CRRCpro GF50I Bedienungsanleitung

CRRCpro Motor GF50I

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für CRRCpro GF50I (8 Seiten) in der Kategorie Motor. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
CRRCPRO ENGINE MANUAL
Thank you for use our engine, hoping that it can keep company with your
degree over a pleased time . In order to make it Performance Comfortable
and safety when you are using it , please detailed reading below explain
Concrete parameter:
Type : 2 cycle piston valve type gasoline engine for
airplane only
Displacement (cc) : 45cc
Bore x Stroke (mm): 1-43mm*31mm
Dry Weight (kg) : 1650g (Do not include the ignition)
Carburetor : Walbro(Diaphragm butterfly valve type)
Maximum Output : 4.2ps / 9500rmp
speed rang : 1600-7800rpm
Ignition : DC-CDI
1
Iis - lgnition : 6 V
Gasoline-Version : Pre-mixed Fuel, 25-40 (Gasoline):1
Lubrication Oil : 2 cycle engine oil
Propeller : 20x10 – 22x8 (
Two leafs prop)
Cooling System : Air Cooled
Waring!
1. This gasoline machine is just for the aviation model usage but the
development comes out of, please not to use in the other situation.
2. We are obligated to having products which make the defect to offer the
service.
3. Warning!This engine is not a toy! Serious injury and/or death can occur
from its misuse! Read and become familiar with this entire instruction
manual.learn the engine`s applications,limitations,and possible hazards.
For safe operation and to maintain your warranty you must:
1. Have a special designed engine test bench for your engine,if
don`t ,please mounted it on your model aircraft for breaking-in
2. Mount the engine correctly
3. Provide adequate air flow and cooling for the engine
4. Provide adequate air flow and cooling for the exhaust
5. Use an approved propeller and spinner
6. Drill the propeller correctly
7. Balance the propeller correctly
8. Tighten the propeller bolts correctly and check them regularly
9. Properly mount your ignition to avoid overheating
2
10. Use the correct battery and regulator (if applicable) for your ignition
11. Use the correct switch for your ignition
12. Use an appropriate fuel tank, plumbing lines, and installation
13. Use the appropriate fuel for break in and after break in (gas and oil)
14. Insure adequate filtering of your fuel
15. Maintain your engine properly, keeping it clean, etc.
16. Use a pre-flight check list before flying your model
17. Secure your model properly when starting
18. Not use your fingers or hand to start your model
19. Adjust your carburetor correctly
20. Not adjust your carburetor while the engine is running
21. Insure that your spark plug is in good condition and is secured
correctly
22. Insure that your ignition wires are not frayed and are protected
23. Insure that your ignition cap is securely mounted
24. Keep all people behind the line of the prop
25. Do not put anything (i.e., fingers, body parts, objects, et al) into the
rotating propeller
26. Keep children away. All spectators should be kept a safe distance away
from the running engine.
27. Wear proper apparel. Do not wear loose clothing, gloves, neckties,
jewelry, or neck straps for your radio which may get caught in the
moving propeller.
28. Always wear eye protection when starting the engine.
29. Do not operate this engine if you are under the influence of any drugs,
alcohol or medication that could affect your ability to use the
engine properly.
3


Produktspezifikationen

Marke: CRRCpro
Kategorie: Motor
Modell: GF50I

Brauchst du Hilfe?

Wenn Sie Hilfe mit CRRCpro GF50I benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten