Crystal Quest CQE-CT-00145 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Crystal Quest CQE-CT-00145 (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
Crystal Quest® Classic Countertop Water Filter
INSTALLATION AND OPERATION GUIDE
ONLIN TY INFORMATION
com/warranty.html
Copyright 2020
Crystal Quest®
All rights reserved
MADE IN THE USA
2
CONNECTING DI
1. Remove aerator nstalled
(Fig 1).
2. Determin t: Outside
thread Fig 1); proceed
to S rrect adapter and
washer t. Tighten manually.
NOTE: Ada ich will t most faucets.
To create a ti y need to use the gasket from
your faucet’s aer dition to the washers included
with the adapters. I e adapters do not t, consult
your local plumbing or hardware supplier for assistance in
obtaining the correctly threaded adapter.
3. Screw the diverter valve onto the faucet, turning swivel
collar to tighten. Make certain that gasket (already installed
in diverter valve) is positioned securely between the
diverter valve and the faucet (or adapter). Rotate diverter
valve stem to desired position. Swivel collar may need to
be re-tightened. Place assembly conveniently next to sink.
4. Turn on water at faucet handle then turn on diverter
handle. This causes the water to ow through the lter. To
stop water ow to lter, turn off water at faucet handle,
then turn off diverter handle.
OPERATING SPECIFICATIONS:
Pressure Range: 20-60 psi (pounds per sq. in.)
Operating Temperature: 40-85°F (4.4-29.4°C)
Max Flow Rate: .5 gallons per minute
• Filter must be protected against freezing which can cause cracking of
• Please read all instructions and precautions before installing and us Water Filter.
• Filter life varies depending on lter type, usage, and water cond
• Do not install on hot water line.
• For cold water use only.
• The system has a limited service life. Changes in taste eing ltered indicate
that the unit should be replaced.
• The contaminants or other substances removed necessarily in your water. Ask
your local water municipality for a copy of t
• After prolonged periods of non-use (suc nded that the system be ushed
thoroughly. Let water run for 5-6 min
WARNING: Do not use with water nknown quality without adequate
disinfection before or after the s
Connecting diverter to
outside threads on faucet
Remove
Existing
Aerator
Swivel
Collar
Diverter valve
Handle
Faucet
adapters
(use size
as needed)
Gasket
Adapter
Swivel
Collar
Diverter valve
Handle
Remove
Existing
Aerator
Connecting diverter to
inside threads on faucet
Gasket
Adapter
Do not use non-Crystal Quest
replacement cartridges.
Do not use non-Crystal Quest
parts or modify/tamper with unit.
3
WATER APPEARANCE
WATER APPEARANCE
SPF WASHABL E-FILTRATION FILTER (SOLD SEPARATELY)
• WHITE water. When a new water lter is installed or after cleaning , the water may appear milky or white for a
while. It is harmless and will soon clear. White water is due to micro bubbles of air. On standing, the water will be
come clear as the bubbles move upwards. Water in some areas of the country has a hig vel of lime or calcium.
The Redox inside the unit changes these substances into harmless elements which r air and temperature.
• BLACK water. When a new water lter is installed or after cleaning, very ne b ar in the water.
This is normal and the particles are harmless carbon. Flushing the system e tap on
and off rapidly several times will help to clear this.
• COLORED water (often RED). Water in some areas may be high ough the lter.
When the water is left to stand, dissolved iron gives a red or s). In very severe
cases you should contact Crystal Quest ® for specialist ad ater will be removed
by the system.
Filtered and treated water tastes so much are also some who cannot detect
any change. Others nd that the treate ll soon become accustomed to the taste
of the ltered water. A major factor mposition in a particular area. There can be
considerable local differences in xample.
• Fish odor or sour taste w Run the water for ve minutes and shut off for
ve minutes. Do thre reas might have hard water. In very severe cases
you should contac ur water specialists at 1-800-934-0051.
• Chlorine ta ter is often masked by the presence of chlorine used in the
treatme tently reappears, the unit should be replaced. If after prolonged
stan ng objectionable taste occurs, ush the system by running water for
5 min
• Bad taste an needs replacing.
Small pre-lters designed to remove sediment and any other particulate
greater than 4 microns in size before the water is fed through to the
main countertop lter. The purpose is to reduce the burden on the
main lter unit and increase its effectiveness and lifespan. The pre-lter
consists of a stainless-steel screen lter which is sealed inside a small,
clear, removable housing with an O-ring. Maintenance and installation
are simple. The clear housing makes it easy to see when the lter needs
to be washed and the lter can be installed directly into a ¼” NPT
threaded receptacle. To wash, simply unscrew the clear housing, wash
the screen, and screw the housing back on. If maintained properly the
pre-lter should last indenitely. If you didn’t purchase a pre-lter with
your original order, please visit CrystalQuest.com or call 1-800-934-0051
to purchase.
OPERATION


Produktspezifikationen

Marke: Crystal Quest
Kategorie: Nicht kategorisiert
Modell: CQE-CT-00145

Brauchst du Hilfe?

Wenn Sie Hilfe mit Crystal Quest CQE-CT-00145 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Crystal Quest

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-