D-Link DKT-410 Bedienungsanleitung

D-Link Router DKT-410

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für D-Link DKT-410 (36 Seiten) in der Kategorie Router. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/36

Quick Install Guide+

Installationsanleitung+

Guide d’installation+

Guía de instalación+

Guida di Installazione+

Installatiehandleiding+

Instrukcja instalacji+

Instalační příručka+

Telepítési Segédlet+

Installasjonsveiledning+

Installationsvejledning+

Asennusopas+

Installationsguide+

Guia de Instalação+

Οδηγός Γρήγορης Εγκατάστασης το+

WIRELESS N STARTER KIT

Note :

Using a power supply with a different

voltage rating will damage and void the

warranty of this product.

Quick Installation Guide

DKT-410

WIRELESS N STARTER

KIT

CD-ROM

(D-Link Click’n’Connect.

Manual and Warranty)

Ethernet (CAT5 UTP)

Cable

Power Adapter

If any of the items are missing, please contact your reseller.

Default IP: 192.168.0.1

Default Username: Admin

Default Password:

1Remove the D-Link Click and

Connect CD. 2A. Be sure your Internet connection is

active. DO NOT plug the router in yet.

B. Insert the D-Link Click’n Connect CD

into your computer.

Quick Installation

Package Contents

WIRELESS N STARTER KIT

Troubleshooting

1. How do I configure my DIR-615 router without the CD, or check my Wireless Network

Name (SSID) and Wireless Encryption Key?

• Connect your PC to the router using an Ethernet cable.

• Open a web browser and enter the address http://192.168.0.1

• The default username is ‘admin’. The default password is ‘’ (leave the field blank).

• If you have changed the password and can not remember it, you will need to reset the router

to set the password back to ‘’ (leave the field blank).

Click

2. How do I reset my DIR-615 router to factory default settings?

• Ensure the router is powered on.

• Press and hold the reset button on the rear of the device for 20 seconds.

Note: Resetting the router to factory default will erase the current configuration settings. To

re-configure your settings, log into the router as outlined in question 1, then run the

Setup Wizard.

3. How do I add a new wireless client or PC if I have forgotten my Wireless Network Name

(SSID) or Wireless Encryption Key?

• Every PC that needs to connect to the router wirelessly, you will need to ensure you use the

correct Wireless Network Name (SSID) and encryption key.

• Use the web based user interface (as described in question 1 above) to check or choose your

wireless settings.

• Make sure you take a note of the settings so that you can enter them into each wirelessly

connected PC. D-Link has provided a handy sticker for you to note them down and attach to

your router, or other location you find most convenient.

4. What can I do if my router is not working correctly?

• Check the LED’s on the front of the router. The Power, Wireless and Internet LED should be

on. One or more of the LAN LED should flash.

• Check that all the cables are firmly connected at both ends.

• Power the router off for 20 seconds, and then power it back on.

5. What can I do if I can’t get a Wireless Connection with my Laptop or PC?

• Try running the Wireless in the same room first with line of sight to the Router.

• Check all your Wireless cards are enabled on the Laptop and PCs you wish to use. If your

Laptop has built in Wireless please check it is enabled. As it may require a particular switch or

key-press to enable the wireless function.

6. Why can I not get an Internet Connection?

• For Cable users make sure Clone MAC address option is ticked during Wizard installation

(or enter the registered MAC) and make sure the service has been enabled/connected and is

operational.

• For ADSL users please contact your ISP to make sure the service has been enabled/connected

by your ISP and that your ISP username and password is correct.

Note: If you are unable to connect, see the Troubleshooting chapter of the product manual in

the D-Link DKT-410 Wireless N Starter CD.

Technical Support

Thank you for choosing D-Link products. For further information, support, product updates or to

download the User Manual please visit the D-Link website at www.dlink.eu.

http://www.dlink.co.uk

: 08456 12 0003

Produktspezifikationen

Marke:	D-Link
Kategorie:	Router
Modell:	DKT-410
Mobile Netzwerkverbindung:	Nein
WLAN-Standards:	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Breite:	193 mm
Tiefe:	117 mm
Gewicht:	904 g
AC-Netzadapter:	Ja
Produktfarbe:	Schwarz, Silber
Höhe:	30 mm
Energiequelle:	AC
Gleichstrom-Anschluss (DC):	Ja
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 90 %
Netzstandard:	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
Unterstützte Sicherheitsalgorithmen:	64-bit WEP, 128-bit WEP, WPA, WPA2
Eingebauter Ethernet-Anschluss:	Ja
Schnittstellentyp Ethernet-LAN:	Schnelles Ethernet
Zertifizierung:	FCC Class B, CE, C-Tick, IC
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	4
Ethernet LAN Datentransferraten:	10, 100 Mbit/s
Antenne Zunahmeniveau (max):	2 dBi
Anzahl der Antennen:	3
LED-Anzeigen:	Y, WAN, WLAN, USB, LAN
Temperaturbereich bei Lagerung:	-20 - 65 °C
Luftfeuchtigkeit bei Lagerung:	5 - 95 %
Energiebedarf:	5V DC
Rack-Einbau:	Nein
Frequenzbereich:	2412 - 2472 MHz
Frequenzband:	2.4 GHz
Anzahl der USB-Anschlüsse:	1
USB-Version:	2.0
Mobilfunknetzgenerierung:	4G
Web-basiertes Management:	Ja
Kompatible Betriebssysteme:	Windows 2000/XP/Vista\nMac OS 10.4 +
Abmessungen (BxTxH):	117 x 193 x 30 mm
Top WLAN-Standard:	Wi-Fi 4 (802.11n)
Filterung:	Ja
Eingangsstrom:	3 A
Ethernet-WAN:	Ja
Verkabelungstechnologie:	10/100Base-T(X)
VPN Unterstützung:	PPTP, L2TP, IPSec
3G:	Nein
4G:	Nein
Firewall:	Ja
MAC Adressen Filtern:	Ja
Zustandsorientierte Paketüberprüfung (SPI):	Ja
DHCP-Client:	Ja
DHCP-Server:	Ja
Antennen-Design:	Extern
Reset-Knopf:	Ja
Modulation:	CCK, DBPSK, DQPSK, OFDM
xDSL-Verbindung:	Nein
Bandbreite:	2.4 GHz
Bandbreite (erste):	2.4 GHz
URL-Filterung:	Ja
NEtzwerkadressenübersetzung (NAT):	Ja
Max. Datenübertragungsrate:	0.3 Gbit/s
Antenne Steckertyp:	RP-SMA