Crystorama Belmont BEL-A8062-GE Bedienungsanleitung

Crystorama Erleichterung Belmont BEL-A8062-GE

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Crystorama Belmont BEL-A8062-GE (2 Seiten) in der Kategorie Erleichterung. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
WARNING: This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov
ASSEMBLY INSTRUCTION
®
MODEL #BEL-A8062-GE
9.5″
3.3″
11″
How to Install
1.Attach the xture to the outlet box.
2.Install the bulb onto the socket.
Sketch Map
1
11.2″
14.3″
Front view
Side view
1
Glass
Screw
Nut
3
Glass
2
2
L-shaped
metal strap
How to change glass
1.Take the bottom cage down by removing
the screws on the top of it.
2.Remove the L-shaped metal strap by
unscrewing the screws.
4.Put the new glass panel on and secure it
with the L-shaped metal strap and screws.
3.If necessary, smooth out the silicone glue along
the glass channel, prior to placing in the new
glass panel.
PART NUMBER
Part Number
Part Numbers
MODEL #BEL-A8062-GE
B.(1)Backplate;5″x6.6″x0.8″h;
XMO8061GEBKP6.6IN
C.(3)Cap nut
D.(1)Socket
E.(1)Glass frame; XMO8062GEGLAFRAME
B
C
D
E
61
2″
71
4″
83
4″
1
8″
F-Size F
F.(4)Glass;XMO8062GLA8.9IN
A
Green Ground
Screw
Anchor Screw
Mounting
Screw
Outlet box
screw
Wire Nut
A.Mounting Hardware
(3)Wire Nut
(1)Mounting Plate
(4)Anchor Screw
(2)Mounting Screw
(1)Green GroundScrew
(4)Outlet box screw
x4 x2 x3
Anchor Screw Mounting Screw Wire Nut
1.Put the mounting plate over the outlet box and mark the 4 points on the
wall surface at the center of 4 holes on the mounting plate.
2.Drill 4 holes at the marked points and insert the wall anchors.
3.Place the mounting plate over the outlet box and secure it with outlet
screws.Insert the wall anchor screws inside the wall anchors and tighten it.
For installation of mounting plate:


Produktspezifikationen

Marke: Crystorama
Kategorie: Erleichterung
Modell: Belmont BEL-A8062-GE

Brauchst du Hilfe?

Wenn Sie Hilfe mit Crystorama Belmont BEL-A8062-GE benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Erleichterung Crystorama

Bedienungsanleitung Erleichterung

Neueste Bedienungsanleitung für -Kategorien-