Digi X4-Z11-E-A Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Digi X4-Z11-E-A (37 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/37
ConnectPort® X4
Getting Started Guide
90001248_C
3/10/2014
© 2014 DigiInternationalInc. 2
©2014 Digi International Inc.
All rights reserved.
ConnectPort®, Digi, Digi International, the Digi logo, the Digi website, a Digi International Company, and
ConnectPort X are trademarks or registered trademarks of Digi International, Inc. in the United States and other
countries worldwide. All other trademarks are the property of their respective owners.
All other trademarks mentioned in this document are the property of their respective owners.
Information in this document is subject to change without notice and does not represent a commitment on the
part of Digi International.
Digi provides this document “as is,” without warranty of any kind, either expressed or implied, including, but
not limited to, the implied warranties of fitness or merchantability for a particular purpose. Digi may make
improvements and/or changes in this manual or in the product(s) and/or the program(s) described in this manual
at any time.
This product could include technical inaccuracies or typographical errors. Changes are periodically made to the
information herein; these changes may be incorporated in new editions of the publication.
© 2014 DigiInternationalInc. 3
Table of Contents
Introduction to the ConnectPort X4 5............................................................................ 5
Important Information Regarding Your Device....................................................... 5
Using this Guide...................................................................................................... 5
Digi Information....................................................................................................... 6
• Contact Information ...........................................................................................6
Chapter 1: ConnectPort X4 Ethernet Models ....................................................... 7
Connecting to the ConnectPort X4 Home Page..................................................... 7
Configuring Ethernet Settings for the ConnectPort X4 ........................................ 10
ConnectPort X4 Ethernet IP Settings Page ......................................................... 10
Viewing ConnectPort X4 IP Address Information ................................................ 11
Viewing ConnectPort X4 Ethernet Statistics ....................................................... 11
X4 Smart Energy................................................................................................... 11
Chapter 2: ConnectPort X4 Cellular Models....................................................... 12
Connecting to the ConnectPort X4 Home Page................................................... 12
Configuring the ConnectPort X4 Cellular Interface.............................................. 13
GSM/Edge Cellular Configuration Example (AT&T) ..............................................13
CDMA Cellular Configuration Example (Verizon) .................................................15
CDMA Cellular Configuration Example (Sprint) ....................................................18
Verifying the ConnectPort X4 Cellular Connection Status................................... 21
Configuring the ConnectPort X4 IP Gateway Priority .......................................... 22
Configuring the ConnectPort X4 Ethernet Interface............................................. 23
Viewing ConnectPort X4 IP Address Information ................................................ 24
Viewing ConnectPort X4 Ethernet Statistics ........................................................ 26
Chapter 3: ConnectPort X4 WiFi Models ............................................................. 27
Connecting to the ConnectPort X4 Home Page................................................... 27
© 2014 DigiInternationalInc. 4
ConnectPortX4GettingStarted Guide
Configuring the ConnectPort X4 WiFi Interface ................................................... 29
ConnectPort X4 WiFi IP Settings Page ................................................................30
ConnectPort X4 WiFi LAN Settings Page ............................................................31
ConnectPort X4 WiFi Security Settings Page .......................................................32
ConnectPort X4 DHCP Server Settings Page ......................................................33
Verifying the ConnectPort X4 WiFi Connection Status........................................ 34
Configuring the ConnectPort X4 IP Gateway Priority .......................................... 35
Configuring the ConnectPort X4 Ethernet Interface............................................. 36
Viewing ConnectPort X4 IP Address Information ................................................ 37
Viewing ConnectPort X4 Ethernet Statistics ........................................................ 37
© 2014 DigiInternationalInc. 5
Introduction to the ConnectPort X4
Important Information Regarding Your Device
Your device is configured to automatically register with a Device Cloud Technical Support Account when
you first power up your device*. Activation with Device Cloud Technical Support is free. Our Device
Cloud Technical Support team will only access your device upon your approval. With your consent, the
Device Cloud Technical Support team to your device to diagnose and is afforded visibility and access
resolve issues, should you require assistance.
For any support queries, please contact the Device Cloud Customer Support Center by phone at
952.912.3456 or via our web portal at: http://www.digi.com/support/eservice/login.jsp?p=true
Should you wish to forego the enhanced service and benefits that automated registration with Device
Cloud Technical Support provides, you can disable this feature via the gateway’s web UI:
Open the web UI of the gateway using the method outlined in the Quick Start Guide
Navigate to the Configuration > Device Cloud section
From the “Short Messaging” menu, uncheck the box labeled Opt-in.
To completely disable SMS, uncheck the box labeled Enable SMS.
Uncheck the box labeled Enable Device-Initiated Device Cloud Connection.
Click Apply.
Reboot the gateway
*The registration process involves sending a single SMS message containing the device’s mobile phone
