Comtrend WR-5881 Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Comtrend WR-5881 (165 Seiten) in der Kategorie Router. Dieser Bedienungsanleitung war für 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/165
1
Wireless-N Broadband Router
User’s Manual
Version A1.0, June 20, 2012
2
Preface
This manual provides information related to the installation and operation of this
device. The individual reading this manual is presumed to have a basic
understanding of telecommunications terminology and concepts.
If you find the product to be inoperable or malfunctioning, please contact technical
support for immediate service by email at homesupport@comtrend.com
For product updates, manual revisions, or software upgrades, please visit our website
at http://www.comtrend.com
3
Important Safety Instructions
With reference to unpacking, installation, use, and maintenance of your electronic
device, the following basic guidelines are recommended:
Do not use or install this product near water, to avoid fire or shock hazard. For
example, near a bathtub, kitchen sink or laundry tub, or near a swimming pool.
Also, do not expose the equipment to rain or damp areas (e.g. a wet basement).
Do not connect the power supply cord on elevated surfaces. Allow it to lie
freely. There should be no obstructions in its path and no heavy items should be
placed on the cord. In addition, do not walk on, step on, or mistreat the cord.
Use only the power cord and adapter that are shipped with this device.
To safeguard the equipment against overheating, make sure that all openings in
the unit that offer exposure to air are not blocked.
WARNING
Disconnect the power line from the device before servicing.
Power supply specifications are clearly stated in 4 1 Hardware Specification-
4
Copyright
Copyright© 2012 Comtrend Corporation. All rights reserved. The information
contained herein is proprietary to Comtrend Corporation. No part of this document
may be translated, transcribed, reproduced, in any form, or by any means without the
prior written consent of Comtrend Corporation.
NOTE: This document is subject to change without notice.
Protect Our Environment
This symbol indicates that when the equipment has reached the end of
its useful life, it must be taken to a recycling centre and processed
separate from domestic waste.
The cardboard box, the plastic contained in the packaging, and the parts that make up this
router can be recycled in accordance with regionally established regulations. Never
dispose of this electronic equipment along with your household waste; you may be subject
to penalties or sanctions under the law. Instead, please be responsible and ask for disposal
instructions from your local government.
5
Table of Contents
Chapter I: Product Information ................................................................................................. 9
1- 9 1 Introduction.....................................................................................................................
1- 2 System Requirements ................................................................................................... 11
1-3 Package Contents .......................................................................................................... 12
1-4 Get familiar with your new Wireless-n Broadband Router ........................................... 13
Chapter II: System and Network Setup ................................................................................... 15
2- 1 Installation..................................................................................................................... 15
2- 2 Connecting to the wireless broadband router by web browser ................................... 17
2-2- 1 Windows 2000 IP address setup:........................................................................... 18
2-2-2 Windows XP IP address setup: ............................................................................... 20
2-2- 3 Windows Vista/ Windows 7 IP address setup:....................................................... 22
2-2- 4 Router IP address lookup ....................................................................................... 24
2- 3 Using ‘Quick Setup’ ....................................................................................................... 28
2-3- 1 Setup procedure for ‘Cable Modem’ (Dynamic IP): ............................................... 31
2-3-2 Setup procedure for ‘Fixed-IP xDSL’:...................................................................... 32
2-3- 3 Setup procedure for ‘PPPoE xDSL’: ........................................................................ 34
2-3-4 Setup procedure for ‘PPTP xDSL’: .......................................................................... 36
2-3- 5 Setup procedure for ‘L2TP xDSL’:........................................................................... 39
2- 4 Basic Setup .................................................................................................................... 42
2-4-1 Time zone and time auto- synchronization ............................................................ 42
2-4-2 Change management password............................................................................. 44
6
2-4-3 Remote Management ............................................................................................ 47
2- 5 Setup Internet Connection (WAN Setup)...................................................................... 49
2-5- 1 Setup procedure for ‘Dynamic IP’:......................................................................... 51
2-5-2 Setup procedure for ‘Static IP’: .............................................................................. 53
2-5- 3 Setup procedure for ‘PPPoE’:................................................................................. 54
2-5- 4 Setup procedure for ‘PPTP’:................................................................................... 57
2-5- 5 Setup procedure for ‘L2TP’: ................................................................................... 60
2-5- 6 Setup procedure for ‘DNS’: .................................................................................... 62
2-5- 7 Setup procedure for ‘DDNS’:.................................................................................. 64
2-5- 8 Setup procedure for ‘WISP’: .................................................................................. 66
2-5- 9 Setup procedure for ‘IPv6’: .................................................................................... 69
2- 6 Wired LAN Configurations............................................................................................. 71
2-6- 1 LAN IP section: ....................................................................................................... 73
2-6- 2 DHCP Server: .......................................................................................................... 74
2-6-3 Static DHCP Leases Table: ...................................................................................... 76
2-7 Wireless LAN Configurations ......................................................................................... 79
2-7-1 Basic Wireless Settings ........................................................................................... 81
2.7.1.1 Setup procedure for ‘Access Point’: .................................................................... 83
2.7.1.2 Setup procedure for ‘Station- Infrastructure’: ..................................................... 86
2.7.1.3 Setup procedure for ‘AP Bridge-Point to Point’: ................................................. 87
2.7.1.4 Setup procedure for ‘AP Bridge-Point to Multi-Point’: ....................................... 88
2.7.1.5 Setup procedure for ‘AP Bridge – WDS’ .............................................................. 89
2.7.1.6 Setup procedure for ‘Universal Repeater’ ........................................................... 91
7
2-7-2 Advanced Wireless Settings ................................................................................... 93
