Dali Evidence Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Dali Evidence (8 Seiten) in der Kategorie Speakers. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/8
OWNERS MANUAL
THANK YOU FOR
CHOOSING DALI
We know you cant wait to hear your new DALI loudspeakers, so well save the more
technical stuff until later. That way, youll have something to read once your system is up
and running.
But first, unless you are experienced and confident in hi-fi matters, please take the time to
read at least the sections on CONNECTIONS and PLACEMENT, before wiring your new
DALI loudspeakers to your system.
It is the goal of this manual to assist you in obtaining the finest possible performance from
your new DALI loudspeakers. If additional assistance is required, always feel free to contact
your authorised DALI dealer.
STEREO AND SURROUND
CONNECTION
The loudspeaker carton indicates whether the
speaker inside is Left or Right or Centre. Position
them correctly.
Always turn your amplifier off before connecting
or disconnecting any cables. Always use equal
lengths of cable for the left and right speakers.
Cable should be connected between loudspeaker
and amplifier, red plus (+) terminal to red plus (+)
terminal and black minus (-) terminal to black mi-
nus (-) terminal. It is important that the connections
are made correctly and in phase. Incorrect, out-
of-phase connection will result in a diffuse stereo
image and weak bass.
Your DALI Evidence loudspeakers have two pairs
of terminals. If you do not choose to use bi-wiring
or bi-amping, make sure that the enclosed metal
straps are in place and tightened by hand, one
connecting red terminal to red terminal, the other
connecting black terminal to black terminal. For
normal use, connect only one terminal pair to the
amp as shown in (Fig. 1).
In a surround system, connect centre, front and
rear surround loudspeakers to the surround amp
as shown in (Fig. 2).
Fig. 1. Normal Stereo Connection
Fig. 2. Surround Connection
2
BI-WIRING AND BI-AMPING
We recommend bi-wiring or bi-amping for
improved sound quality.
To bi-wire or bi-amp, remove the metal straps
before going on to the next steps. The top termi-
nal pair on each speaker connects to the high
frequency crossover section and the bottom ter-
minal pair connects directly to the low frequency
crossover section.
To bi-wire (fig. 3), connect cable from one pair of
terminals on each speaker to the amplifiers out-
put terminals. Then, connect another cable from
the second pair of speaker terminals to the SAME
terminals on the amplifier.
To bi-amp (fig. 4), two identical stereo amplifiers
should be used. Connect cable from the bass
terminals of the left speaker to the left channel of
one of the amplifiers. Connect cable from the
bass terminals of the right speaker to the right
channel of the same amplifier.
Connect cable from the high frequency terminals
of the left speaker to the left channel of the second
amplifier. Then, connect cable from the high
frequency terminals of the right speaker to the
right channel of the second amplifier.
Bi-wiring offers improvements in the areas of
openness and reduces intermodulation distort-
ion. Bi-amping offers further improvements in
these areas with the added benefit of increased
dynamics.
Tighten all connections securely so that the cable
cannot slip out. Make certain that no loose
strands of wire are sticking out. Wire connected
to a terminal must never touch wire connected
to any other terminal.
3
Cable quality and design do make a difference. Buy the best cable you can reasonably
afford. In this simple way, you can raise the performance of your system to a higher level.
Produktspezifikationen
Marke: | Dali |
Kategorie: | Speakers |
Modell: | Evidence |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Dali Evidence benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Speakers Dali
5 Oktober 2024
22 September 2024
21 September 2024
21 September 2024
22 August 2024
14 August 2024
7 August 2024
4 August 2024
3 August 2024
2 August 2024
Bedienungsanleitung Speakers
- Speakers Labtec
- Speakers Yamaha
- Speakers Dymond
- Speakers Technaxx
- Speakers Grundig
- Speakers Ideen Welt
- Speakers Auna
- Speakers Beats
- Speakers Bose
- Speakers Lenco
- Speakers Pioneer
- Speakers JBL
- Speakers Onkyo
- Speakers PEAQ
- Speakers Teufel
- Speakers Reflexion
- Speakers Novero
- Speakers Harman Kardon
- Speakers Magnat
- Speakers Power Dynamics
- Speakers Skytec
- Speakers BML
- Speakers Ebode
- Speakers Jamo
- Speakers Albrecht
- Speakers Altec Lansing
- Speakers ION
- Speakers Amazon
- Speakers Phonocar
- Speakers Deluxa
- Speakers IHome
- Speakers Iluv
- Speakers Jam
- Speakers Konig Electronic
- Speakers Maxell
- Speakers Pure Acoustics
- Speakers Quadral
- Speakers REL Acoustics
- Speakers Stereoboomm
- Speakers Veho
- Speakers XtremeMac
- Speakers Advance Acoustic
- Speakers Beoplay
Neueste Bedienungsanleitung für -Kategorien-
5 Oktober 2024
5 Oktober 2024
23 September 2024
16 September 2024
27 August 2024
27 August 2024
27 August 2024
26 August 2024
26 August 2024
26 August 2024