CyberPower CRA60003 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr CyberPower CRA60003 (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Copyright © 2016 Cyber Power Systems, Inc. All rights reserved.
QUICK START GUIDE
Heavy-Duty Caster Kit
For Rack Enclosures
Heavy-Duty Caster Kit
For Rack Enclosures
K01-0000554-00
CRA60003
Parts List
Installation
Part
Heavy-Duty Caster
3” Leveling Feet
M6 Flange Nut
3” Stabilization Brackets
M8x25 Hex Bolt
M8x60 Hex Screw Bolt
M8 Flat Washer
M8 Spring Washer
M8 Hex Screw Nut
Qty
4
4
16
2
4
4
8
4
4
Install the casters before installing equipment into the rack enclosure. For
safety reasons, it is highly recommended to complete the caster installation
between two or more people.
WARNING
Install Heavy-Duty Casters and Leveling feet
Remove the original casters and leveling feet, if installed, from the rack. Using the
included hardware, as shown below, install the heavy-duty casters. M6 flange nuts
screw to riveted screws on the base of the rack. Then install the 3" leveling feet as
shown below.
Heavy-Duty Caster
M6 Flange Nut
3” Leveling Feet
For warranty and additional information, please visit: www.cyberpower.com.
Install Stabilization Brackets
To reduce the risk of injury and damage to the equipment, install the 3” stabilization
brackets to the front and rear frame. The brackets can be installed inside or outside of
the enclosure for multiple applications as shown below.
3” Stabilization Brackets
M8x25 Hex Bolt
Install on Pallet for Shipping
To ship a rack with heavy-duty casters installed, it is necessary to use the stabilization
brackets for safety. Load the rack on to a suitable pallet and install the stabilization
brackets on the outside of the front and rear frame as shown below.
NOTE: Always raise the leveling feet when moving the rack and lower them after positioning the rack
in it's final location on the shipping pallet.
CAUTION Do not ship the enclosure with any equipment installed.
M8x60 Hex Screw Bolt
3” Stabilization Brackets
M8 Flat Washer
M8 Spring Washer
M8 Hex Screw Nut
M8 Flat Washer


Produktspezifikationen

Marke: CyberPower
Kategorie: Nicht kategorisiert
Modell: CRA60003

Brauchst du Hilfe?

Wenn Sie Hilfe mit CyberPower CRA60003 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert CyberPower

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-