Denver DBO-6530 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Denver DBO-6530 (10 Seiten) in der Kategorie Selbstbalancierender Roller. Dieser Bedienungsanleitung war fĂĽr 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/10
Original Instruction
DENVER DBO-6530
www.facebook.com/denver-electronics
Before operating this vehicle, read all the instructions for safe assembly and operations. User’s manual can
guide you through the functions and usage of Balance scooter. Before using this scooter, familiarize yourself
with how to operate, so that you can keep the scooter in the best condition possible.
R
ELECTRONICS
Chapter 1 General information
1.1. The risk of driving
- Learn how to drive safely before you drive fast on the scooter.
- Failing, losing control, crashing, including violating the rules in the user’s manual can lead to injury.
- Speed and range may differ based on rider weight, terrain, temperature, and driving style.
- Make sure to wear helmet and protective clothing before using the scooter.
- Make sure to read the manual carefully before using the scooter.
- Only for use in dry weather.
- We do not recommend the use of any balanc er publ roae scoot s on ic ds
- Please make sure to check with your national laws in your country for usage this product.
1.2. The preparation before operation
Before using, the battery should be fully charged. Please check Chapter 6.
1.3. The weight limitation of the operator
The reason of the weight limitation: 1. guarantee the safety of the operator; 2. decrease the damage of
overloading.
Maximum load: 60kg.
Chapter 2 Operating the Balance scooter
2.1. Description and identification
2.2. Calibration
If your scooter seems to pull to the left or right, you may need to recalibrate its sensors. Step as below:
Step 1: Shut down/level the scooter
Step 2: Press the power button for approximately 10 seconds until the light flashes and the Scooter
beeps continuously
Step 3: Shutdown scooter again.
Step 4: Turn it on normally, and it is now calibrated
WARNING!
Built in Self-Balance function, it is easy for driving.
ENG 1
Pedal
Tire
Decorative Light
Protective cap for chassis
DC PortPower On/Off
Indicator Fender
2.3. Operating principal
- Balancing scooter uses Dynamic equilibrium, using internal gyroscope and acceleration s sors. The en
status of the scooter is controlled by the center-of gravity. It is adjusted by motor, which is controlled by
the servo control system. When you lean forward, it will sense your actions to accelerate. When you
need to turn, slow it down and move your foot forwards or backwards then the center-of gravity of the
body moves left or right therefore the scooter can sense moving left or right.
- Balance scooter has inertial dynamic stabilization system, so it can keep anterior-posterior balance but
cannot guarantee the left and right. So when turning, the scooter needs to be operated slowing,
otherwise, you may be injured.
2.4. Learn how to use it
Step 1: Press the power button to turn on the scooter.
Step 2: Put the scooter on a flat ground and make sure all safety measures are taken. Put one foot on the
pad that will trigger the pedal switch to turn on the eration indicator, after the system enters the self-op
balancing mode, put the other foot on the pad.
Step 3: Take control of the scooters’ forwards or backwards, do remember the movement of your body
should not be abrupt.
If you are not in a balanc condition when you trigger the foot-switch, the buzzer will alarm, and the warning ed
LED will light. The system is not in a self-balanced condition. Without a balanced condition, you should not
operate the scooter. Then you need to calibrate the sensors, see point 2.2.
Step 4: Control the left and right direction of the scooter.
Step 5: Before you get off, make sure that the scooter is still in balanced condition and stopped, then step off
one foot, then the other foot.
Tilt right foot forward- Turn Left Tilt left foot forward- Turn Right
You should never turn violently when driving fast.
NOTE:
WARNING!
ENG 2


Produktspezifikationen

Marke: Denver
Kategorie: Selbstbalancierender Roller
Modell: DBO-6530
Eingebaute Lautsprecher: Nein
Akku-/Batteriekapazität: 2000 mAh
Breite: 610 mm
Tiefe: 180 mm
Gewicht: 9150 g
Ladegerät: Ja
Produkttyp: Selbstbalancierender Roller
Produktfarbe: Schwarz
Akku-/Batterietechnologie: Lithium
Höhe: 190 mm
Maximales Lastgewicht: 60 kg
Verpackungsbreite: 630 mm
Verpackungstiefe: 240 mm
Verpackungshöhe: 232 mm
Netzteil Eingansgsspannung: 230 V
Verpackungsart: Box
Gehäusematerial: Aluminium, Plastic
Akku-/Batteriespannung: 36 V
Motorleistung: 250 W
Autonomie (max.): 8 km
Ladezeit: 4 h
Maximum Geschwindigkeit: 15 km/h
Maximale Steigung: - °
Empfohlenes Alter in Jahren (mind.): - Jahr(e)
Anzahl der Motoren: 2
Radmaterial: Gummi
Radgröße: 165 mm
Frontlicht: Ja
Frontlichttyp: LED
Felgenmaterial: Aluminium
Alarm bei niedrigem Batteriestand: Ja

Brauchst du Hilfe?

Wenn Sie Hilfe mit Denver DBO-6530 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Selbstbalancierender Roller Denver

Bedienungsanleitung Selbstbalancierender Roller

Neueste Bedienungsanleitung fĂĽr -Kategorien-