Daniel Steiger Illumination Bedienungsanleitung

Daniel Steiger betrachten Illumination

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Daniel Steiger Illumination (1 Seiten) in der Kategorie betrachten. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
Illumination Watch
How to use the watch display:
Press any of the four buttons once, to see the time. Press
button A twice, to display the date. Press button C twice, to
display the day of the week (note that this is worked out
automatically by the watch itself, based on the date & year you
select). Press button D twice, to display the current alarm set
time.
How to set the digital time, date, & day:
First of all, push any button to bring up the time LEDs. Then,
hold down button B until the seconds start to flash. Push button
B again, once, & you will see the hour digits flashing. To
change the hour, push button C until the desired hour is
reached. Once the hour has been set, if you push button B
again, each push will - in this order - take you through the
minutes, the year, the month, the date, and the 24 hour/AM-PM
time display option. In each case, you can change any of these
by pushing button C.
How to operate/set the alarm:
To turn the alarm on/off, push button D once, and then push it
again, but hold the button in until you see the LED digits on the
face flashing, & saying AL OFF, or AL ON. Push button C to
switch between on, and off. While the LEDs are still flashing,
push button D again, and you will see the time the alarm is set
for, again flashing. Use button C to change the hour to the
desired time, then push button D once, and again use button C
to adjust the minutes to the desired time. Once the alarm time
is set, it can just be left; no further button pushes are needed.
Note that when ALM is illuminated, that means you are in the
alarm setting mode. When it is not, you are not in the alarm
setting mode. When ALE is illuminated, that means the alarm is
on. When it is not, the alarm is off.
Warranty:
This warranty service run by: Timepieces International
Inc, 12800 NW South River Drive, Medley, FL, 33178,
with the authorization of Daniel Steiger. This warranty
covers the watch movement against manufacturer’s
defects for 5 years from date of purchase.
Within the period your watch will be repaired free of
charge, except for a handling and transportation fee
($29.95). This fee must be enclosed when returning your
watch for service. We cannot accept responsibility for
damage or loss caused in transit.
Important: Not covered by warranty
1.) Case, glass and band
2.) Damage caused through accidents, misuse, neglect,
or inexpert repairs
3.) Any discoloration, or wear
4.) Any loss or damage whilst the watch is not in our
possession, including transit by any means
5.) Any consequential loss whatsoever and how so ever
arising, so be accepted by us
6.) Batteries
Crown
Button D
Button C
Button B
Button A


Produktspezifikationen

Marke: Daniel Steiger
Kategorie: betrachten
Modell: Illumination

Brauchst du Hilfe?

Wenn Sie Hilfe mit Daniel Steiger Illumination benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung betrachten Daniel Steiger

Bedienungsanleitung betrachten

Neueste Bedienungsanleitung für -Kategorien-