Da-Lite IDEA Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Da-Lite IDEA (7 Seiten) in der Kategorie Projektionsfläche. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/7
INSTRUCTION BOOK FOR
IDEA™ Screen
2
Preparation
Note: It requires two people to assemble an IDEA Screen. To
maintain optimal projected image geometry and screen
alignment, a lat and straight wall free from obstructions and
angular distortions should be used.
Tools Required For Assembly
Phillips Screwdriver Level
Rubber Mallet Measuring Tape
Choose a clean work area for assembly using padded material or
other soft, clean materials. The work area should be larger than
the overall screen size and directly in front of the location where
the screen is to be installed.
Hardware Provided
(7) #8 x ½” Screws
44 Wall Bracket
(2) 89”, 94¼”, 95¼” and 106” Wide Screens
28 Wall Bracket
(2) 57½”, 64”, 73½”, 80”, 81¾” and 84¾” Wide Screens
(2) LBrackets
3
Assembly Instructions for Screens with 24” Marker Tray
1. Carefully unpack unit and place assembly on top of the clean
work area. The viewing surface must face up.
2. Center aluminum tray to the bottom of frame and attach with (3)
of the provided #8 x ½” screws. Insert screws through the tray into
the groove (Figure 1).
#8 X ½" Screws
Figure 1


Produktspezifikationen

Marke: Da-Lite
Kategorie: Projektionsfläche
Modell: IDEA

Brauchst du Hilfe?

Wenn Sie Hilfe mit Da-Lite IDEA benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Projektionsfläche Da-Lite

Bedienungsanleitung Projektionsfläche

Neueste Bedienungsanleitung für -Kategorien-