D-Link DPE-301GS Bedienungsanleitung

D-Link Splitter DPE-301GS

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für D-Link DPE-301GS (3 Seiten) in der Kategorie Splitter. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/3
Gigabit PoE+ Splitter
DPE-301GS
The DPE-301GS Gigabit PoE+ Splitter provides Gigabit connectivity and high wattage
electrical power to legacy devices that do not support PoE, by separating power and data
from a PoE source. Compliant with the 802.3at and 802.3af PoE standards, it can eectively
turns any device into a PoE device, giving you the ability to mount your non-PoE device
virtually anywhere in a building since it doesn’t require a power outlet.
Power a Wider Range of Devices
Remotely connect and power a wide variety of power demanding devices with the
DPE-301GS. The DPE-301GS outputs up to 5VDC, 9VDC, or 12VDC, making it better able
to cope with the demands of multi-feature surveillance cameras, 802.11ac wireless access
point, network switches and security equipment.
Greater Deployment Flexibility
Network administrators can use the DPE-301GS to deploy wireless access points and
network cameras in hard-to-reach places such as entryways, rooftops, ceilings or any
other location not in close proximity to a power outlet. This means that administrators can
position network devices where they will be most eective, rather than having to settle for
less desirable locations due to the limited availability of power. Avoiding the need to use
unsightly extension cables, or the hassle and expense of installing new electrical wiring.
Reliable Connectivity
With built-in overcurrent protection and high eciency DC-DC converter, the DPE-301GS
oers output short-circuit protection to avoid damaging the connected device.
Features
Simplicity
Plug-and-Play, so no software required
Reduces installation and network equipment
costs by removing the need for electrical wiring
Provides power over existing network cabling
when paired with a Power Source Equipment
(such as the DPE-301GI) to a non-PoE device
Flexible Power Options
Separates a PoE Ethernet cable into DC power
and a standard Ethernet cable
Supports 5 V, 9 V, and 12 V output voltages
Transforms incoming AC power to low-voltage
DC power
Gigabit Connectivity
Receives power up to 100 metres away1
Connect your devices at Gigabit speeds
Auto-negotiation on Ethernet port
Reliability
IEEE 802.3at (PoE+) and IEEE 802.3af (PoE)
compliant
Compatible with all standard PoE devices and
restricts power input to avoid damaging Power
Sourcing Equipment (PSE)
Overcurrent protection
More Power with PoE+
Bring the benets of more powerful IEEE 802.3at
PoE+ to non-PoE devices with this compact and cost-
eective PoE solution
Flexible Deployment
Install non-PoE devices in locations where there are
no outlets without using extension cords or installing
electrical infrastructure
Easy to Setup
Install devices easily by simply setting the correct
output voltage (5 V, 9 V, or 12 V) and plugging in
Ethernet cables; no additional software is required
Product Highlights
DPE-301GS Gigabit PoE+ Splitter
Setup Example - Powered by PoE Switch
DPE-301GS
Splitter or
or
or
or
PoE Switch
Power & Ethernet
using PoE
Power & Ethernet
using PoE
Ethernet
Ethernet
5V/9V/12V DC Power Out
5V/9V/12V DC Power Out
Workstation
DPE-301GI
PoE Injector
Workstation
Router
Ethernet
Setup Example - Powered by PoE Injector2
Power In
Power
Power over Ethernet
Ethernet
DPE-301GS
Splitter
Other Non-PoE Network Device
Other Non-PoE Network Device
Non-PoE Camera
Non-PoE Camera
Non-PoE Access Point
Non-PoE Access Point
54 V DC Power
Adapter
DPE-301GS Gigabit PoE+ Splitter
D-Link European Headquarters. D-Link (Europe) Ltd., D-Link House, Abbey Road, Park Royal, London, NW10 7BX.
Specications are subject to change without notice. D-Link is a registered trademark of D-Link Corporation and its overseas subsidiaries.
All other trademarks belong to their respective owners. ©2016 D-Link Corporation. All rights reserved. E&OE.
Updated May 2016
For more information: www.dlink.com
Technical Specications
Ports
PoE In Supports half/full-duplex operation
10/100/1000BASE-T port
IEEE 802.3 compliant
IEEE 802.3u compliant
IEEE 802.3ab compliant
IEEE 802.3at compliant
IEEE 802.3af compliant
LAN Out Supports half/full-duplex operation
10/100/1000BASE-T port
IEEE 802.3 compliant
IEEE 802.3u compliant
IEEE 802.3ab compliant
LED Indicator Green: Power On
Physical
Dimensions (L x W x H) 109.8 x 62.2 x 24.5 mm (4.32 x 2.45 x 0.96 inches)
Weight 98 grams (3.46 ounces)
Power Output 5V DC up to 2.5A
9V DC up to 2A
12V DC up to 2A
Included Power Adapter Cables 5.5 mm to 3.8 mm male to male 5.5 mm to 5.5 mm male to male
Temperature Operating: 0 to 60 °C (32 to 140 °F) Storage: -30 to 70 °C (-22 to 158 °F)
Humidity Operating: 5% to 95% non-condensing Storage: 5% to 95% non-condensing
Certifications CE
FCC
VCCI
RCM
RoHS
1 Maximum distance as per 802.3u specications
2 DPE-301GI (PoE Injector) sold separately
Note: If the DPE-301GS is connected to outdoor devices, it is recommended to install a surge protector.


Produktspezifikationen

Marke: D-Link
Kategorie: Splitter
Modell: DPE-301GS

Brauchst du Hilfe?

Wenn Sie Hilfe mit D-Link DPE-301GS benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Splitter D-Link

Bedienungsanleitung Splitter

Neueste Bedienungsanleitung für -Kategorien-