Crivit 1-LD2950 Bedienungsanleitung

Crivit Tretmühle 1-LD2950

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Crivit 1-LD2950 (84 Seiten) in der Kategorie Tretmühle. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/84
User Manual
Nebula Capsule Max
ةيِبَ
رَعل
01 English
27 Deutsch
50 Español
73 Français
96 Italiano
119 日本語
142
EN EN
01 02
Table of Contents
Safety Instructions 02
What’s Included 05
Overview 05
Getting Started 10
Nebula App 12
Settings 13
Using the Nebula Capsule Max 16
Specications 21
Troubleshooting 22
Notice 23
Trademarks 26
Warranty 26
Safety Instructions
Read all instructions before you use this device. Do not make any
changes or create settings that are not described in this manual. If
physical injury, loss of data, or damage is caused by failure to follow
instructions, the warranty does not apply.
Setup
• To reduce the risk of re and / or electric shock, do not expose the
device to rain or moisture. Objectslled with liquids, such as vases,
should not be placed on this device.
• Do not place this device on soft surfaces such as tablecloths or
carpets, otherwise the device could be a re hazard.
• Do not place this device in areas susceptible to excessive dust and
dirt or near any appliance generating a strong magnetic eld.
• To prevent overheating, do not block or clog the ventilation
openings.
• Never place this device in a conned space. Always leave enough
space around this device for ventilation.
• Avoid overexposing this device to direct sunlight, heat, large
temperature fluctuations, and moisture. Avoid extreme
temperatures. The suitable operation and storage temperature for
this device and its accessories is 41°F to 95°F / 5°C to 35°C .
• When this device is running for a long period of time, the surface
may become hot. If this occurs, shut it down immediately and
unplug the charger. Resume operation after the device has cooled
down.
• Always handle this device with care. Avoid touching the lens.
• Do not allow children to handle the device without supervision.
• No not place heavy or sharp objects on this device.
• To avoid electric shock, do not disassemble the device.
• Only use attachments or accessories specied by the manufacturer.
• Avoid extreme vibrations as they may damage the internal
components.
EN EN
03 04
Power Supply
• Use only the provided power adapter.
• Power off the device before removing the power supply from the
socket.
• Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point where
they exit from this device.
• Unplug this device if there are lightning storms or when unused for
a long period of time.
• Where the power plug or an appliance coupler is used as the
disconnect device, the disconnect device shall remain readily
operable.
• Before you make or change any connections, ensure that all devices
are disconnected from the power outlet.
• Never touch the power cable or the power connector with wet
hands.
Hearing Safety
• To prevent hearing damage, do not listen for extended periods at
high volume. Set the volume to a safe level.
Charging
• The charger type is Q183 with output voltage / current of DC 9V/2A.
The charger should be installed near this product and should be
easily accessible.
• This charger is for indoor use only.
• When charging, place this device in an environment that has a
normal room temperature (ranges from 41°F to 77°F / 5°C to 25°C)
and good ventilation.
• Due to the enclosure material, this device must only be connected
to a USB 2.0 or higher.
Battery
• Do not replace the built-in battery yourself. Contact an authorized
service center to replace it.
• The remote control contains batteries which can be swallowed.
Keep the remote control out of the reach of children.
• Risk of explosion! Keep batteries away from heat, direct sunlight, or
re. Never dispose of batteries by burning.
• Remove the batteries when the remote control has not been used
for a long period of time.
• Replace the remote control batteries only with the same or an
equivalent type.
• Batteries contain chemical substances and they should be
disposed of properly.
• Charge this device regularly. Do not store this device with a
completely discharged battery.
Cleaning
• Use a soft, lint-free cloth. Never use liquid, gaseous, or easily
flammable cleansers to clean.
• Do not use any liquid cleaning agents to clean the lens to avoid
damaging the coating lm on the lens.
• Wipe the surfaces gently. Be careful that you do not scratch the
surface.
• Use lens cleaning paper to clean the lens.
Repairs
• Do not make any repairs to this device yourself. Only have your
device repaired by an authorized service center.
• Improper maintenance can result in injuries to persons or damage
to this device.
• Refer all servicing to qualied service personnel.
Caution
• Possibly hazardous optical radiation emitted from this device.
• Do not stare directly at the operating beam. The bright light may
damage your eyes.

Produktspezifikationen

Marke: Crivit
Kategorie: Tretmühle
Modell: 1-LD2950

Brauchst du Hilfe?

Wenn Sie Hilfe mit Crivit 1-LD2950 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Tretmühle Crivit

Crivit

Crivit 1-LD2950 Bedienungsanleitung

6 Juli 2024

Bedienungsanleitung Tretmühle

Neueste Bedienungsanleitung für -Kategorien-

DC Athletics

DC Athletics Trail Blazer Bedienungsanleitung

4 Oktober 2024
BH Fitness

BH Fitness LK500Ti Bedienungsanleitung

11 September 2024
Precor

Precor TRM 700 Bedienungsanleitung

6 September 2024
Precor

Precor TRM 600 Bedienungsanleitung

6 September 2024
Precor

Precor TRM 800 Bedienungsanleitung

6 September 2024
Christopeit

Christopeit Walking Pad 4.2 Bedienungsanleitung

6 September 2024
Prixton

Prixton Run Fit Compact RF110 Bedienungsanleitung

6 September 2024
Taurus

Taurus ST10.5 Bedienungsanleitung

6 September 2024
Inspire

Inspire Tread 3 Bedienungsanleitung

5 September 2024
Bodycraft

Bodycraft T1000 Bedienungsanleitung

5 September 2024