CyberPower OR2200PFCRT2UA Bedienungsanleitung
CyberPower
UPS
OR2200PFCRT2UA
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für CyberPower OR2200PFCRT2UA (13 Seiten) in der Kategorie UPS. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/13
User’s Manual
OR1500PFCRT2U / OR2200PFCRT2U / OR2200PFCRT2Ua
K01-0000206-00
2
(SAVE THESE INSTRUCTIONS)
This manual contains important safety instructions. Please read and follow all instructions carefully during
installation and operation of the unit. Read this manual thoroughly before attempting to unpack, install, or
operate your UPS.
CAUTION! To prevent the risk of fire or electric shock, install in a temperature and humidity controlled indoor
area free of conductive contaminants. (Please see specifications for acceptable temperature and humidity
range).
CAUTION! To reduce the risk of electric shock, do not remove the cover except to service the battery. Ensure
the input power is removed before servicing the batteries. There are no user serviceable parts inside except for
the battery.
CAUTION! Hazardous live parts inside can be energized by the battery even when the AC input power is
disconnected.
CAUTION! The UPS must be connected to an AC power outlet with fuse or circuit breaker protection. Do
not plug into an outlet that is not grounded. If you need to de-energize this equipment, turn off and unplug the
unit.
CAUTION! To avoid electric shock, turn off the unit and unplug it from the AC power source before servicing
the battery or installing a computer component.
CAUTION! To reduce the risk of fire, connect only to a circuit provided with 20 (OR1500PFCRT2U and
OR2200PFCRT2U) or 30 (OR2200PFCRT2Ua) amperes maximum branch circuit over current protection in
accordance with the National Electric Code, ANSI/NFPA 70.
CAUTION! The UPS is suitable for use in a computer room as defined in the Standard for the Protection of
Electronic Computer/Data Processing Equipment, ANSI/NFPA 75.
DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT! CyberPower Systems does not sell
products for life support or medical applications. use in any circumstance that would affect the DO NOT
operation and safety of life support equipment, medical applications, or patient care.
DO NOT USE WITH OR NEAR AQUARIUMS! To reduce the risk of fire or electric shock, do not use with or
near an aquarium. Condensation from the aquarium can cause the unit to short out.
INTRODUCTION
Thank you for selecting a CyberPower Systems UPS product. This UPS is designed to provide unsurpassed
power protection, operation and performance during the lifetime of the product.
UNPACKING
Inspect the UPS upon receipt. The box should contain the following:
(a) UPS unit x 1 (b) User’s manual x 1 (c) Rack mount brackets x 2 (d) Vertical stands x 2 (e) Telephone cable x
1 (f) Emergency Power Off cable (gray) x 1 (g) PowerPanel
®
Business Edition software CD x 1 (h) Serial cable
x 1 (i) USB A+B type cable x 1 (j) Warranty registration card x 1
IMPORTANT SAFETY INSTRUCTIONS
INSTALLING YOUR UPS SYSTEM
3
SUPPORTS PFC POWER SUPPLIES
This CyberPower UPS system supports High Efficiency power supplies with Power Factor Correction (PFC).
PFC is used to improve the efficiency of power delivery. The current US Energy Star
®
Program Requirements
for Computers (version 5.0) mandates PFC for all power supplies over 100 watts. Additionally, programs such
as 80 Plus
®
are often used to identify high efficiency power supplies with PFC.
WHAT IS AVR
The OR1500PFCRT2U/OR2200PFCRT2U/OR2200PFCRT2Ua provides
complete power protection from utility power that is not always consistent.
The OR1500PFCRT2U features 1840 Joules of surge protection and the
OR2200PFCRT2U/OR2200PFCRT2Ua features 2060 Joules of surge
protection. Both units provide long lasting battery backup during power
outages with maintenance free batteries. The OR1500PFCRT2U /
OR2200PFCRT2U / OR2200PFCRT2Ua ensures consistent power to your
computer system and includes software that will automatically save your
open files and shutdown your computer system during a utility power loss.
