Crestron HZA-CONV-THSTAT-2WIRE Bedienungsanleitung

Crestron Thermostat HZA-CONV-THSTAT-2WIRE

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Crestron HZA-CONV-THSTAT-2WIRE (5 Seiten) in der Kategorie Thermostat. Dieser Bedienungsanleitung war für 22 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
The Crestron® HZA-CONV-THSTAT-2WIRE is an adapter for the
Horizon® Wireless Thermostat (sold separately) that HZ-THSTAT
eliminates the need to add a common wire in retrofit applications. The
adapter allows the HZ-THSTAT to power itself and perform an HVAC
call, with as few as two wires, without stealing power from the HVAC
call relay connections. The adapter can also be used to add an additional
wire for a system upgrade if a common wire is already present.
The HZA-CONV-THSTAT-2WIRE is installed near the HVAC equipment
and can be mounted with either mounting screws (included) or double-
sided tape (included). HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIREHZA-CONV-THSTAT-2WIRE
In the
In the
In the
In the In the Box
Box
Box
BoxBox
1HZA-CONV-THSTAT-2WIRE, Common Wire Adapter for
HZ-THSTAT
 
Additional Items
Additional Items
Additional Items
Additional Items Additional Items
2 Screw, 6-20 BSD, #2 PT, Self Drill, 1/2 in. Hex, Steel
(2056229)
2 Tape, 1.5 in. x 0.75 in., Double Sided (2048130)
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIREHZA-CONV-THSTAT-2WIRE QuickStart
Common
Common
Common
CommonCommon Wire
Wire
Wire
WireWireAdapter
Adapter
Adapter
AdapterAdapter for
for
for
forforHZ-THSTAT
HZ-THSTAT
HZ-THSTAT
HZ-THSTATHZ-THSTAT
1
1
1
11
Install the
Install the
Install the
Install the Install the Device
Device
Device
DeviceDevice
Install the HZA-CONV-THSTAT-2WIRE near the HVAC equipment. It can
be mounted to most flat surfaces with self-drill mounting screws
(included) or double-sided tape (included).
Mounting with
Mounting with
Mounting with
Mounting with Mounting with Double-Sided Tape
Double-Sided Tape
Double-Sided Tape
Double-Sided Tape Double-Sided Tape
Two pieces of double-sided tape are provided. The illustration below
depicts the recommended placement for the double-sided tape on the
HZA-CONV-THSTAT-2WIRE. Make sure the HZA-CONV-THSTAT-2WIRE
and the mounting surface are both clean before attaching the tape.
Mounting with
Mounting with
Mounting with
Mounting with Mounting with Included Screws
Included Screws
Included Screws
Included ScrewsIncluded Screws
Before mounting the HZA-CONV-THSTAT-2WIRE, prepare the
mounting surface. A power drill is required for the installation.
1. Place the HZA-CONV-THSTAT-2WIRE on the mounting surface.
2. Make a center mark through both of the HZA-CONV-THSTAT-2WIRE
mounting holes.
3. Partially screw one of the included screws to the mounting surface.
4. Align the HZA-CONV-THSTAT-2WIRE with the screw, and continue
tightening the screw.
2
2
2
22
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIREHZA-CONV-THSTAT-2WIRE QuickStart
Common
Common
Common
CommonCommon Wire
Wire
Wire
WireWire Adapter
Adapter
Adapter
AdapterAdapter for
for
for
forfor HZ-THSTAT
HZ-THSTAT
HZ-THSTAT
HZ-THSTATHZ-THSTAT
5. With one side fastened, use the second included screw to secure the
other side of the HZA-CONV-THSTAT-2WIRE to the mounting
surface. Wire the
Wire the
Wire the
Wire the Wire the Device
Device
Device
DeviceDevice
Turn the HVAC system power off, and make the necessary connections
as called out in the illustrations that follow. Apply power after all
connections have been made.
NOTES:
NOTES:
NOTES:
NOTES:NOTES:
 Always wire the HZA-CONV-THSTAT-2WIRE to the R/RC and C lconnections on the HZ-THSTAT.
Keep the R CONNECTIONS switch set to R/RC ONLY.
 The W/Y connection on the HZA-CONV-THSTAT-2WIRE always lreplaces the Y connection when there is a Y connection for the
system type selected.
For Heat only systems, the W/Y connection will replace the W
connection.
For Radiant Floor only systems, the W/Y connection will replace the
W2 connection.
3
3
3
33
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIREHZA-CONV-THSTAT-2WIRE QuickStart
Common
Common
Common
CommonCommon Wire
Wire
Wire
WireWireAdapter
Adapter
Adapter
AdapterAdapter for
for
for
forforHZ-THSTAT
HZ-THSTAT
HZ-THSTAT
HZ-THSTATHZ-THSTAT


Produktspezifikationen

Marke: Crestron
Kategorie: Thermostat
Modell: HZA-CONV-THSTAT-2WIRE

Brauchst du Hilfe?

Wenn Sie Hilfe mit Crestron HZA-CONV-THSTAT-2WIRE benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Thermostat Crestron

Bedienungsanleitung Thermostat

Neueste Bedienungsanleitung für -Kategorien-