Danby DDW1802 Bedienungsanleitung


Lesen Sie kostenlos die šŸ“– deutsche Bedienungsanleitung fĆ¼r Danby DDW1802 (41 Seiten) in der Kategorie SpĆ¼lmaschine. Dieser Bedienungsanleitung war fĆ¼r 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/41
OWNERā€™S USE AND CARE GUIDE
GUIDE Dā€™UTILISATION ET D'ENTRETIEN
MODEL ā€¢ MODƈLE
DANBY PRODUCTS LIMITED, ONTARIO, CANADA N1H 6Z9
DANBY PRODUCTS INC., FINDLAY, OHIO, USA 45840
DDW1801MW / DDW1802EBLS
Dishwasher Installation
Instructions
Instructions dā€™installation
lave-vaisselle
2016.02.25
CONTENTS
TABLE DES MATIƈRES
BUILT IN DISHWASHER
Installation Instructions ...............................................1-19
ā€¢ Dishwasher Safety
ā€¢ Installation Requirements
ā€¢ Installation instructions
LAVE-VAISSELLE ENCASTRƉ
Instructions dā€™installation...........................................20-38
ā€¢ SĆ©curitĆ© de lave-vaisselle
ā€¢ Exigences dā€™installation
ā€¢ Instructions dā€™installation
CAUTION:
Read and follow all safety rules and operating
instructions before ļ¬ rst use of this product.
PRƉCAUTION :
Veuillez lire attentivement les consignes de
sĆ©curitĆ© et les instructions dā€™utilisation avant
lā€™utilisation initiale de ce produit.
WARNING:
Tip Over Hazard
ā€¢ Do not use dishwasher until completely installed.
ā€¢ Do not push down on open door.
ā€¢ Doing so can result in serious injury or cuts.
DISHWASHER SAFETY
Safety Tips:
ā€¢ Slowly open dishwasher door while someone grasps the rear of the dishwasher. Remove shipping materials, drain
hose and lower rack. Close dishwasher door until latched.
ā€¢ Observe all governing codes and ordinances.
ā€¢ Install this dishwasher as speciļ¬ ed in these instructions.
ā€¢ Installation should be performed by a qualiļ¬ ed service technician. The dishwasher must be installed to meet all electri-
cal and plumbing national and local codes and ordinances.
INSTALLATION REQUIREMENTS
Tools and Parts:
Gather the required tools and parts before starting installation.
Tools Needed for All Installations Parts Needed for All Installations
ā€¢ Phillips screwdriver ā€¢ 90Ā° elbow with 3/8ā€ N.P.T. external threads on one
end. (The other end must ļ¬ t your water supply line).
ā€¢ Flat - blade screwdriver ā€¢ Thread seal tape
ā€¢ 5/16" and 1/4" nut drivers ā€¢ 3 UL listed wire nuts
ā€¢ Measuring tape or ruler ā€¢ One 1-1/2ā€-2ā€ screw type clamp
ā€¢ 6" adjustable wrench
ā€¢ Small level Parts Needed for New Installations
ā€¢ Flashlight ā€¢ Copper tubing (3/8ā€ recommended)
ā€¢ Shallow pan ā€¢ Clamp connector to ļ¬ t a 7/8ā€ (22.2 cm) diameter hole
ā€¢ One 1-1/2ā€ -2ā€ screw type clamp if connecting to
waste-tee
Tools Needed for New Installations
ā€¢ Electric drill with 1/2ā€, 3/4ā€ and 1-1/2ā€ hole saw bits
ā€¢ Small tube cutter
Parts Supplied:
A. 2 ā€“ # 8 x 5/8ā€ Phillips ļ¬‚ at head wood screws
B. 4 ā€“ Phillips head, color matched toekick screws
Make sure these parts are included.
See separate parts list for accessories available for your dishwasher. AB
1


Produktspezifikationen

Marke: Danby
Kategorie: SpĆ¼lmaschine
Modell: DDW1802

Brauchst du Hilfe?

Wenn Sie Hilfe mit Danby DDW1802 benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung SpĆ¼lmaschine Danby

Bedienungsanleitung SpĆ¼lmaschine

Neueste Bedienungsanleitung fĆ¼r -Kategorien-