Ctek MXS 3.8 Bedienungsanleitung

Ctek AutoladegerÀt MXS 3.8

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Ctek MXS 3.8 (6 Seiten) in der Kategorie AutoladegerĂ€t. Dieser Bedienungsanleitung war fĂŒr 36 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/6
EN
EN ‱ 3
CONGRATULATIONS
on the purchase of your new professional switch mode battery charger. This charger is
included in a series of professional chargers from CTEK SWEDEN AB and represents the
latest technology in battery charging.
CTEK COMFORT CONNECT eyelet M6–
CTEK COMFORT CONNECT
MAINS CABLE
CTEK COMFORT CONNECT clamp–
CHARGE CABLE
SUPPLY PLUG*
* Supply plugs may differ to suit your wall socket.
SMALL
BATTERY
PROGRAM
ERROR LAMP
NORMAL
BATTERY
PROGRAM
FULLY CHARGEDREADY TO USE
COLD
WEATHER
PROGRAM
POWER LAMP
HOW TO CHARGE
1. Connect the charger to the battery.
2. Connect the charger to the wall socket. The power lamp will indicate that the mains
cable is connected to the wall socket. The error lamp will indicate if the battery clamps
are incorrectly connected. The reverse polarity protection will ensure that the battery
or charger will not be damaged.
3.Press the MODE-button to select charging program.
4. Follow the 7-step display through the charging process.
The battery is ready to start the engine when STEP 4 is lit.
The battery is fully charged when STEP 6 is lit.
5. Stop charging at any time by disconnecting the mains cable from the wall socket.
MODE BUTTON
MANUAL
MODE
4 ‱ EN
BATTERY SIZE (Ah) TIME TO 80% CHARGED
2Ah 2h
8Ah 8h
20Ah 5h
60Ah 15h
80Ah 20h
READY TO USE
The table shows the estimated time for empty battery to 80% charge
CHARGING PROGRAMS
Settings are made by pressing the MODE-button. After about two seconds the charger
activates the selected program. The selected program will be restarted next time the
charger is connected.
The table explains the diïŹ€erent Charging Programs:
Program Battery
Size (Ah) Explanation Temp range
1.2–14Ah
Small battery program
14.4V/0.8A
Use for smaller batteries.
-20°C–+50°C
(-4ÂșF–122ÂșF)
14–130Ah
Normal battery program
14.4V/3.8A
Use for WET batteries, Ca/Ca,
MF, GEL batteries and many
AGM batteries.
+5°C–+50°C
(41ÂșF–122ÂșF)
14–130Ah
Cold weather program
14.7V/3.8A
Use for charging at low tempera-
tures and for power AGM batter-
ies like Optima and Odyssey.
-20°C–+5°C
(-4ÂșF–41ÂșF)
ERROR LAMP
If the error lamp is lit, check the following:
1. Is the chargers positive lead connected to the batteryÂŽs
positive pole?
2. Is the charger connected to a 12V battery?
3. Has charging been interrupted in STEP 1, 2 or 5?
Restart the charger by pressing the MODE-button. If charging is still
being interrupted, the battery...
STEP 1: ...is seriously sulphated and may need to be replaced.
STEP 2: ...can not accept charge and may need to be replaced.
STEP 5: ...can not keep charge and may need to be replaced.
POWER LAMP
If the power lamp is lit with a:
1. STEADY LIGHT
The mains cable is connected to the wall socket.
2. FLASHING LIGHT:
The charger has entered the energy save mode. This happens if the
charger isnÂŽt connected to the battery in 2 minutes.
EN
EN ‱ 5
VOLTAGE (V)CURRENT (A)
ANALYSE PULSE
DESULPHATION BULK ABSORPTIONSOFT START
15.8V
Increasing voltage
to 14.4V
0.8A
3.8A until 12.6V Increasing voltage
to 14.4V
3.8A
1 6
Limit: Max 20h Max 8h 3 minutes 10 days
Charge cycle restarts
if voltage drops
Charge cycle restarts
if voltage drops
15.8V
15.8V 3.8A until 12.6V
0.8A until 12.6V
Increasing voltage
to 14.7V
3.8A
14.4V
Declining current
14.4V
Declining current
14.7V
Declining current
Checks if voltage
drops to 12V
Checks if voltage
drops to 12V
Checks if voltage
drops to 12V
13.6V
3.8A
13.6V
0.8A
13.6V
3.8A
12.7V‒14.4V
3.8‒1.9A
12.7V‒14.4V
0.8‒0.3A
12.7V‒14.7V
3.8‒1.9A
Max 8h
2 3 4 5
FLOAT
7
CHARGING PROGRAM
STEP 1 dESULPHATION
Detects sulphated batteries. Pulsing current and voltage, removes sulphate from the
lead plates of the battery restoring the battery capacity.
STEP 2 SOFT START
Tests if the battery can accept charge. This step prevents that charging proceeds with
a defect battery.
STEP 3 BULK
Charging with maximum current until approximately 80% battery capacity.
STEP 4 ABSORPTION
Charging with declining current to maximize up to 100% battery capacity.
STEP 5 ANALYSE
Tests if the battery can hold charge. Batteries that can not hold charge may need to
be replaced.
STEP 6 FLOAT
Maintaining the battery voltage at maximum level by providing a constant voltage
charge.
STEP 7 PULSE
Maintaining the battery at 95–100% capacity. The charger monitors the battery volt-
age and gives a pulse when necessary to keep the battery fully charged.

Produktspezifikationen

Marke: Ctek
Kategorie: AutoladegerÀt
Modell: MXS 3.8

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ctek MXS 3.8 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung AutoladegerÀt Ctek

Ctek

Ctek MXS 3.8 Bedienungsanleitung

26 April 2023
Ctek

Ctek CTX Bedienungsanleitung

26 April 2023

Bedienungsanleitung AutoladegerÀt

Neueste Bedienungsanleitung fĂŒr -Kategorien-

Livoo

Livoo TEA221 Bedienungsanleitung

19 September 2024
Wallbox

Wallbox Pulsar Plus Socket Bedienungsanleitung

6 September 2024
ABL

ABL eMH3 Bedienungsanleitung

4 September 2024
ABL

ABL eMH1 Bedienungsanleitung

4 September 2024
Schneider

Schneider EVlink Home Smart Bedienungsanleitung

4 September 2024
Blaupunkt

Blaupunkt C3P32AT2 Bedienungsanleitung

4 September 2024
Blaupunkt

Blaupunkt C3P16AT2 Bedienungsanleitung

4 September 2024
Wissenergy

Wissenergy P60 Bedienungsanleitung

3 September 2024
PCE

PCE EV11 Bedienungsanleitung

2 September 2024
EcoFlow

EcoFlow PowerPulse Bedienungsanleitung

2 September 2024