CyberPower CSP806U Bedienungsanleitung

CyberPower Nicht kategorisiert CSP806U

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für CyberPower CSP806U (3 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 22 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/3
Copyright © 2017 Cyber Power Systems, Inc. All rights reserved.
CONGRATULATIONS ON YOUR PURCHASE
Thank you for selecting the CyberPower CSP806U Surge
Protector. The information contained in this brochure explains
the features and operation of the CSP806U. Please take a few
moments to read this manual.
FEATURES
1. Protected LED Indicator
Illuminated when the surge protection feature is working properly.
2. Grounded LED Indicator
Illuminated when a properly grounded AC outlet is detected.
3. ON/OFF Reset Control Switch and Circuit Breaker
Controls power to all outlets. The switch is also a 15A
breaker. When an overload occurs, it will automatically
switch o. To resume operation, ensure the overload
condition is removed and reset the surge protector by
switching the unit ON.
4. USB Charging Ports*
Connect and charge up to two (2) USB devices using the
surge protected USB charging ports.
*USB outlets cannot be used as a USB hub. This device does
not transfer data.
5. Wide-Spaced Outlet
Easily plug in large chargers without interfering with the
other outlets.
SPECIFICATIONS
• Model Number: CSP806U
• Outlets: 6 Standard Outlets, 2 Transformer Spaced outlets, 2
USB charge ports (2.4 Amps, shared)
• Surge Protection: 3,000 Joules
• Electrical Rating: 125V/15A/1875W
• UL Clamping Voltage: UL 1449 3rd/600V(H-N, H-G, N-G)
• Maximum Peak Current: 105,000A
• 3 AC Lines Protected: H-N: 45,000A; H-G: 30,000A;
N-G: 30,000A
• Response Time: Less than 1 nanosecond
• USB charger rating: 5V/2.4A total
• Circuit Breaker: Resettable 15 Amp
• Plug Style: Right angle type
• Power Cord Length: 6 ft cord
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in
dry locations and only indoors. DO NOT plug into another
relocatable power tap. DO NOT “daisy chain” surge
protectors. DO NOT DO use with any aquarium equipment.
NOT use if properly grounded outlets are not available. DO
NOT install this device if there is not at least 10 meters (30
feet) or more of wire between the electrical outlet and
electrical service panel. This device features an internal
protection that will disconnect the surge protective
component at the end of its useful life, but will maintain
power to the load – now unprotected.
TROUBLESHOOTING
If the ON/OFF is switched o, the 15 AMP circuit breaker may
have tripped. Examine your connected equipment and
remove the device that is overloading the circuit. Then, the
ON/OFF switch back to .RESET
If the indicator does not light when you plug in the Grounded
surge protector, move the surge protector to a dierent
grounded three-prong AC outlet. If it still does not light,
return the product to dealer for assistance. If the surge
protector proves to be working properly, your outlets may
not be a properly grounded and need to be repaired by a
professional electrician. If the indicator turns o Grounded
after a period of use, the surge protection has been depleted.
Replace your surge protector.
If the Protected indicator does not light, the surge protector’s
AC lines is no longer protected from surge. Replace the surge
protector. The surge protector may have received a power
surge or spike beyond its specified limits that overloaded the
protection circuitry and rendered it inactive. The surge
protector has protected your connected equipment, but it
will not protect against future surges and spikes.
TECHNICAL SUPPORT
Please contact our Tech Support department with
installation, troubleshooting, or general product questions.
• Phone: 1-877-297-6937
• Email: tech@cpsww.com
• Hours of Operation: Monday – Friday
7:00am – 6:00pm CST
USER’S MANUAL
8-Outlet Surge Protector
CSP806U
8-Outlet Surge Protector
CSP806U
1 2
2.4A USB
PROTECTED GROUNDED
3
12
4
5
LIMITED WARRANTY AND CONNECTED
EQUIPMENT GUARANTEE
Read the following terms and conditions carefully before
using the CyberPower CSP806U (the “CPS Product”). By
using the CPS Product, you consent to be bound by the
terms and conditions of this Limited Warranty and
Connected Equipment Guarantee (together referred to as
this “Warranty”). IF YOU DO NOT AGREE TO THE TERMS
AND CONDITIONS OF THIS WARRANTY, YOU SHOULD
RETURN THE PRODUCT FOR A FULL REFUND PRIOR TO
USING IT.
Who is providing this Warranty, what does it cover?
Cyber Power Systems (USA), Inc. (“CyberPower”) provides
this Limited Warranty. It only covers the original purchaser
and ends if you no longer own the CPS Product. This
warranty covers defects in materials and workmanship in the
CPS Product under normal use and conditions. It also covers
equipment connected to the CPS Product and damaged
because of the failure of the CPS Product. This warranty
covers the CPS Product and connected equipment for as
long as you own the CPS Product.
How Do You Open A Connected Equipment Claim?
1. Call us at (877) 297-6937 or write to us at Cyber Power