number. Network costs associated with this single SMS transmission are the customers responsibility.
Any device information stored in the Device Cloud Technical Account is secured with adherence to
Device Cloud security and privacy procedures, and will not be disclosed to, or accessible by third parties.
If you currently configure your Digi device using a configuration file (defaults.rci), then in order to disable
this feature, you will have to update that file.
Using this Guide
This guide is meant to be used in conjunction with Digi’s ConnectPort X4 Quick Start Guides. Depending
on which ConnectPort X4 model you have purchased, all of the information in this guide will not be
© 2014 DigiInternationalInc. 6
ConnectPortX4Configuration Guide
relevant to the configuration of your ConnectPort X4. To determine which chapters of this guide are
relevant to your ConnectPort X4 refer to the following chart:
Digi Information
Contact Information
For more information about your Digi products, or for customer service and technical support, contact
Digi International.
If you have a Refer to chapter
ConnectPort X4 with Ethernet
ConnectPort X4 IA with Ethernet
ConnectPort X4 for Smart Energy with Ethernet
1
ConnectPort X4 with Cellular and Ethernet
ConnectPort X4 IA with Cellular and Ethernet 2
ConnectPort X4 with WiMAX and Ethernet
ConnectPort X4 IA with WiMAX and Ethernet 3
ConnectPort X4 with Wi-Fi and Ethernet
ConnectPort X4 IA with Wi-Fi and Ethernet 4
To contact Digi International by Use
Mail
Digi International
World Headquarters
11001 Bren Road East
Minnetonka, MN 55343
Phone 1-877-434-4439 or
1-952-912-3456
Web www.digi.com/support
© 2014 DigiInternationalInc. 7
Chapter 1: ConnectPort X4 Ethernet Models
By default, ConnectPort X4 Ethernet models are configured to be DHCP clients. In order to configure your
device, simply put it on an Ethernet network with a DHCP Server.
Connecting to the ConnectPort X4 Home Page
If you already know the IP address of your ConnectPort X4 open a web browser and type in the IP address,
otherwise use the Digi Device Discovery Utility.
To download the Digi Device Discovery Utility:
1. Navigate to http://www.digi.com/connectportx4 and then click on the “Download: Digi Device
Discovery Utility” link.
2. Click the “Download your file” link and then follow the prompts to install the application.
3. Run the Digi Device Discovery Utility from your PC’s Start Menu (Digi > Digi Device Discovery >
Digi Device Discovery), if it is not already open.
© 2014 DigiInternationalInc. 8
ConnectPortX4GettingStarted Guide
4. Once the application opens, locate your device within the Digi Device Discovery Application
Devices List. The IP address of your device should be displayed.
5. Open a web browser and type in the IP address of your ConnectPort X4 device. This will open the
ConnectPort X4’s Home page.
© 2014 DigiInternationalInc. 9
ConnectPortX4GettingStarted Guide
After you enter the IP address of the ConnectPort X4 into your web browser, you will see a screen similar
to the following:
© 2014 DigiInternationalInc. 10
ConnectPortX4GettingStarted Guide
Configuring Ethernet Settings for the ConnectPort X4
To configure your device’s Ethernet settings open the Ethernet Network Configuration page by clicking on
Configuration > Network from the left-hand menu.
Within the Network Configuration page various Ethernet parameters can be configured depending on your
type of installation. Basic settings can be configured in the Ethernet IP Settings page.
ConnectPort X4 Ethernet IP Settings Page
The Ethernet IP Settings page (shown in the image above) allows you to set your device to obtain IP
addresses automatically (using DHCP) or enter in your own IP address.
Configure your Ethernet IP settings as desired, click Apply when finished.
© 2014 DigiInternationalInc. 11
ConnectPortX4GettingStarted Guide
Viewing ConnectPort X4 IP Address Information
The ConnectPort X4 Home page will display the IP address of the unit.
Viewing ConnectPort X4 Ethernet Statistics
To view information about the Ethe d IP statistics, navigate to the rnet Link as well as Ethernet an
Administration > System Information > Network page.
X4 Smart Energy
For information regarding connecting your Smart Energy device with the Veris Clamp, reference the X4
Smart Energy Quick Start Guide http://www-qa.digi.com/
You have completed basic configuration of your ConnectPort X4.
© 2014 DigiInternationalInc. 12
Chapter 2: ConnectPort X4 Cellular Models
The ConnectPort X4 cellula interfaces. By default, the Ethernet r models have cellular and Ethernet
interface is configured as a DHCP Server with a static IP Address of 192.168.1.1. This configuration
simplifies the initial configuration of the unit.
Connecting to the ConnectPort X4 Home Page
1. Connect one end of the provided Ethernet cable to your PC, and the other end to the ConnectPort
X4 Ethernet port (ensure that your PC is configured to obtain its IP address via DHCP).
2. Open the web interface of the ConnectPort X4 by navigating to the 192.168.1.1 address in a web
browser on the PC. You will see a screen similar to the following (this is the device’s Home page):
© 2014 DigiInternationalInc. 13
ConnectPortX4GettingStarted Guide
Configuring the ConnectPort X4 Cellular Interface
Configuring the ConnectPort X4 cellular interfaces will vary depending on whether the ConnectPort X4
supports the GSM/Edge or CDMA cellular network.
This section provides examples of how to configure the ConnectPort X4 cellular interface for three of the
popular cellular networks: AT&T, Verizon, and Sprint.
After following the example for your specific cellular provider (for Verizon users see page 15 , for Sprint
users see page 18), go to the “Verifying the ConnectPort X4 Cellular Connection Status” section on
page .21
GSM/Edge Cellular Configuration Example (AT&T)
To configure a GSM/Edge ConnectPort X4 cellular interface perform the following steps:
1. Click on Configuration > Mobile from the left-hand menu.
2. The ConnectPort X4 has two SIM slots with Slot 1 being the primary SIM slot. If you wish to use
SIM Slot 2, use the SIM drop-down box to select “Slot 2”, and then click Set as Primary.


Produktspezifikationen

Marke: Digi
Kategorie: Nicht kategorisiert
Modell: X4-Z11-E-A

Brauchst du Hilfe?

Wenn Sie Hilfe mit Digi X4-Z11-E-A benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Digi

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-