CTA Digital AUT-UTHM Bedienungsanleitung

CTA Digital Nicht kategorisiert AUT-UTHM

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für CTA Digital AUT-UTHM (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 23 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

loosen completely and remove from top

PAD-UAFS

4.Base Assembly and Connecting the Metal Cover:

METAL CONNECTION

HEIGHT

ADJUSTMENT

KNOB

POLE

METAL

CROSS BASE X 2

CONNECTION SCREW BOLT,

WASHERS AND NUT

Pole Assembly and Pole Nut

Cross Base Sections (2)

Allen Key

1) Place the metal base pieces with the higher

piece on top of the cross base. Align the holes

at the bottom of the pole with the holes on the

cross base.

2) Insert a screw bolt with a washer into each

of 4 holes. Place another washer on the

underside of each screw bolts.

3) Grip the nut on the underside with one hand,

and use the other to tighten each screw with

Allen key. Repeat to tighten all four screw bolts.

4. Rotate the grip counter clockwise to

of pole.

5. Place the square metal cover over

the top of the pole and slide down to

stand base.

6. Place grip back over stand pole

and tighten.

for 9.7-10.1 Inch Tablets

Universal Height-Adjustable Gooseneck Floor Stand

9.7 10.1

Wheel

Screw Nut Cover

Spring

Washer

Metal

Base

3. Installing the Wheels

Wheel

Place a spring washer over the screw bolt

on the wheel.

Place the screw bolt from each wheel through the metal base, then place a nut cover

over the

top of each. Screw down clockwise by hand, then use wrench to tighten further.

Screw Nut Cover

Spring

Washer

Metal

Base

Instructions:

1.Assembly the Tablet Holder to the Gooseneck

Insert the Gooseneck into the ball

connection of tablet holder and then

fasten the connection by tightening the

screw rod.

2.Installing Your Tablet to the Holder

Package Contents:

Turn the star screw counter-clockwise to

loosen the grip of the Tablet Holder, mount the Tablet in the Tablet Holder and

adjust the grip by tightening the star screw clockwise.

Tablet 9.7-10.1 inch

Gooseneck

Metal

Connection

Y Screw

5. Connecting the Gooseneck Tablet Holder to the Pole and Adjusting

Screw gooseneck down onto metal connection

by turning clockwise.Turn the Y screw clockwise

to tighten the connection.

Note: if Y screw is already in, unscrew

before attaching gooseneck.

Loosen the ball connection of the tablet holder and flex the Gooseneck to

adjust the view angle.Turn plastic cover counter-clockwise and raise or lower

the pole todesired height.Turn clockwise again to lock it in place.

Multi Direction

Flexing

Produktspezifikationen

Marke:	CTA Digital
Kategorie:	Nicht kategorisiert
Modell:	AUT-UTHM
Gewicht:	453 g
Produktfarbe:	Schwarz
Material:	Metall
Typ:	Passive Halterung
Menge pro Packung:	1 Stück(e)
Vorgesehene Verwendung:	Auto
Kompatibilität:	iPad mini 5, iPad Gen 7 (2019), Ipad Pro 11 (2020 & 2021), iPad Pro 12.9 (2020 & 2021), Galaxy Tab S3 9.7”, Galaxy Tab A (2019) and more
Maximale Bildschirmgröße:	13 "
Drehungswinkel:	360 °
Ausrichtung:	Horizontal/Vertikal
Minimum Bildschirmgröße:	7 "
Handy-Gerätetyp:	Tablet/UMPC
Gerätemontagetyp:	Auto-Kopfstützenhalterung