
A August2016 Initial release.
B June 2017 Modified regulatory and certification information as required by RED
(Radio Equipment Directive).
C May 2018 Updated the SMTinsertion picture. Added a warning to never insert or
remove the XBee device while the power is on.
Trademarks and copyright
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United
States and other countries worldwide. All other trademarks mentioned in this document are the
property of their respective owners.
© 2018 Digi International Inc. All rights reserved.
Disclaimers
Information in this document is subject to change without notice and does not represent a
commitment on the part of Digi International. Digi provides this document as is,” without warranty of
any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or
merchantability for a particular purpose. Digi may make improvements and/or changes in this manual
or in the product(s) and/or the program(s) described in this manual at any time.
Warranty
To view product warranty information, go to the following website:
www.digi.com/howtobuy/terms
Send comments
Documentation feedback: To provide feedback on this document, send your comments to
techcomm@digi.com.
Customer support
Digi Technical Support: Digi offers multiple technical support plans and service packages to help our
customers get the most out of their Digi product. For information on Technical Support plans and
pricing, contact us at +1 952.912.3444 or visit us at www.digi.com/support.
XBee S2C DigiMesh 2.4 Kit Getting Started Guide 2
Contents
XBee S2C DigiMesh 2.4 Kit Getting Started Guide
Set up your XBee devices
Before you begin 7
Verify XBee RF module kit contents 7
Gather required materials 8
Step 1: Assemble the hardware 9
How to unplug an XBee module 10
Step 2: Download and install XCTU 10
Install XCTU - Windows 11
Install XCTU - Linux 11
Install XCTU - OSX 11
Optional: Install XCTU updates 12
Step 3: Set up your first wireless connection 12
Add XBee modules to XCTU 12
Configure the first two XBee modules in transparent mode 15
Check the network 17
Send messages through XCTU 17
Step 4: Create a mesh network 19
Connect a loopback jumper to an XBee module 19
Set up a third XBee module to create a mesh network 20
Step 5: Use API mode to talk to XBee modules 23
Configure an XBee module in APImode 23
Send an API Tx frame from an XBee module to another module 23
Do more with your XBee devices
Update the firmware of your XBee modules 30
Configure remote XBee modules 30
Set up and perform a range test 32
Configure the XBee modules for a range test 32
Perform a range test 33
Troubleshooting
Cannot find the serial port for the module 38
Cannot identify XBee modules 38
Cannot install device driver 38
Potential cause 38
XBee S2C DigiMesh 2.4 Kit Getting Started Guide 3


Produktspezifikationen

Marke: Digi
Kategorie: Nicht kategorisiert
Modell: XBee S2C Mesh 2.4 Kit

Brauchst du Hilfe?

Wenn Sie Hilfe mit Digi XBee S2C Mesh 2.4 Kit benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Digi

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-