Systems (USA), Inc., 4241 12th Ave. E., STE 400,
Shakopee, MN 55379, or send us an e-mail message at
claims@cpsww.com for instructions, within 10 days of
the occurrence.
2. When you contact CyberPower, identify the Product, the
Purchase Date, and the item(s) of Connected Equipment.
Have information on all applicable insurance or other
resources of recovery/payment that are available to the
Initial Customer and Request a Claim Number.
3. You must provide a dated purchase receipt (or other proof
of the original purchase) for the CyberPower unit and
connected equipment. You also need to provide a
description of the damage to your connected equipment.
4. Pack and ship the product to CyberPower and, if
requested, the item(s) of Connected Equipment, a repair
cost estimate for the damage to the Connected
Equipment, and all claim forms that CyberPower provides
to you. Show the Claim Number on the shipping label or
include it with the product. You must prepay all shipping
costs, you are responsible for packaging and shipment,
and you must pay the cost of the repair estimate.
What will CyberPower do to correct problems?
CyberPower will inspect and examine the CPS Product. If the
CPS Product is defective in material or workmanship,
CyberPower will repair or replace it at CyberPower’s
expense, or CyberPower will refund the full purchase price
you paid for the CPS Product (purchase receipt showing
price paid is required). If the CPS Product failed to protect
any equipment plugged into it, we will also send you forms
for making your claim for the connected equipment. We will
repair or replace the equipment that was damaged because
of the failure of the CPS Product or pay you the fair market
value (NOT REPLACEMENT COST) of the equipment at of
the time of the damage. We will use Orion Blue Book,
another a third-party valuation guide, eBay, craigslist, or
other source to establish that amount. Our maximum liability
is limited to $300,000 for the CSP806U.
Who pays for shipping?
We pay when we send items to you; you pay when you send
items to us.
What are some things this Warranty does not cover?
1. THIS WARRANTY DOES NOT COVER ANY SOFTWARE
THAT WAS DAMAGED OR NEEDS TO BE REPLACED DUE
TO THE FAILURE OF THE CPS PRODUCT OR ANY DATA
THAT IS LOST AS A RESULT OF THE FAILURE OR THE
RESTORATION OF DATA OR RECORDS, OR THE
REINSTALLATION OF SOFTWARE.
2. This Warranty does not cover: misuse, modification,
operation or storage outside environmental limits of the
CPS Product or the equipment connected to it, or for
damage while in transit or in storage, nor if there has been
improper operation or maintenance, or use with items not
designed or intended for use with the CPS Product, such
as laser printers, appliances, aquariums, medical or life
support devices, etc.
What are the other limitations?
The sole and exclusive remedies of the Initial Customer are
those provided by this Warranty.
1. This Warranty does not apply unless the CPS Product and
the connected equipment were connected to properly
wired and grounded outlets (including compliance with
electrical and safety codes of the most current electrical
code), without the use of any adapters or other connectors.
2. The CPS Product must have been plugged directly into the
power source and the equipment connected to the CPS
Product must be directly connected in the CPS Product,
not “daisy-chained” together in serial fashion with any
extension cords, another Product or device similar to the
CPS Product, surge suppressor, or power tap. Any such
installation voids the Warranty.
3. The CPS Product and connected equipment must have
been used properly in a suitable and proper environment,
in conformance with any applicable license, instruction
manual, or warnings.
4. The CPS Product must have been used at all times within
the limitations on the CPS Product’s VA capacity.
This device is manufactured using environmentally-safe
procedures in compliance with the Restriction of
Hazardous Substances (RoHS) directive.
Please join CyberPower in caring for the
environment by recycling this manual.
3 4
Where can I get more information?
Contact CyberPower at 4241 12th Ave E., STE 400, Shakopee,
MN 55379; call us at (877) 297-6937; or send us an e-mail
message at claims@cpsww.com.
PRODUCT REGISTRATION
Prompt product registration assures coverage under the
Limited Warranty, and also allows the opportunity to be notified
of product enhancements, upgrades, and other announcements.
Registration is quick and easy. Go to Product Registration
page at www.cyberpower.com.
CONTACT INFORMATION
Cyber Power Systems, Inc. 4241 12th Avenue East Suite 400
Shakopee, MN 55379
Toll-free: 1-877-297-6937 | CyberPower.com
CONFORMANCE APPROVALS
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, And (2)
This device must accept any interference received, including
interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment. This Class B
digital apparatus complies with Canadian ICES-003.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Cyber Power Systems, Inc.
www.cyberpower.com

