CyberPower CP1300EPFCLCD Bedienungsanleitung

CyberPower UPS CP1300EPFCLCD

Lesen Sie kostenlos die šŸ“– deutsche Bedienungsanleitung fĆ¼r CyberPower CP1300EPFCLCD (10 Seiten) in der Kategorie UPS. Dieser Bedienungsanleitung war fĆ¼r 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/10
K01-0000197-00
CP1300/1500EPFCLCD
Userā€™s Manual
2
IMPORTANT SAFETY INSTRUCTIONS
This manual contains important safety instructions. Please read and follow all instructions carefully
during installation and operation of the unit. Read this manual thoroughly before attempting to unpack,
install, or operate your UPS.
CAUTION! The UPS must be connected to a grounded AC power outlet with fuse or circuit breaker
protection. DO NOT plug the UPS into an outlet that is not grounded. If you need to -energize this de
equipment, turn oļ¬€ and unplug the UPS.
CAUTION! DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT! CyberPower Systems
does not sell products for life support or medical applications. DO NOT use in any circumstance that
would aļ¬€ect the operation safety of life support equipment, medical applications, or patient care. and
CAUTION! Hazardous live parts inside can be energized by the battery even when the AC input power
is disconnected.
CAUTION! To prevent the risk of ļ¬re or electric shock, install in a temperature and humidity controlled
indoor area, free of conductive contaminants. (Please see speciļ¬cations for acceptable temperature
and humidity range).
CAUTION! To reduce the risk of electric shock, do not remove the cover, except to service the battery.
There are no user serviceable parts inside, except for the battery.
CAUTION! To avoid electrical shock, turn oļ¬€ the unit and unplug it from the AC power source before
servicing the battery or installing a computer component.
CAUTION! DO NOT USE WITH OR NEAR AQUARIUMS! To reduce the risk of ļ¬re, do not use with or
near aquariums. Condensation from the aquarium can come in contact with metal electrical contacts
and cause the machine to short out.
INSTALLING YOUR UPS SYSTEM
UNPACKING
The box should contain the following:
(1) UPS Unit (2) Telephone Cable x 1; (3) USB Cable x (4 User Manual 1 5) Management x 1; 1; ) x ; (
software Disk 1; (6 Function Setup Guide 1 x ) x
OVERVIEW
The CP1300/1500EPFCLCD provides automatic voltage regulation for inconsistent utility power. The
CP1300/1500EPFCLCD features Joules of surge protection, and provides battery backup during 405
power outages. The CP1300/1500EPFCLCD ensures consistent power to your computer system and
its included software will automatically save your open ļ¬les and shut down your computer system
during a utility power loss.
SUPPORTS Active PFC POWER SUPPLIES
This CyberPower UPS system supports High Eļ¬ƒciency power supplies with Active Power Factor
Correction (Active PFC). Active PFC is used to improve the eļ¬ƒciency of power delivery. The current US
Energy StarĀ® Program Requirements for Computers (version 5.0) mandates Active PFC for all power
supplies over 100 watts. Additionally, programs such as 80 PlusĀ® are often used to identify high
eļ¬ƒciency power supplies with Active PFC.
HOW TO DETERMINE THE POWER REQUIREMENTS OF YOUR
EQUIPMENT
1.Make sure that the total Volt-Amp (VA) requirements of your computer, monitor, and peripheral
equipment does not exceed the 1300VA/ . 1500VA
2.Ensure that the equipment plugged into the battery power-supplied/surge outlets does
not exceed the UPS unit's rated capacity ( VA/ W for CP1300EPFCLCD, 1500VA/1300 780 900W for
3
CP1500EPFCLCD,). If the rated unit capacities are exceeded, an overload condition may occur and
cause the UPS unit to shut down the circuit breaker to trip. or
BASIC OPERATION
DESCRIPTION
1. Power Switch
Used as the master on/oļ¬€ switch
for equipment connected to the
battery power supplied outlets.
2. Power On Indicator
This LED is illuminated when the
utility power is normal and the UPS
outlets are providing power, free of
surges and spikes.
3. LCD Module Display
High resolution and intelligent LCD
display shows all the UPS
information with icons and
messages. For more information
please check the ā€œDefinitions for Illuminated LCD Indicatorsā€ section.
4. Display Switch
The switch can be used to select the LCD display contents including Input Voltage, Output Voltage
and Estimated Run Time. The toggle frequency is set to one time per 0.5 second. Press the switch
to roll down the function menu. Pressing the switch for 2 seconds will turn the LCD display on or off
while in AC/Utility power mode.
5. Silence Alarm Switch
The toggle frequency is set to one time per 0.5 second. Press the switch to roll up the function
menu. Holding the switch for more than 2 seconds will silence the buzzer.
6. Control Switch
Press the Control switch for 3 seconds in AC/Utility Power Mode to perform a Self Test of the
battery.
7. USB Power Ports
The USB Power ports provide 5V 1A power output.
8. mmunication Protection Ports RJ11/RJ45 Co
Communication protection ports will protect any standard modem, fax, telephone line, or network
cable from surge and spikes.
9. USB Port to PC
This port allows connection and communication from the USB port on the computer to the
UPS unit. The UPS communicates its status to the PowerPanel
Ā® Personal Edition software.
10. Serial Port to PC
This port allows connection and communicat from the DB-9 serial on the computer to the es
UPS unit. The UPS communicates its status to the PowerPanelĀ® Personal Edition software.
NOTE: Only one of these two ports can be used as communication and control of the UPS unit at
one time.
11. Battery and Surge Protected Outlets


Produktspezifikationen

Marke: CyberPower
Kategorie: UPS
Modell: CP1300EPFCLCD

Brauchst du Hilfe?

Wenn Sie Hilfe mit CyberPower CP1300EPFCLCD benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung UPS CyberPower

Bedienungsanleitung UPS

Neueste Bedienungsanleitung fĆ¼r -Kategorien-