Control4 C4-T4T10 Bedienungsanleitung

Control4 Tablette C4-T4T10

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Control4 C4-T4T10 (6 Seiten) in der Kategorie Tablette. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
11
Supported models
• C4-T4T8 8" Tabletop Touchscreen (black or white)
• C4-T4T10 10" Tabletop Touchscreen (black or white)
Introduction
The Control4® T4 Series Tabletop Touchscreens oer complete
system control in an elegant, compact, and portable design. The
touchscreens are equipped with a full capacitive screen, audio
and video Intercom (with the built-in camera) using SIP, and
more.
This touchscreen can be located anywhere, and the convenient
recharging station enables it to be used as either a tabletop or
portable interface. The touchscreen uses an AC power adapter
for power and Wi-Fi for network connectivity.
Note: 802.11b is not recommended for video intercom.
We recommend using Wireless-N. See “Specifications”
for more information.
Box contents
• Tabletop Touchscreen
• Recharging station
• Recharging station power cord
Accessories available for purchase
• Tabletop Permanent Mount Kit (C4-T4PMNT)
• T4 Touchscreen Tabletop 8" Base (C4-T4TBS8)
• T4 Touchscreen Tabletop 10" Base (C4-T4TBS10)
Warnings
Caution! Do not place the touchscreen near sources of
heat or expose to direct sunlight for an extended time.
Avertissement ! Ne placez pas l’unité près des sources
de chaleur ou exposition pour diriger la lumière du soleil
pendant une pĂŠriode prolongĂŠe.
Caution! This product generates heat. The room must
have adequate ventilation or the ability to dissipate heat
eectively.
Avertissement ! Ce produit produit de la chaleur. La salle
doit avoir Ă  ventilation proportionnĂŠe ou la capacitĂŠ
d’absorber la chaleur ecacement.
Caution! Use this product only in dry locations.
Avertissement ! Employez ce produit seulement dans
des endroits secs.
Caution! Do not use pens or sharp objects to navigate
or make selections on the touchscreen. To select an item
or scroll through a list, use your ngertip.
Avertissement ! N’employez pas les stylos ou les objets
pointus pour diriger ou pour faire des choix sur l’écran.
Pour choisir un article ou un rouleau par une liste,
employez votre bout du doigt.
Caution! Improper use or installation can cause
DAMAGE OF PROPERTY.
Avertissement ! L’utilisation ou l’installation inexacte
peut causer DAMAGE DE PROPRIÉTÉ.
Important! Using this product in a manner other than
outlined in this document voids your warranty. Further,
Control4 is NOT liable for any damage incurred with the
misuse of this product. See “Warranty.”
T4 Series Tabletop Touchscreens
Installation Guide
2
Specications and requirements
Specications
Model Numbers C4-T4T10-BL, C4-T4T10-WH
C4-T4T8-BL, C4-T4T8-WH
Screen
Resolution: 1920 × 1200
Capacitive touch
Camera: 720p
Wireless network
802.11b/g/n 2.4 GHz
802.11a/n/ac 5 GHz
Security: WEP, WPA/WPA2 PSK, 802.1x EAP, PEAP
Notes: (1) While technically the touchscreen can use 802.11b,
802.11b is not supported. (2) 802.11n is recommended for
best performance. Even with 802.11n, broadcasting to
several devices will degrade Video Intercom response time
and images. Broadcasting to additional devices will further
degrade performance. See “Wireless Network Limitations.”
Power supply
100-240V AC, 50/60 Hz
International adapters included
Charging base connections: 5V DC power
Dimensions
(W×H×D)
8" Touchscreen: 200 × 144 × 23 mm (7.9 × 5.7 × 0.9")
8" Base: 106 × 79 × 56 mm (4.17 × 3.11 × 2.21")
10" Touchscreen: 245 × 172 × 23 mm (9.65 × 6.77 × 0.9")
10" Base: 115 × 102 × 66 mm (4.53 × 4.02 × 2.60")
Weight
8" Touchscreen: 1.05 lb (0.47 kg)
8" Charging base: 1.4 lb (0.64 kg)
10" Touchscreen: 1.35 lb (0.60 kg)
10" Charging base: 1.05 lb (0.46 kg)
Operating
temperature
0 to 40 ˚C (32 to 104 ˚F)
Storage
temperature
-20 to 70 ˚C (-4 to 158 ˚F)
Requirements
• A controller fully installed and configured with Control4
OS3.2.1 or newer.
• A wireless network (IEEE 802.11b/g/n) must be installed and
available with a wireless access point (WAP). Security can be
WEP, WPA/WPA2 PSK, 801.1x EAP, or PEAP.
• For AC power, you must have access to an AC power outlet
(AC power adapter included).
Views
Front
E
A B C
D
A Camera
B Camera LED
C Light sensor
D Stereo microphones
E 8 or 10" diagonal, capacitive 1920 × 1200 display"
Back (with charging station)
H
K
F G
I
J
L
F Power button. Press to enter or exit battery saving mode,
press and hold to turn off or restart, or press and hold for 10
seconds to power off.