Produktspezifikationen

Marke: CyberPower
Kategorie: Nicht kategorisiert
Modell: CSP806U

Brauchst du Hilfe?

Wenn Sie Hilfe mit CyberPower CSP806U benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Nicht kategorisiert CyberPower

CyberPower

CyberPower Rackbar RKBS20ST6F12R Bedienungsanleitung

13 Oktober 2024
CyberPower

CyberPower Rackbar RKBS20ST6F8R Bedienungsanleitung

7 Oktober 2024
CyberPower

CyberPower RMCARD305 Bedienungsanleitung

4 Oktober 2024
CyberPower

CyberPower SB0602BA-DE-B50 Bedienungsanleitung

24 September 2024
CyberPower

CyberPower SB0802AD-DE-W24 Bedienungsanleitung

24 September 2024
CyberPower

CyberPower SB0502BA-DE-B70 Bedienungsanleitung

24 September 2024
CyberPower

CyberPower SB0502BA-DE-W70 Bedienungsanleitung

24 September 2024
CyberPower

CyberPower SB0702AD-DE-B30 Bedienungsanleitung

24 September 2024
CyberPower

CyberPower SB0602BA-DE-W18 Bedienungsanleitung

24 September 2024
CyberPower

CyberPower SB0702AD-DE-W30 Bedienungsanleitung

24 September 2024

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-

DAS Audio

DAS Audio AX-112-5 Bedienungsanleitung

16 Oktober 2024
Ferplast

Ferplast Ergocomfort Freetime Bedienungsanleitung

16 Oktober 2024
AEG

AEG MECK52 Bedienungsanleitung

16 Oktober 2024
Makita

Makita UR012G Bedienungsanleitung

16 Oktober 2024
Stihl

Stihl HT 70 Bedienungsanleitung

16 Oktober 2024
Ernesto

Ernesto H14270 Bedienungsanleitung

16 Oktober 2024
IFM

IFM AC901S Bedienungsanleitung

16 Oktober 2024
Nedis

Nedis RFPOM120FBK Bedienungsanleitung

16 Oktober 2024
AEG

AEG E9KLCS01 Bedienungsanleitung

16 Oktober 2024
ART

ART ProChannel II Bedienungsanleitung

16 Oktober 2024