CZUR M3000 Pro Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für CZUR M3000 Pro (16 Seiten) in der Kategorie Scanner. Dieser Bedienungsanleitung war für 24 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/16
USER MANUAL (M3000 Pro)
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired
operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
The symbol indicates DC voltage.
RECYCLING: This product bears the selective sorting symbol for Waste electrical and electronic
equipment ( WEEE ). This means that this product must be handled pursuant to European directive
2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
1.1 Product Summary .........................................................................................1
1.2 Product Dimensions .......................................................................... ........2...
1.3 Installation Guide ..........................................................................................2
1.4 Product Appearance .....................................................................................3
1.5 Product Specifications ..................................................................................5
1.6 Packaging and Accessories ............................................................... .....6.....
2.1 Scanning Preparation ....................................................................... .........6...
2.2 Work Mode ...................................................................................................7
2.2.1 Computer Mode (USB-PC) ...................................................................7
2.2.2 Visual Presenter Mode (USB-PC) ............................................ .....9.......
3.1 PC Mode (USB) Problems ............................................................................9
4.1 After Sales Services and Guarantee ...........................................................11
4.2 Contact Information ........................................................................... ....12.....
Chapter I Introduction
Chapter II Operation Guidelines
Chapter III Frequently Asked Questions and Troubleshooting
Chapter IV Terms of Service
Contents
Produktspezifikationen
Marke: | CZUR |
Kategorie: | Scanner |
Modell: | M3000 Pro |
Bildschirmdiagonale: | 2.4 " |
RAM-Kapazität: | 1 GB |
USB Anschluss: | Ja |
Breite: | 520 mm |
Tiefe: | 505 mm |
Gewicht: | 4500 g |
Mitgelieferte Kabel: | USB |
Produktfarbe: | Schwarz |
Steuerung: | Buttons, Foot pedal |
Höhe: | 425 mm |
AC Eingangsfrequenz: | 50 - 60 Hz |
Eingebautes Display: | Ja |
Display: | LCD |
Menge pro Packung: | 1 Stück(e) |
Stromstärke: | 0.6 A |
Unterstützt Windows-Betriebssysteme: | Windows 10, Windows 7, Windows 8, Windows XP |
Unterstützte Bildformate: | JPG |
Unterstützt Mac-Betriebssysteme: | Mac OS X 10.11 El Capitan |
Netzteiltyp: | AC |
USB-Version: | 2.0 |
Megapixel (ca.): | 20 MP |
Größe des Bildsensors: | 1/2.3 " |
Ausgangsstrom: | 2 A |
Ausgangsspannung: | 9 V |
Prozessorbetriebsmodi: | 32-bit |
Eingangsspannung: | 100 - 240 V |
Alarm: | Ja |
Eingebauter Prozessor: | Ja |
ISO-A-Formate (A0...A9): | A3 |
Maximale Papiergröße der ISO A-Serie: | A3 |
Videoaufnahme: | Ja |
Prozessor Architektur: | MIPS |
Sensor-Typ: | CMOS |
Sichtfeld: | 82 ° |
Optische Scan-Auflösung: | - DPI |
Scanner-Typ: | Overhead-Scanner |
Duplex-Scan: | Nein |
Digitales Wasserzeichen: | Ja |
Paginierung Funktion: | Ja |
Feste Brennweite: | 4.7 mm |
Ausgabe Farbtiefe: | 24 Bit |
Maximale Scan-Abmessung: | 297 x 420 mm |
Tägliche Einschaltdauer (max): | - Seiten |
Scanner-Dateiformate: | PDF, DOCX, JPG, XLS |
Lichtquelle: | LED |
Fester Fokus: | Ja |
Tastenfunktionen: | Scannen |
Anzahl der Laserpunkte: | 3 |
Hintergrundfarbe wählbar: | Ja |
Verzeichnung: | 0.3 % |
Display-Auflösung: | 320 x 240 Pixel |
OCR integriert: | Ja |
Anzahl der unterstützten OCR-Sprachen: | 180 |
Funktionen der intelligenten Scanner-Software: | Auto-scanning, Blank page detection, Combined sides scanning |
Trimming: | Ja |
Bildschirm-Aufzeichnung: | Ja |
Laserstrahlen: | Ja |
Bücherwiege: | Ja |
Büchereinband-Block: | Ja |
Hintere Brennweite (BFL): | 6.18 mm |
IR Cut Filter: | 650 nm |
Brauchst du Hilfe?
Wenn Sie Hilfe mit CZUR M3000 Pro benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Scanner CZUR
25 August 2024
25 August 2024
25 August 2024
21 Mai 2024
30 März 2024
8 August 2023
Bedienungsanleitung Scanner
- Scanner Genius
- Scanner Hama
- Scanner HP
- Scanner Kensington
- Scanner Medion
- Scanner Nedis
- Scanner SilverCrest
- Scanner Tevion
- Scanner Trust
- Scanner Panasonic
- Scanner Tchibo
- Scanner Canon
- Scanner Maginon
- Scanner Technaxx
- Scanner König
- Scanner Renkforce
- Scanner Braun
- Scanner Lenco
- Scanner Jay-Tech
- Scanner Epson
- Scanner Brother
- Scanner Sagem
- Scanner Nikon
- Scanner Ricoh
- Scanner Globaltronics
- Scanner AVerMedia
- Scanner Dymo
- Scanner Kodak
- Scanner Agfa
- Scanner Easypix
- Scanner Konica-Minolta
- Scanner Minolta
- Scanner Rollei
- Scanner Traveler
- Scanner Eurolite
- Scanner Fujitsu
- Scanner Albrecht
- Scanner Uniden
- Scanner Kogan
- Scanner Elmo
- Scanner IPEVO
- Scanner Jobo
- Scanner Lexmark
- Scanner Xerox
- Scanner Cobra
- Scanner ION
- Scanner DNT
- Scanner Reflecta
- Scanner Plustek
- Scanner RadioShack
- Scanner Blackmagic Design
- Scanner Avision
- Scanner Dyka
- Scanner ICarsoft
- Scanner IRIS
- Scanner Kenko
- Scanner Martin
- Scanner Mustek
- Scanner Rittz
- Scanner Steren
- Scanner Veho
- Scanner Yupiteru
- Scanner Zolid
- Scanner Antec
- Scanner AgfaPhoto
- Scanner Panduit
- Scanner Newland
- Scanner Vupoint Solutions
- Scanner Ambir
- Scanner Microtek
- Scanner Pacific Image
- Scanner Scan Dimension
- Scanner CDVI
- Scanner Soundsation
- Scanner Perfect Choice
- Scanner Cartrend
- Scanner Visioneer
- Scanner DENSO
- Scanner 3DMAKERPRO
- Scanner Neat
- Scanner DTRONIC
- Scanner Ross-Tech
- Scanner Matter And Form
- Scanner Doxie
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
11 Oktober 2024
11 Oktober 2024
6 Oktober 2024
26 September 2024
26 September 2024
24 September 2024
23 September 2024
22 September 2024
20 September 2024