CyberPower CS16U48V-8 Bedienungsanleitung
CyberPower
UPS
CS16U48V-8
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für CyberPower CS16U48V-8 (2 Seiten) in der Kategorie UPS. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
User’s Manual for
CyberShield
CS50U48V
CS16U48V-8
CyberShield UPSs are designed to provide a local power solution for
cable telephony, wireless local loop (WLL), and fiber to the home
(FTTH) broadband equipment.
IMPORTANT SAFETY WARNINGS
(SAVE THESE INSTRUCTIONS)
This manual contains important instructions regarding the installation and operation of this device.
Read this manual thoroughly before attempting to unpack , install or operate this device
CAUTION! The battery can energize hazardous live parts inside even when the AC input power is
disconnected.
CAUTION! To prevent the risk of fire or electric shock, install in a temperature and humidity
controlled indoor area, free of conductive contaminants. (Please see specifications for
acceptable temperature and humidity range).
CAUTION! To reduce the risk of electric shock, do not remove the cover, except to service the
battery. No user serviceable parts inside, except for the battery.
CAUTION! To avoid electric shock, turn off the unit and unplug it from the AC power source before
servicing the battery or installing a computer component.
ENCLOSURE INSTALLATION
Carefully follow these instructions during installation of this device:
1.) Carry out the installation in a safe area that is free of excessive dust and has adequate airflow.
2.) Screws must be appropriate for total weight of the UPS and the mounting surface material /
3.) Do not operate the UPS where the temperature and humidity are outside the specified limits.
(Refer to specification in this manual.)
BATTERY REPLACEMENT
This battery is hot-swappable. As long as utility power is on , you may leave the UPS and connected
equipment on while replacing a new battery.
Once the battery is disconnected, the connected equipment is not protected from power
outages.
Deliver spent batteries to a recycling facility or ship to the manufacturer in the
replacement battery packing material.
WARNING INDICATOR
OPERATION
Connect: Equipment and Power
Step1. Plug the UPS power cord into the utility power cord inlet
Step2. Plug the UPS power cord into the wall outlet.
The UPS battery charges when it is connected to utility power. The battery charges
fully during the first 24 hours of normal operation. Do not expect full battery run
capability during this initial charge period.
COLD START
The cold start feature is for applying power to the UPS and connected equipment when the UPS is
off and there is no utility power. Before using the cold start feature, please make sure the battery is
charged. To start the cold start feature, press the recessed cold start button with a small pointed
object.
UPS is on utility power.
UPS is on battery power.
DC output power is provided by the battery or
utility power.
The battery is not connected or the battery
needs to be replaced.
Green
Yellow
Green
Red
Indicator Color Condition
Tufq!2;!
b/!Sfnpwf!uif!cbuufsz!dpwfs/
Tufq!3;!
b/!Votusbq!tusbq!gspn!cbuufsz/
c/!Tmjef!cbuufsz!pgg!pg!uif
!!!tifmg/
d/!Ejtdpoofdu!cbuufsz!dbcmf
!!!dpoofdups!bu!dibttjt!foe/
Tufq!4;!
b/!Vtf!uif!fodmptfe!jotubmmbujpo!ufnqmbuf!!up
!!!nbsl!bo!jotubmmbujpo!mpdbujpo!gps!uif!voju/
c/!Npvou!uif!voju!po!uif!xbmm!xjui!3!npvoujoh
!!!tdsfxt!joup!uif!lfzipmf!tmput/
d/!Ujhiufo!uif!tdsfxt!up!tfdvsf!uif!vojut/
e/!Dpoofdu!uif!cbuufsz!dpoofdups!boe!sfqmbdf
!!!uif!cbuufsz!cbdl/
CS50U48V
CS16U48V-8
Release T
Release T
Release T
Release Tab
ab
ab
ab
Battery Cover
Battery Cover
Battery Cover
Battery Cover
Tufq!2;!
b/!Sfnpwf!uif!cbuufsz!dpwfs/
Tufq!3;!
b/!Mpptfo!uif!cbuufsz!tusbq/
c/!Ejtdpoofdu!cbuufsz!dbcmf!dpoofdups
!!!up!sfnpwf!cbuufsz/
d/!Sfqmbdf!xjui!ofx!cbuufsz!boe
!!!sf.dpoofdu!uif!cbuufsz!dpoofdups/
Tufq!4;!