G Reset pinhole. Press to reset, or press and hold to reset and
restore factory defaults.
H Docking connector
I Volume buttons
J Speakers
K Charging station base
L 5V DC power connector
3
Touchscreen placement
Place the touchscreen’s charging station on any level surface
near a power outlet. You can also use PoE to supply power to an
active PoE splitter’s DC jack. For more information on mounting
the touchscreen, see “Portable” under “Mounting options” below.
Note: Consider the angle of the touchscreen’s camera
and the sitting or standing position of the people who
will use it while it’s on the charging station.
Connect power and Wi-Fi
The touchscreen uses a Wi-Fi network connection, so it can be
positioned anywhere in the home with a strong WiFi signal and
access to a power outlet.
To connect power and Wi-Fi:
1 Place the touchscreen’s charging station near a power outlet.
2 Connect the AC power adaptor to a power outlet and the
charging station.
3 Make sure you have Wi-Fi working in the home.
If a home requires a large number of Wi-Fi video intercom
devices, ensure that you have a robust Wi-Fi network
(possibly consisting of multiple access points).
Connection notes: This device supports 802.11b/g/n/
ac. We recommend Wireless-N or Wireless-AC for best
video intercom performance.
Wireless network limitations: Many Wi-Fi access points
handle Multicasts (Wi-Fi simultaneously sent to multiple
devices, for example, when the touchscreen broadcasts
video to all stations) by slowing down transmission
speed to the 1 Mb basic rate. This can cause overall
Wi-Fi congestion in the Wi-Fi network during the
broadcast. Video Intercom response times and images
may degrade at each device.
Connect to Wi-Fi
To set up Wi-Fi on the touchscreen:
1 After the touchscreen starts up, tap Network. The network
conguration page opens.
2 Under , make sure Wi-Fi is enabled, then tap the Wi-Fi Wi-Fi
eld to open a list of available networks.
3 Tap the network name you want to connect to.
4 Tap the eld, then use the on-screen keyboard to Password
type the password (if required).
Note: If you need to enter a static IP address, follow the
instructions under “To set a wireless static IP address”
below before proceeding.
5 Tap .Connect
If you don’t see the network you want:
1 Tap , then tap the eld and type the SSID + Network SSID
(name) of the network by using the on-screen keyboard.
2 Tap the eld, then select the type of security to use.Security
3 Tap the Password eld, then use the on-screen keyboard to
type the password (if required).
Note: If you need to enter a static IP address, follow the
instructions under “To set a wireless static IP address”
below before proceeding.
4 Tap . The new network is added to the bottom of the Save
network list.
To set a wireless static IP address:
1 Show advanced optionsScroll down and tap .
2 Tap , then tap .IPsettings Static
3 Select each box one at a time and use the on-screen
keyboard to type the:
• IP address
• Gateway
• Network prefix length
• (preferred)DNS 1
• (alternate)DNS 2
Add and congure in Composer Pro
After the touchscreen is installed and appears on the home
network, use Composer Pro to add it to the Control4 system and
congure it.
Use the Composer Pro System Design Connections and views to
add and congure this device.
To add and congure a T4 touchscreen to a project:
1 T4 Tabletop TouchscreenAdd the driver to your project.
2 Identify the device to the project, select the touchscreen in
Composer Pro’s > Connections Network view, click , Identify
then tap on the touchscreen. Identify
3 To congure the properties, select the touchscreen in the
System Design view, then view and change the properties in
the pane as needed.Properties
Properties include:
• Network Connection—Reports the touchscreen’s current
network connection type.
• —Click the arrows or type numbers to set the Back Light
light level, then click .Set
Advanced properties include:
• —Allows you to enable or disable the Enable Camera
camera.
Intercom properties (nested under the touchscreen):
• Appearance—Select to hide the touchscreen from
appearing in Navigators as an available device.
• —Select the modes you want this touchscreen to Behavior
support.
• Audio Control—Select the volume of individual audio
settings.


Produktspezifikationen

Marke: Control4
Kategorie: Tablette
Modell: C4-T4T10

Brauchst du Hilfe?

Wenn Sie Hilfe mit Control4 C4-T4T10 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Tablette Control4

Bedienungsanleitung Tablette

Neueste Bedienungsanleitung fĂźr -Kategorien-