CyberPower Home Theater HT706UC Bedienungsanleitung

CyberPower Nicht kategorisiert Home Theater HT706UC

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für CyberPower Home Theater HT706UC (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Copyright © 2018 Cyber Power Systems (USA), Inc. All rights reserved.
CONGRATULATIONS ON YOUR PURCHASE
Thank you for selecting the CyberPower HT706UC
Premium Surge Protector. This manual explains the
features and operation of the HT706UC. Please take a few
moments to read this manual.
FEATURES
1. ON/OFF Reset Control Switch and Circuit Breaker
Controls power to all outlets. The switch is also a 15A
breaker. When an overload occurs, it will automatically
switch o. To resume operation, ensure the overload
condition is removed then reset the surge protector by
switching the unit ON.
2. Firestop Design Advanced Metal-Oxide Varistor
(MOV) with Built-In Fuses
Encased component dissipates surge events and
potential flame, sparks, and heat.
3. Wrapped Cord and Right-Angle Plug
Easy to coil. Kink and abrasion-resistant cord with
low-prole right-angle plug for easy cord management.
4. Advanced Protection - Surge Protected LED
Illuminated when protection is working properly.
5. Clean Power - Ground LED
Illuminated when properly grounded.
6. Seven Outlets
6 standard and 1 transformer spaced outlets.
7. USB Charging Ports*
Connect and charge up to 2 USB devices using the
surge protected USB charging ports.
*USB outlets cannot be used as a USB hub. This device
does not transfer data.
8. Coaxial Cable Protection
Protects coaxial lines from surges and spikes.
SPECIFICATIONS
HT706UCModel Number:
6 standard and 1 transformer spaced outletsOutlets:
5V/4.8A totalUSB Charging Rating:
Power Cord Length: 5 ft
Surge Protection: 2,280 Joules
125V/15A/1875WElectrical Rating:
UL Clamping Voltage: UL 1449 3rd/500V (L-N, L-G, L-G)
75,000AMaximum Peak Current:
3 AC Lines Protected: H-N: 45,000A, H-G: 15,000A,
N-G: 15,000A (The maximum surge possible on
household wiring is 6,000 volts)
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only
in dry locations and only indoors. DO NOT plug into
another relocatable power tap. DO NOTdaisy chain”
surge protectors. DO NOT use with any aquarium
equipment. DO NOT use if properly grounded outlets are
not available. DO NOT install this device if there is less
than 10 meters (30 feet) or more of wire between the
electrical outlet and electrical service panel. This device
features an internal protection that will disconnect the
surge protective component at the end of its useful life,
but it will maintain unprotected power to the load.
TROUBLESHOOTING
If the grounded indicator does not light when you plug in
the surge protector, move the surge protector to a
dierent grounded three-prong AC outlet. If it still does
not light, return the product to the dealer for assistance.
If the surge protector proves to be working properly,
your outlets may not be a properly grounded and need
to be repaired by a professional electrician. If the
grounded indicator turns o after a period of use, the
surge protection has been depleted. Replace your surge
protector. If the protected indicator does not light, the
surge protector’s AC lines is no longer protected from
surge. The surge protector may have received a power
surge or spike beyond its specified limits that overloaded
the protection circuitry and rendered it inactive. The
surge protector has protected your connected
equipment as designed, but it will not protect against
future surges, and spikes. It should be replaced.
TECHNICAL SUPPORT
Please contact our Tech Support Department with
installation, troubleshooting, or general product questions.
• Phone: 1-877-297-6937
• Email: tech@cpsww.com
• Hours of Operation:
Monday – Friday 7:00am – 6:00pm CST
USERS MANUAL
7-Outlet Surge Protector
HT706UC
7-Outlet Surge Protector
HT706UC
1 2
Less than 1 nanosecondResponse Time:
Attenuation: Up to 43dB
EMI/RFI Filtration: 150 kHz to 100 MHz
Circuit Breaker: Resettable 15 Amp
4.8A
4
5
6
AD VAN CE D
PR OTE CT IO N
PO WE R
CL EAN
1
2
7
8
3
3 4
K01-0000663-00
LIMITED WARRANTY AND CONNECTED
EQUIPMENT GUARANTEE
Read the following terms and conditions carefully before
using the CyberPower HT706UC (the “CPS product”). By
using the CPS product, you consent to be bound by the
terms and conditions of this Limited Warranty and
connected equipment guarantee (together referred to as this
“Warranty”). IF YOU DO NOT AGREE TO THE TERMS AND
CONDITIONS OF THIS WARRANTY, YOU SHOULD RETURN
THE PRODUCT FOR A FULL REFUND PRIOR TO USING IT.
Who is providing this Warranty, what does it cover?
Cyber Power Systems (USA), Inc. (“CyberPower”) provides
this Limited Warranty. It only covers the original purchaser
and ends if you no longer own the CPS product. This
Warranty covers defects in materials and workmanship in the
CPS product under normal use and conditions. It also covers
equipment connected to the CPS product damaged because
of the failure of the CPS product. This Warranty covers the
CPS product and connected equipment for as long as you
own the CPS product.
How do you open a connected equipment claim?
1. Call us at (877) 297-6937, or write to us at Cyber Power
Systems (USA), Inc., 4241 12th Ave. E., STE 400, Shakopee, MN
55379, or send us an email message at claims@cpsww.com
for instructions, within 10 days of the occurrence.
2. When you contact CyberPower, identify the product, the
purchase date, and the item(s) of connected equipment.
Have information on all applicable insurance or other