b/!Ujhiufo!uif!cbuufsz!tusjq!boe
!!!dmptf!uif!cbuufsz!dpwfs/
CS50U48V
CS16U48V-8
PLUG-IN
PLUG-IN
PLUG-IN
PLUG-IN
BATTER
BATTER
BATTER
BATTERY
Y
Y
Y
HERE
HERE
HERE
HERE
Battery Cover
Battery Cover
Battery Cover
Battery Cover
Release T
Release T
Release T
Release T
ab
ab
ab
ab
Front Panel
CS16U48V-8 CS50U48V
INTELLIGENT BACK-UP POWER
TM
AC OUT PUT BAT T ERY
INTELLIGENT BACK-UP POWER
TM
AC OUTPUT BATT ERY
COMMUNICATION SIGNALS
The communication signals of this unit are isolated from the internal circuitry via open collector opto-
coupled transistors. The connection “SIG RTN” (Signal Return) is a common return point for all
communication signals. In the typical application, the attached equipment digital ground connects to
Signal Return, and pull-up resistors turn the open collector signals into logic levels.
SPECIFICATION
LIMITED WARRANTY
CyberPower warrants to you, the Initial Purchaser, that the Product will be free from defects in material and workmanship for three years from the date of original purchase, subject to the terms of this Limited
Warranty. This Limited Warranty gives you specific rights, and you may have other rights, which vary from State to State or Province to Province.
Any Implied Warranty of Merchantability or for Fitness for a Particular Purpose, if applicable to the Product, is limited in duration to three years. This provision shall NOT create any Implied Warranty or
Merchantability or of Fitness for a Particular Purpose that would not otherwise apply to the Product. NOTE: Some States and Provinces do not allow limitations on how long an implied warranty lasts,
so the above limitation may not apply to you.
To be covered you must still be the owner of the Product at the time of the failure that results in the claim made under this Limited Warranty. Your sole and exclusive remedies are those provided by this
Limited Warranty. This exclusion of other express warranties applies to written and oral express warranties. CyberPower excludes any liability for personal injury. CyberPower excludes any liability for direct,
indirect, special, incidental, or consequential damages, whether for damage to or loss of property, loss of profits, business interruption, information or data. This exclusion applies even though damage or loss
is caused by negligence or other fault. NOTE: Some States or Provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you.
DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT OR OTHER HIGH RISK ACTIVITIES.
CyberPower does not sell the PRODUCT for use in high-risk activities. The PRODUCT is not designed or intended for use in hazardous environments requiring fail-safe performance, including the operation
of nuclear facilities, aircraft navigation or communication systems, air traffic control, weapons systems, life support or medical applications or for use in any circumstance in which the failure of the PRODUCT
could lead directly to death, personal injury, or severe physical or property damage, or that would affect operation or safety of any medical or life support device (collectively, "High Risk Activities").
CyberPower expressly disclaims any express or implied warranty of fitness for High Risk Activities. CyberPower does not authorize use of any PRODUCT in any High Risk activities.
ANY SUCH USE IS IMPROPER AND IS A MISUSE OF A CYBERPOWER PRODUCT.
The Limited Warranty is governed by the laws of the United States and the State of Minnesota, without reference to conflict of law principles. The application of the United Nations Convention of Contracts for
the International Sale of Goods is expressly excluded
FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with these instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1)Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an
experienced radio/TV technician for help.
CAUTION: Shielded signal cables must be used with this device to ensure compliance with Class B FCC limits.
CAUTION: Any changes or modifications not expressly approved by Cyber Power could void the authority granted by the FCC to operate this equipment.
For more information, please contact:
CyberPower Systems ( USA ), Inc. 5555 12th Avenue East, Suite 110, Shakopee, MN55379 Phone: (952)403-9500 Fax: (952)403-0009 www.cyberpowersystems.com
CyberPower Systems ( EUROPE ), Inc.. Rietwaard 2, 5236 WB, ‘s-Hertogenbosch, Netherlands E-mail: sales@cyberpower-eu.com www.cyberpower-eu.com
Input
Voltage Range
Frequency Range
Output
On Battery Output Voltage
Continuous Power Capability
Output Power Max
Efficiency (at 75% Max Load)
Battery
Battery Type
Numbers of Battery
Typical Recharge Time
Replaceable
Surge Protection and Filtering
Lightning / Surge Protection
Warning Diagnostics
Indicators
Management
Auto-Charge
Communication Interface
Physical
Maximum Dimensions (L*W*D)
Weight (kg)
Environment
Operating Temperature
Operating Humidity
Max Operating Elevation
Max Storage Elevation
Storage Temperature
85Vac - 264Vac (Universal Input)
47 - 70 Hz
48Vdc
16W 50W
16W 50W
> 75 %
Sealed, Maintenance Free Lead-Acid Battery
Yes
Yes
AC, Output, Battery
Yes
On Battery, Replace Battery, Battery Missing,
Low Battery
16.7cm x 24cm x 8.1cm 30cm x 28cm x 9.9cm
32oF - 104oF (0 - 40oC)
0 - 95% noncondensing within enclosure
10,000ft (3,000m)
50,000ft (15,000m)
5o
F - 113oF (-15oC - 45oC)
12V
12V RTN
SIG RTN
ON BATTERY
REPLACE
BATTERY
BATTERY
MISSING
LOW BATTERY
48V
48V RTN
SIG RTN
ON BATTERY
REPLACE
BATTERY
BATTERY
MISSING
LOW BATTERY
+ Voltage output
- Voltage output
Signal return
Low when operating from utility line.