AUTOMATIC VOLTAGE REGULATOR
The OR1500PFCRT2U/OR2200PFCRT2U/OR2200PFCRT2Ua stabilizes inconsistent utility power voltage to
nominal levels that are safe for equipment. Inconsistent incoming utility power may be damaging to important
data files and hardware, but with Automatic Voltage Regulation (AVR), damaging voltage levels are corrected
to safe levels. AVR automatically increases low utility power and decreases high utility power to a consistent
and safe 110/120 volts. If incoming utility voltage drops below 90 volts, or exceeds 140 volts the units
automatically switch to battery back-up power.
HOW TO DETERMINE THE POWER REQUIREMENTS OF YOUR EQUIPMENT
1. Ensure that the equipment plugged into the outlet does not exceed the UPS unit’s rated capacity
(1500VA/900W for OR1500PFCRT2U, 2000VA/1320W for OR2200PFCRT2U, and 2200VA/1320W for
OR2200PFCRT2Ua). If the rated capacities of the unit are exceeded, an overload condition may occur and
cause the UPS unit to shut down or the circuit breaker to trip.
2. There are many factors that can affect the amount of power that your computer system will require. It is
suggested that the load placed on the battery outlets not exceed 80% of the unit’s capacity.
HARDWARE INSTALLATION GUIDE
1. Your new UPS may be used immediately upon receipt. However,
recharging the battery for at least 8 hours is highly recommended
to ensure that the battery’s maximum charge capacity is achieved.
A loss of charge may occur during shipping and storage. To recharge
the battery, simply leave the unit plugged into an AC outlet.
2. With the UPS unit turned off and unplugged, connect your computer,
monitor, and any other peripherals requiring battery backup into the
battery power supplied outlets. For pluggable equipment, the socket-outlet
shall be installed near the equipment and shall be easily accessible.
DO NOT plug a laser printer, paper shredder, copier, space heater, vacuum,
sump pump or other large electrical devices into the UPS. The power demands
of these devices may overload and damage the unit.
3. To protect a fax, phone or modem, connect a telephone cable or network cable from
the wall jack outlet to the IN jack of the UPS. Connect a telephone cable or network
cable from the OUT jack of the UPS to a fax machine, telephone, modem, or network
devices.
4. Plug the UPS into a 2 pole, 3 wire grounded receptacle (wall outlet). Make sure the
wall branch outlet is protected by a fuse or circuit breaker and does not service equipment
with large electrical demands (e.g. air conditioner, copier, etc…). The warranty prohibits
the use of extension cords, outlet strips, and surge strips.
Produktspezifikationen
| Marke: | CyberPower |
| Kategorie: | UPS |
| Modell: | OR2200PFCRT2UA |
Brauchst du Hilfe?
Wenn Sie Hilfe mit CyberPower OR2200PFCRT2UA benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung UPS CyberPower
3 Oktober 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
Bedienungsanleitung UPS
- UPS Approx
- UPS Gembird
- UPS HP
- UPS Voltcraft
- UPS AEG
- UPS Siemens
- UPS IKEA
- UPS Dell
- UPS LC-Power
- UPS Tripp Lite
- UPS GYS
- UPS Adj
- UPS Block
- UPS Digitus
- UPS APC
- UPS Eaton
- UPS EnerGenie
- UPS Emerson
- UPS Furman
- UPS Riello
- UPS Puls Dimension
- UPS Avocent
- UPS Atlantis Land
- UPS Vanson
- UPS Phoenix Contact
- UPS Minuteman
- UPS V7
- UPS Equip
- UPS Salicru
- UPS SurgeX
- UPS Bxterra
- UPS Altronix
- UPS FSP
- UPS Ditek
- UPS PowerWalker
- UPS FSP/Fortron
- UPS East
- UPS Liebert
- UPS Murr Elektronik
- UPS Online USV
Neueste Bedienungsanleitung für -Kategorien-
13 Oktober 2024
13 Oktober 2024
13 Oktober 2024
13 Oktober 2024
13 Oktober 2024
13 Oktober 2024
13 Oktober 2024
13 Oktober 2024
11 Oktober 2024
9 Oktober 2024