resources of recovery/payment that are available to the
Initial Customer, and request a claim number.
3. You must provide a dated purchase receipt (or other proof
of the original purchase) for the CyberPower unit and
connected equipment. You also need to provide a
description of the damage to your connected equipment.
4. Pack and ship the product to CyberPower and, if
requested, the item(s) of connected equipment, a repair
cost estimate for the damage to the connected
equipment, and all claim forms that CyberPower provides
to you. Show the claim number on the shipping label, or
include it with the product. You must prepay all shipping
costs. You are responsible for packaging and shipment,
and you must pay the cost of the repair estimate.
What will CyberPower do to correct problems?
CyberPower will inspect and examine the CPS product. If the
CPS product is defective in material or workmanship,
CyberPower will repair or replace it at CyberPower’s
expense, or CyberPower will refund the full purchase price
you paid for the CPS product (purchase receipt showing
price paid is required). If the CPS product failed to protect
any equipment plugged into it, we will also send you forms
for making your claim for the connected equipment. We will
repair or replace the equipment that was damaged because
This device is manufactured using environmentally-safe procedures in
compliance with the Restriction of Hazardous Substances (RoHS) directive.
Please join CyberPower in caring for the
environment by recycling this manual.
PRODUCT REGISTRATION
Prompt product registration assures coverage under the Limited
Warranty, and also allows the opportunity of notifications for
product enhancements, upgrades, and other announcements.
Registration is quick and easy. Go to the Product Registration
Page at www.cyberpowersystems.com/registration.
CONTACT INFORMATION
Cyber Power Systems, Inc. 4241 12th Avenue East Suite 400
Shakopee, MN 55379
Toll-free: 1-877-297-6937 | CyberPowerSystems.com
CONFORMANCE APPROVALS
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference. (2) This device must accept
any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications to this unit, not expressly
approved by the party responsible for compliance, could void
the user’s authority to operate the equipment. This Class B
digital apparatus complies with Canadian ICES-003 (CAN
ICES-3 (B)/NMB (B)).
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and radiates radio
frequency energy. If not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
of the failure of the CPS product or pay you the fair market
value (NOT REPLACEMENT COST) of the equipment at of
the time of the damage. We will use Orion Blue Book,
another third-party valuation guide, eBay, Craigslist, or other
source to establish that amount. Our maximum liability is
limited to $300,000 for the HT706UC.
Who pays for shipping?
We pay when we send items to you; you pay when you send
items to us.
What are some things this Warranty does not cover?
1. THIS WARRANTY DOES NOT COVER ANY SOFTWARE THAT
WAS DAMAGED, NEEDS TO BE REPLACED DUE TO THE
FAILURE OF THE CPS product, ANY DATA THAT IS LOST AS
A RESULT OF THE FAILURE, THE RESTORATION OF DATA
OR RECORDS, OR THE REINSTALLATION OF SOFTWARE.
2. This Warranty does not cover: misuse, modification,
operation or storage outside of the environmental limits of
the CPS product or the equipment connected to it, for
damage while in transit or in storage, if there has been
improper operation or maintenance, or use with items not
designed or intended for use with the CPS product, such
as laser printers, appliances, aquariums, medical, or life
support devices, etc.
What are the other limitations?
The sole and exclusive remedies of the Initial Customer are
those provided by this Warranty.
1. This Warranty does not apply unless the CPS product and
the connected equipment were connected to properly
wired and grounded outlets (including compliance with
electrical and safety codes of the most current electrical
code), without the use of any adapters or other connectors.
2. The CPS product must have been plugged directly into the
power source. The equipment connected to the CPS
product must be directly connected in the CPS product,
not “daisy chained” together in serial fashion with any
extension cords, another product or device similar to the
CPS product, surge suppressor, or power tap. Any such
installation voids the Warranty.
3. The CPS product and connected equipment must have
been used properly in a suitable environment, in
conformance with any applicable license, instruction
manual, or warnings.
4. The CPS product must have been used at all times within
the limitations on the CPS product’s VA capacity.
Where can I get more information?
Contact CyberPower at 4241 12th Ave E., STE 400, Shakopee,
MN 55379; call us at (877) 297-6937; or send us an email
message at claims@cpsww.com.
© 2018 Cyber Power Systems (USA), Inc. All rights reserved.
All other trademarks are the property of their respective owners.
UL Listed to U.S. and Canadian Safety Standards UL 1449. This product
is listed to applicable U.S. and Canadian safety standards by
Underwriters Laboratories Inc.
Full compliance with RoHS.


Produktspezifikationen

Marke: CyberPower
Kategorie: Nicht kategorisiert
Modell: Home Theater HT706UC

Brauchst du Hilfe?

Wenn Sie Hilfe mit CyberPower Home Theater HT706UC benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert CyberPower

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-