D-Link DWL-6610APE Bedienungsanleitung

D-Link Zugangspunkt DWL-6610APE

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für D-Link DWL-6610APE (22 Seiten) in der Kategorie Zugangspunkt. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/22
Documentation is also available
on the D-Link website
This document will guide you through the
basic installation process for your new
D-Link Unied Wireless Access Point.
DWL-6610APE
Quick Installation Guide
Unied AC Concurrent Dual-Band
PoE Access Point
2 D-Link DWL-6610APE Quick Install Guide
About This Guide
This installation guide provides basic
instructions for installing the DWL-6610APE
Unied AC Concurrent Dual-band PoE Access
Point on your network. For additional information
about how to use the Access Point, please see
the User Manual, which is available on the CD
included in this package or from the D-Link
support website.
POWERWhen the LED is lit up, the
access point is powered and
ready for use.
LANWhen this LED is lit up, the
device’s Ethernet port is
connected to an active router or
switch. The light will blink when
there is trafc going through the
port.
2.4GHz/5GHz When the LED is lit up, the
access point’s radio is enabled.
It will blink when there is wireless
trafc.
Unpacking the Product
System Requirements
Open the shipping carton and carefully unpack its
contents. Please consult the packing list located
in following information to make sure all items are
present and undamaged. If any item is missing
or damaged, please contact your local D-Link
reseller for replacement.
- DWL-6610APE Unied AC Concurrent
Dual-band PoE Access Point
- Power adapter*
- 4 dual-band antennas
- Mounting ring
- Console cable*
- CD-ROM
- Ceiling bracket (3 sets, sizes are 9/16", 14/16",
and 1 1/2")
*The power adapter is an optional accessory and not
included in the package in some regions. To power
the units use a D-Link PoE switch or the D-Link
DPE-101GI PoE injector.
*The console cable is an optional accessory and
not included in the package in Armenia, Azerbaijan,
Belarus, Georgia, Israel, Kaliningrad, Kazakhstan,
Kyrgyzstan, Latvia, Lithuania, Moldova, Mongolia,
Russia, Turkey, Turkmenistan, Ukraine, and
Uzbekistan. If a cable is required, please contact your
reseller to order it (Model: ACS-AP-CONSOLE).
- CD-ROM drive
- Windows®, Macintosh®, or Linux-based operating
system
- Ethernet port or installed Ethernet adapter
- Internet Explorer 7.0, Safari 5.0, Firefox 4.0, or
higher
Optional Accessories
- PoE base unit (Model: DPE-101GI)
Note: These accessories are not included in
the package. If any of these items are required,
please contact your reseller to order it.
Figure 2. DWL-6610APE Rear Panel
Hardware Overview
Power receptor
LAN port (PoE)
Console port
LEDs
Interfaces
Figure 1. DWL-6610APE LEDs
D-Link DWL-6610APE Quick Install Guide 3
Power on the Access Point
To power on the DWL-6610APE, you can use
ONE of the following methods:
1. Connect the supplied power adapter
OR
2. Plug one end of an Ethernet cable into the LAN
port of the DWL-6610APE and the other end into
a port on a PoE switch.
Congure the Access Point
To set up and manage the DWL-6610APE, use
one of the following methods:
Manage the access point from the computer:
connect the access point and your computer
directly via a straight-through Ethernet cable.
Mounting Options
You can mount a DWL-6610APE access point on
any of the following types of surfaces:
- Solid surface wall or ceiling
- Tabletop
Cable Requirement
Use a CAT 5 cable with an even sheath.
The Ethernet ports on the DWL-6610APE access
point cannot accept a CAT 5 cable that has an
uneven sheath; the RJ-45 connector on the cable
will not t properly into the receptacle on the
access point.
Wall Installation Recommendations
If you plan to install the DWL-6610APE on a wall
or other vertical surfaces, orient the top of the
access point (the side with the LEDs) toward
the intended coverage area. The radio antennas
transmit through the top of the access point but
not through the bottom (where the bracket is).
Warning: The DWL-6610APE is designed
to receive PoE power only from an
802.3af-compliant source, or from a D-Link-
approved power injector. Connecting an access
point to a Power over Ethernet (PoE) device
that is not approved by D-Link can damage the
equipment.
Manage the access point from the computer
via the switch or router: connect the access
point and your computer to the same switch
or router.
Reset button
Installation
Manage the access point from the computer
via the Unied Wireless Switch or Wireless
Controller: connect the access point to
a Unied Wireless Switch or Wireless
Controller. Connect your computer to the
same network as that of the Unied Wireless
Switch or Wireless Controller.
Power button
(for power adapter)
ComputerDWL-6610APE
Switch or Router ComputerDWL-6610APE
Unied Wireless Switch
or
Wireless Controller ComputerDWL-6610APE
2.4GHz SMA
Connector
5GHz SMA
Connector
2.4GHz SMA
Connector
5GHz SMA
Connector


Produktspezifikationen

Marke: D-Link
Kategorie: Zugangspunkt
Modell: DWL-6610APE

Brauchst du Hilfe?

Wenn Sie Hilfe mit D-Link DWL-6610APE benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Zugangspunkt D-Link

Bedienungsanleitung Zugangspunkt

Neueste Bedienungsanleitung für -Kategorien-