Open when operating from battery.
Low when battery is charged.
Open when battery fails the Self Test.
Low when battery is present.
Open when battery is missing.
Low when battery is near full charge
capacity.
Open when operating from a battery
with < 20% capacity.
CS50U48V
CS16U48V-8
CS30U12V-20
CS24U12V
CS24U12V-12 Message
K01-DC48V2A
Model CS16U48V-8 CS50U48V
8AH/12V x 1 20AH/12V x 1
3.28 7.7
12Hours 24Hours
Back Panel
CS16U48V-8 CS50U48V
Buzzer On/Off Switch : The default position of the buzzer switch is OFF. If you want to enable this
function, there is a button inside the hole, please insert a paper clip or small pointed object into the
hole and press the button. In case of utility failure (on battery ), it will emit a long beep. In case of
low battery, it will emit a short beep.
LI STED
Must be prop erly recycled or dis pos e d.
Contains s e aled no ns pillable lea d acid bat ter y.
/ CS50U48V
Bu zz er ON/OFF S witch
OFF ON
CAUTION:
FOR USE IN A CONTROLLED ENVIRONMENT.
REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
REFER TO MANUAL FOR ENVIRONMENTAL CONDITIONS.
E235457
68FG
100-240V~ 50-60Hz ; 2.0A
FCC CLASS B VERI FIED
INPUT:
R
OUTPUT:
Made In China
48V 50W
RISK OF ELECTRICAL SHOCK. DO NOT
US
100-240V~ 50-60Hz; 0.75A
Battery must be recycled or dispos ed of properly.
Contains se aled nonspillable lead acid batte ry.
RISK OF ELECTRICAL SHOCK. DO NOT
REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFI ED SERVICE PERSONNE L.
REFER TO MANU AL FOR ENVIRONMENT AL CONDITI ONS.
FOR USE IN A CONTROLLED ENVIRONME NT.
INPUT:
Made In China
E235457
US
LIST ED
68FG
R
CAUTION:
12V 24W
OUTPUT :
FCC C LASS B VERIFIED
/ CS24U12V-12
ONOFF
Buz z er ON/OFF S witch
Produktspezifikationen
| Marke: | CyberPower |
| Kategorie: | UPS |
| Modell: | CS16U48V-8 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit CyberPower CS16U48V-8 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung UPS CyberPower
3 Oktober 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
Bedienungsanleitung UPS
- UPS Approx
- UPS Gembird
- UPS HP
- UPS Voltcraft
- UPS AEG
- UPS Siemens
- UPS IKEA
- UPS Dell
- UPS LC-Power
- UPS Tripp Lite
- UPS GYS
- UPS Adj
- UPS Block
- UPS Digitus
- UPS APC
- UPS Eaton
- UPS EnerGenie
- UPS Emerson
- UPS Furman
- UPS Riello
- UPS Puls Dimension
- UPS Avocent
- UPS Atlantis Land
- UPS Vanson
- UPS Phoenix Contact
- UPS Minuteman
- UPS V7
- UPS Equip
- UPS Salicru
- UPS SurgeX
- UPS Bxterra
- UPS Altronix
- UPS FSP
- UPS Ditek
- UPS PowerWalker
- UPS FSP/Fortron
- UPS East
- UPS Liebert
- UPS Murr Elektronik
- UPS Online USV
Neueste Bedienungsanleitung für -Kategorien-
13 Oktober 2024
13 Oktober 2024
13 Oktober 2024
13 Oktober 2024
13 Oktober 2024
13 Oktober 2024
13 Oktober 2024
13 Oktober 2024
11 Oktober 2024
9 Oktober 2024