CyberPower PDU20SWHVIEC10ATNET Bedienungsanleitung

CyberPower Nicht kategorisiert PDU20SWHVIEC10ATNET

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr CyberPower PDU20SWHVIEC10ATNET (10 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/10
Copyright © 2018 Cyber Power Systems, Inc. All rights reserved.
Automatic Transfer Switch
USER'S MANUAL
4
Product Features
Technical Specifications
Switched Series Metered Series
Model Name PDU15SW10ATNET PDU15SWHVIEC12ATNET PDU15M10AT PDU15MHVIEC12AT
Input
Nominal Voltage 100-120V 200-240V 100-120V 200-240V
Frequency 50/60Hz
Derated Input Current 12A 12A(UL)/10A(CE) 12A 12A(UL)/10A(CE)
Plug Type (2) NEMA 5-15P (2) IEC-320 C14 (2) NEMA
5-15P (2) IEC-320 C14
Power Cord Type SR (14 AWG) Socket SR (14 AWG) Socket
Power Cord Length 10 ft/3.05 m
Output
Nominal Voltage 100-120V 200-240V 100-120V 200-240V
Derated Output Current 12A 12A(UL)/10A(CE) 12A 12A(UL)/10A(CE)
Outlet Type NEMA 5-15R IEC-320 C13 NEMA 5-15R IEC-320 C13
Outlet Number 10 12 10 12
Transfer Time Typical: 8-12ms
16ms max @ 60Hz/ 18ms max @ 50Hz
Management and Communications
Multifunction LCD Readout Voltage, Frequency, Load, Current, HW/FW Version, Network Information
Software PowerPanel® Business Edition
SNMP/ HTTP Capable Yes, with RMCARD Yes, with optional
RMCARD
Connectivity RJ45 (Serial Port)
Sensor Capable Optional
Physical
Dimension (W x H x D) 17.05" x 1.75" x 9.3"/433mm x 44mm x 236mm
Environmental
Humidity 0 to 95% Non-condensing
Altitude 13100 ft/4000 m
Temperature 32oF to 113oF/0oC to 45oC
Safety Approvals
Certifications UL 60950-1
FCC Class A
UL 60950-1
CE, FCC Class A
UL 60950-1
FCC Class A
UL 60950-1
CE, FCC Class A
* All specifications are subject to change without notice.
NEMA Type
IEC Type
A. SNMP/HTTP Network Slot
Allows users to remotely control and monitor the ATS PDU when installed
with CyberPower’s Remote Management Card.
B. Serial Port (RJ45 modular port)
Use serial port to connect with PC and execute local control of the ATS PDU.
C. Source Indicator
Indicates Source A or B is in use. When both sources are normal, selected
source shows constant green LED while another source shows blinking
green LED.
D. Output Indicator
Indicates load condition of the ATS PDU.
E. Multifunction LCD Readout
Displays various ATS PDU information such as power and load conditions.
F. Select Button
Use to control the LCD screen and toggle through the available
informational options.
G. Enter Button
Use to choose selected items, enter to next level menu or return to
previous menu.
H. AC Inlet/AC Power Cord
Use to connect ATS PDU to utility power or UPS.
I. Ground Stud
Use to ground the ATS PDU.
J. AC Output Receptacles
Provides power distribution for connected equipment.
K. Outlet Indicator (switched series only)
When the LED is on, the outlet is providing power to connected
equipment.
Front/Rear Panel Description (1U 15A Models)
Provides SNMP Ca rd Communi cation
Expansion Port
Sele ct
Ent er
PDU20SWHVIEC10ATNET
A
B
Source Output
- Normal
- Warnin g
- Ove rlo ad
QCN-0000003-00
Serial Port
A B C D E F G
H I K
J
H I K
J
SOU RCE A SOU RCE B
8 9 103 4 6
1 2 3 4 5 6 7 8 9 10 11 12
SO URCE A
SO URCE B
9
Installation Guide
Front Mounting
Step 1. Mounting Bracket Installation
Use the provided Mounting Bracket Screws (16) to attach the
Mounting Brackets (2) to the ATS PDU.
Step 2. Cord Retention Tray Installation (optional)
Adjust the length of the Cord Retention Tray till the screw hole on the
Tray and ATS PDU are aligned. Attach the Cord Retention Tray to the
ATS PDU with the 4 supplied Cord Retention Tray Mounting Screws.
Tighten the Cord Retention Tray with the screw on it.
Step 3. ATS PDU Mounting
Use the provided Washers (4) and Screws (4) to secure the ATS PDU
to your existing rack system.
Note: You may also use the screw sets provided by the rack to secure
the ATS PDU.
Please only use the provided screws for the entire installation process.
For 1U Models


Produktspezifikationen

Marke: CyberPower
Kategorie: Nicht kategorisiert
Modell: PDU20SWHVIEC10ATNET
Gewicht: 3801 g
Produktfarbe: Schwarz
Stecker: C20-Koppler
AC Eingangsfrequenz: 50 - 60 Hz
Betriebstemperatur: 0 - 45 °C
Zertifizierung: UL60950_1 certified by ETL (USA), CSA C22.2 (Canada), FCC Class A
Display: LCD
Anzahl Ethernet-LAN-AnschlĂĽsse (RJ-45): 1
Kabellänge: 3 m
Gehäusematerial: Metall
LED-Anzeigen: Ja
Temperaturbereich bei Lagerung: -15 - 45 °C
Abmessungen (BxTxH): 433 x 236.22 x 44.45 mm
Nachhaltigkeitszertifikate: RoHS
Anzahl serielle AnschlĂĽsse: 1
Höhe bei Betrieb: 0 - 4000 m
Anzahl der AC-Ausgänge: 10 AC-Ausgänge
AC-Steckertypen: C13 coupler, C19 coupler
Stromstärke (maximal): 20 A
Nominale Eingang Spannung: 200-240 V
Nominale Ausgang Spannung: 200-240 V
Management-Plattform: SNMP/HTTP
Rack-Kapazität: 1U
Höhe bei Lagerung: 0 - 15000 m
PDU-Typen: Geändert

Brauchst du Hilfe?

Wenn Sie Hilfe mit CyberPower PDU20SWHVIEC10ATNET benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert CyberPower

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-