Denver BTN-210 Bedienungsanleitung

Denver Headset BTN-210

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Denver BTN-210 (4 Seiten) in der Kategorie Headset. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
Safety information
Please read the safety instructions carefully before using the product for the first time
and keep the instructions for future reference.
1. This product is not a toy. Keep it out of reach of children.
2. Warning: This product includes lithium polymer batteries.
3. Keep product out of the reach of children and pets to avoid chewing and swallowing.
4. Product operating and storage temperature is from 0 degree Celsius to 40 degree
Celsius. Under and over this temperature might affect the function.
5. Never open the product. Touching the inside electrics can cause electric shock. Repairs
or service should only be performed by qualified personnel.
6. Do not expose to heat, water, moisture, direct sunlight!
7. Please remove the earphones in case of any leakage or excessive heat from the product
to avoid burns or rash.
8. Please protect your ears against loud volume. Loud volume can damage your ears and
risk in hearing loss.
9. Bluetooth wireless technology operates within a range of about 10 m (30 feet). The
maximum communication distance may vary depending on the presence of obstacles
(people, metal objects, walls, etc.) or the electromagnetic environment.
10. Microwaves emitting from a Bluetooth device may affect the operation of electronic
medical devices.
11. The unit is not waterproof. If water or foreign objects enter the unit, it may result in fire
or electric shock. If water or a foreign object enters the unit, stop use immediately.
Charge It
• On the right earcup,carefuIIy plug the Type-C cable into Type-C charging port. and
connect the other end of the cable to either a computer USB port or to a USB-compatible
car or wall charger.
• Solid red LED light will appear to indicate when the headphone is charging.
• When charging is complete, the LED light will turn Blue.
• Charging time is approximately 2 hours.
Turn It On/Off
• Press & hold the power button on the right side of the headphone for about 3 seconds
until the LED indicator light turns on.
• Press & hold the power button again for 4 seconds until the LED light turns off.
Pair & Connect With New Device
ENG 1
• Power on the wireless bluetooth headphone(refer to the "Turn It On" section).
• To pair the headphone with a new device,the Red and blue LED light blink to indicate it
isready to be paired with your device.
NOTE:If the headphone is not used within 5 minutes.the headphones will automatically
turn off to save battery.
Play
Touch Function
• Press + area(refer to product Diagram) to nex track.
• Press - area(refer to product Diagram) to previous track.
• Press & Hold + area(refer to product Diagram) to turn up the volume.
• Press & Hold - area(refer to product Diagram) to turn down the volume.
• Press ANC buton once then the White LED light on means ANC function turn on.
ENG 2
Troubleshooting
• No power
- Recharge your wireless bluetooth headphone using the Type-C cable.
• Music is not playing over Bluetooth
- Make sure your Bluetooth device has A2DP profile. Check if both devices are paired and
connected over Bluetooth.Restart the headphone to reconnect your Bluetooth device.
• Bluetooth device will not reconnect with the headphone
- Navigate to your Bluetooth settings menu on your Bluetooth device,tap “DENVER
BTN-210” , and select "Forget" .
- Now follow the steps to pair your device again.Or, press & hold the power button on the
headphone (while powered on) to disconnect the headphones from any connected
devices. hen follow the steps to reconnect your device.
• For safety reasons,please do not charge the headphones while using them.
• Connect your device to the headphone via Bluetooth(refer to the” Pair & Connect" section)
• Open your favorite music app and press play.
• Control the music,track & volume from your device,or control the music & volume.Press the
Power button once to play/pause music & answer caIIs,press it twice to redial the last
number called on your phone,and press & hold it to reject an incoming call.
• All audio,incIuding music,games,videos,and notifications will be routed through the
headphone.
• On your Bluetooth-enabled smartphone,tabIet or media player,navigate to the Bluetooth
settings menu,turn on the Bluetooth feature,and search for new devices After a few
seconds you will see “DENVER BTN-210” listed.
• Tap this modei to select it.Solid blue LED light indicate your device has successfully paired.
• With your previously paired device’s Bluetooth turned on and in range,The headphone will
automatically reconnect to the last Bluetooth device it was connected to.
ENG 3
Product Diagram
Warning!
• Lithium battery inside!
• Do not try to open the product!
• Do not expose to heat, water, moisture or direct sunlight!
• Only charge with the original cable supplied with this product!
press & Hold (3 Sec):Power On
Press & Hold (4 Sec):Power Off
Play/Pause,Answer/End Calls
Double Click: Re-dial Last Dialed Phone Number
Press & Hold (1-2 Sec):Reject Incoming Call
Next Track / Volume Up Previous Track /
Volume Down
Type-C Charging Port
Microphone
3.5mm jacker
LED indicator
ANC Button


Produktspezifikationen

Marke: Denver
Kategorie: Headset
Modell: BTN-210

Brauchst du Hilfe?

Wenn Sie Hilfe mit Denver BTN-210 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Headset Denver

Bedienungsanleitung Headset

Neueste Bedienungsanleitung für -Kategorien-