Cosatto Shuffle Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Cosatto Shuffle (25 Seiten) in der Kategorie Kinderwagen. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/25
...www.cosatto.com
SHUFFLE
Cosatto Ltd, Bentinck Mill, Bentinck Street, Farnworth, Bolton, BL4 7EP, England
Tel: +44(0)871 977 3900 Fax: +44(0)871 977 3910 Email: enquiry@cosatto.com
r
e
s
p
o
n
s
i
v
e
,
v
i
s
i
o
n
a
r
y
,
b
o
l
d
TANDEM STROLLER
slimline
swiveller
IMPORTANT: RETAIN FOR FUTURE
REFERENCE. READ CAREFULLY.
YOUR CHILDS SAFETY MAY BE
AFFECTED IF YOU DO NOT
FOLLOW THESE INSTRUCTIONS
GB
Thank you for choosing a Cosatto product. Please take a little time to read the important safety notes
detailed below. This will ensure many years of happy, safe use.
user guide
safety: take note
WARNING: A CHILD’S SAFETY IS YOUR RESPONSIBILITY
WARNING: Never leave your child unattended.
WARNING: Ensure that all the locking devices are engaged before use.
WARNING: To avoid injury ensure that your child is kept away when
unfolding and folding this product.
WARNING: Do not let your child play with this product.
WARNING: Always use the restraint system.
WARNING:
Any load attached to the handle affects the stability of the pushchair.
WARNING: This product is not suitable for running or skating.
WARNING: The front seat of the pushchair is not suitable for children under
6 months.
•
This pushchair is designed to carry two children, each with a maximum weight of 15 kg. The rear
seat can be used from birth, while the front seat is only suitable from 6 months.
•
Recline the seat to the most reclined position for new born babies until they can sit up unaided.
•
Brake should be engaged when placing and removing the children.
•
Children should be harnessed in at all times and never left unattended. The child should be clear
of moving parts while making adjustments. This vehicle requires regular maintenance by the user.
•
Do not use replacement parts or accessories other than those approved by Cosatto as they may
render the pushchair unsafe.
•
Overloading, incorrect folding, and the use of non-approved accessories or spare parts may
damage or break this pushchair and could render the product unsafe.
•
Any additional load attached to the handle and/or on the back of the backrest and/or on the
sides of the vehicle will affect the stability of the vehicle.
•
A basket is provided for the carriage of goods, evenly distributed, up to a maximum weight of 2kg.
•
Never leave raincovers on indoors, in a hot atmosphere or near a heat source as the baby could
overheat.
•
Ensure all users are familiar with the products operation. It should always open and fold easy. If it
does not, do not force the mechanism - stop and read the instructions.
•
Do not use your pushchair in a manner for which it is not designed.
•
Ensure your child wears a correctly fitted and adjusted harness at all times. D-rings are provided
on the existing harness for the attachment of a separate safety harness approved to BS EN 13210
should this be required.
•
Do not allow your child to climb unassisted into, play with or hang onto your pushchair.
•
Do not use a platform with this pushchair as it may render the pushchair unsafe.
•
Always apply the brakes when the pushchair is stationary. Hold on to your pushchair when close
to moving road vehicles or trains. Even with the brake on the draught from the vehicle may move
the pushchair.
•
Exercise caution when mounting or dismounting a kerb. Remove your child and fold the push
chair when ascending or descending stairs or escalators.
•
Ensure the folded pushchair is stored away from children so that it does not fall and cause injury.
•
Never carry a third child on your pushchair.
•
This product complies with BS EN 1888:2012.
operation
1 - list of parts
Your pushchair is supplied in one carton and contains:
1. Pushchair (basket attached) x 1
2. Front wheels x 2
3. Rear Hood x 1
2 - opening pushchair
In order to unfold your pushchair first release the folding lock (a). Next hold the pushchair firmly by
both handles and with a foot placed behind the rear wheels (b) pull the handles upwards towards
you (c). When nearly all the way up place your foot on the foot pedal (d) and continue pulling the
handles till the pushchair is fully erect.
WARNING: Ensure that all locking devices are engaged before use.
3 - attaching the front wheels
Fit a front wheel by placing the front leg of the pushchair frame into the hole at the top of the
wheel assembly. Push down hard on the leg (a) until it clicks into place. Check that the leg is
protruding through the bottom of the wheel assembly (b) and is locked in place.
Repeat this process for the remaining front wheel.
4 - using the front wheel swivel lock
To allow the wheels to swivel, lift the locking lever as shown (a). To lock the wheels into position
push the locking lever down (b) with the wheels in any position and run the pushchair until you
hear each wheel ‘click’ as they lock in position.
5 - using the brake
To apply the brake, press either lever down firmly with your foot (a). Test the brake is engaged
correctly by trying to push the pushchair forwards for a short distance. To release the brake, raise
either of the levers (b).
NOTE: Always apply brake before loading or unloading a child from the pushchair.
6 - attaching the front hood
Before attaching the hood fit the elastic straps on the back of the seat around the arms of the
hood as shown (a).
To attach the front hood, insert the hood clips into the slots on the pushchair arms (b).
Holding the hood clips at a slight angle insert the front of each hood clip into the slot on the
pushchair arm, then push down and forward to secure (c).
To detach the front hood: press down on the release buttons (d) then pull the hood clips
backwards (e).
WARNING: Ensure the hood is fitted securely before use.
7 - attaching the rear hood
To attach the rear hood fix the hood clips onto the pushchair frame at the fixing point (a). Holding
the hood clips, twist them slightly so as to allow ease of attachment to the pushchair frame. Slip
the hood clips over the fixing point then push on and twist into place.
To detach, twist the hood clips slightly inwards towards the centre of the pushchair then remove
from the chassis (b).
4. Front Hood x 1
5. Babynest x 1
6. Headhugger x 1
7. Footmuff x 1
8. Raincover x 1


Produktspezifikationen

Marke: Cosatto
Kategorie: Kinderwagen
Modell: Shuffle

Brauchst du Hilfe?

Wenn Sie Hilfe mit Cosatto Shuffle benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Kinderwagen Cosatto

Bedienungsanleitung Kinderwagen

Neueste Bedienungsanleitung für -Kategorien-