Crestron FTA-CP-RJ45-102 Bedienungsanleitung

Crestron Nicht kategorisiert FTA-CP-RJ45-102

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Crestron FTA-CP-RJ45-102 (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Crestron FTA-CP Series
Connector Plates
Installation Guide
INSTALLATION
To install an FTA-CP Series Connector Plate in a
Crestron® FT Series FlipTop™, use the following
procedure:
1. Remove the two #06-32 x 1/4" screws holding the
original, blank plate in place.
Connector Plate Screw Locations
(FT-600 Shown)
2. Remove the original, blank plate.
3. Place the new connector plate in position.
4. Secure the new connector plate using the two
screws removed in step 1.
Crestron Electronics, Inc. Installation Guide
15 Volvo Drive DOC. 7613A
Rockleigh, NJ 07647 (2038834)
Tel: 888.CRESTRON 11.13
Fax: 201.767.7576 Specifications subject to
www.crestron.com change without notice.
Further Inquiries
To locate specific information or resolve questions after
reviewing this guide, contact Crestron's True Blue Support at
1-888-CRESTRON [1-888-273-7876] or, for assistance within
a particular geographic region, refer to the listing of Crestron
worldwide offices at www.crestron.com/offices.
To post a question about Crestron products, log onto
Crestron’s Online Help at www.crestron.com/onlinehelp.
First-time users must establish a user account to fully benefit
from all available features.
Future Updates
As Crestron improves functions, adds new features, and
extends the capabilities of the FTA-CP Series, additional
information may be made available as manual updates. These
updates are solely electronic and serve as intermediary
supplements prior to the release of a complete technical
documentation revision.
Check the Crestron website periodically for manual update
availability and its relevance. Updates are identified as an
“Addendum” in the Download column.
06-32 x 1/4” Screws (2)
The specific patents that cover Crestron products are listed at patents.crestron.com.
Crestron, the Crestron logo, and FlipTop are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United
States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to
either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names
of others. Crestron is not responsible for errors in typography or photography.
This document was written by the Technical Publications department at Crestron.
©2013 Crestron Electronics, Inc.
RETURN AND WARRANTY POLICIES
Merchandise Returns / Repair Service
1. No merchandise may be returned for credit, exchange or service without prior authorization from Crestron. To obtain warranty
service for Crestron products, contact an authorized Crestron dealer. Only authorized Crestron dealers may contact the factory and
request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone
number of contact person, RMA number and return address.
2. Products may be returned for credit, exchange or service with a Crestron Return Merchandise Authorization (RMA) number.
Authorized returns must be shipped freight prepaid to Crestron, 6 Volvo Drive, Rockleigh, N.J. or its authorized subsidiaries, with
RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be
subject to refusal. Crestron reserves the right in its sole and absolute discretion to charge a 15% restocking fee plus shipping costs
on any products returned with an RMA.
3. Return freight charges following repair of items under warranty shall be paid by Crestron, shipping by standard ground carrier. In the
event repairs are found to be non-warranty, return freight costs shall be paid by the purchaser.
Crestron Limited Warranty
Crestron Electronics, Inc. warrants its products to be free from manufacturing defects in materials and workmanship under normal use for a
period of three (3) years from the date of purchase from Crestron, with the following exceptions: disk drives and any other moving or
rotating mechanical parts, pan/tilt heads and power supplies are covered for a period of one (1) year; touch screen display and overlay
components are covered for 90 days; batteries and incandescent lamps are not covered.
This warranty extends to products purchased directly from Crestron or an authorized Crestron dealer. Purchasers should inquire of the
dealer regarding the nature and extent of the dealer's warranty, if any.
Crestron shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it
was intended or if it has been subjected to misuse, accidental damage, modification or improper installation procedures. Furthermore, this
warranty does not cover any product that has had the serial number altered, defaced or removed.
This warranty shall be the sole and exclusive remedy to the original purchaser. In no event shall Crestron be liable for incidental or
consequential damages of any kind (property or economic damages inclusive) arising from the sale or use of this equipment. Crestron is
not liable for any claim made by a third party or made by the purchaser for a third party.
Crestron shall, at its option, repair or replace any product found defective, without charge for parts or labor. Repaired or replaced
equipment and parts supplied under this warranty shall be covered only by the unexpired portion of the warranty.
Except as expressly set forth in this warranty, Crestron makes no other warranties, expressed or implied, nor authorizes any other party to
offer any warranty, including any implied warranties of merchantability or fitness for a particular purpose. Any implied warranties that may
be imposed by law are limited to the terms of this limited warranty. This warranty statement supersedes all previous warranties.


Produktspezifikationen

Marke: Crestron
Kategorie: Nicht kategorisiert
Modell: FTA-CP-RJ45-102

Brauchst du Hilfe?

Wenn Sie Hilfe mit Crestron FTA-CP-RJ45-102 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Crestron

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-