2-7-3 Wireless Security .................................................................................................... 97
2.7.3.1 WEP - Wired Equivalent Privacy .......................................................................... 98
2.7.3.2 Wi-Fi Protected Access (WPA): .......................................................................... 101
2.7.3.3 WPA RADIUS: ..................................................................................................... 103
2-7-4 Wireless Access Control ....................................................................................... 105
2-7- -5 Wi Fi Protected Setup (WPS) ............................................................................... 108
2-7-6 Security Tips for a Wireless Network ................................................................... 112
Chapter III Advanced Functions ......................................................................................... 113
3- 1 Quality of Service (QoS) .............................................................................................. 113
3-1- 1 Basic QoS Settings................................................................................................ 114
3-1- 2 Add a new QoS rule.............................................................................................. 117
3-2 Network Address Translation (NAT) ............................................................................ 120
3-2- 1 Basic NAT Settings (Enable or disable NAT function)........................................... 121
3-2- 2 Port Forwarding ................................................................................................... 122
3-2-3 Virtual Server ....................................................................................................... 125
3-2-4 Port Mapping for Special Applications ................................................................. 128
3-2-5 UPnP Setting......................................................................................................... 131
3-2-6 ALG Settings ......................................................................................................... 132
3- 3 Firewall ........................................................................................................................ 133
3-3-1 Access Control ...................................................................................................... 134
3.3.1.1 Add PC ............................................................................................................... 138
3-3-2 URL Blocking ......................................................................................................... 140
8
3-3-3 DoS Attack Prevention ......................................................................................... 143
3.3.3.1 DoS - Advanced Settings.................................................................................... 146
3-3-4 Demilitarized Zone (DMZ) .................................................................................... 148
3-4 System Status .............................................................................................................. 151
3-4-1 System information and firmware version .......................................................... 151
3-4-2 Internet Connection Status .................................................................................. 152
3-4-3 Device Status ........................................................................................................ 153
3-4- 4 System Log ........................................................................................................... 154
3-4- 5 Security Log.......................................................................................................... 155
3-4-6 Active DHCP client list .......................................................................................... 156
3-4- 7 Statistics ............................................................................................................... 157
3- 5 Configuration Backup and Restore.............................................................................. 158
3- 6 Firmware Upgrade ...................................................................................................... 159
3-7 System Reset ............................................................................................................... 161
Chapter IV: Appendix............................................................................................................. 162
4- 1 Hardware Specification ............................................................................................... 162
4- 2 Troubleshooting .......................................................................................................... 163
9
Chapter I: Product Information
1-1 Introduction
This Comtrend WR an excellent- 5882 is choice for Small office / Home
office users, allowing easily computers and network devices to share a
single xDSL / cable modem Internet connection. Easy installation
procedures allow any computer user to setup a network environment in
a . very short time And when the number of computers and
network-enabled devices , you can expand the number of increase
network attachports y by simpl ing a Comtrend switch to extend the
scope of your network.
/n -In addition, all computers and IEEE 802.11b/g wireless enabled
network devices (including PDA, cellular phone, game console, etc…) can
connect to this wireless router without additional cabling.
Other features of this router includ e:
• Allows multiple users to share a single Internet line
• Supports up to 253 users
• Access private LAN servers from the Internet
• Works /n with IEEE 802.11b/g wireless LAN devices
• Supports - DHCP (Server/Client) for easy IP address setup
• Advanced network and security features like: Special Applications,
QoS, DMZ, Virtual Servers, Access Control and Firewall
10
• Easily - monitor the router’s status with built in functions such as
DHCP Client Log, System Log, Security Log and Device/Connection
Status
• Easy to use Web-based GUI for network configuration and
management purposes
• Remote management function allows configuration and upgrades
from a remote computer (over the Internet)
11
1-2 System Requirements
An Internet connection provided by xDSL or cable modem with
an - RJ 45 Ethernet port.
Computer or network devices with wired or wireless network
interface card.
Web browser (Microsoft Internet Explorer 4.0 or above, Netscape
Navigator 4.7 or above, Opera web browser, or Safari web
browser).
An available AC power socket (100 – . 240V, 50/60Hz)
12
1-3 Package Contents
Before starting to use this router, please check if there’s anything
missing in the package, and contact your place of purchase to claim for
missing items:
* 1 - Driver/Utility/QIG/User Manual CD- ROM (1)
* - B ) 1 roadband Router (2
* 1 - C ( ) Ethernet able 3
* 1 - ( ) Printed QIG 4
2 1
3 4
13
1-4 W -n BGet familiar with your new ireless roadband
R outer
Front Panel
LED Status Description
POWER On . Router is switched on and correctly powered
WLAN
On WPS Wireless f . unction is enabled
Off . Wireless network is switched off
Flashing Wireless LAN activity (transferring or
receiving data).
WAN
LNK/ACT
On . WAN port is connected
Off . WAN port is not connected
Flashing data). WAN activity (transferring or receiving
LAN 1-4
LNK/ACT
On . LAN port is connected
Off . LAN port is not connected
Flashing data). LAN activity (transferring or receiving
14
Back Panel
Item Name Description
Antenna 2 dBi dipole antenna.
Reset / WPS Reset the router to factory default set tings (clear all
settings) or start the WPS function. Press this button
and hold for seconds to 10 restore all settings to factory
defaults seconds , and press this button for less than 5
to start the WPS function.
1 - 4 4. Local Area Network (LAN) ports 1 to
WAN . Wide Area Network (WAN / Internet) port
Power Power connector, connects to A/C power adapter.
15
Chapter II: System and Network Setup
2-1 Installation
Follow the instructions below to build the network connection between
your new and your computers, network devices:Wireless router
1. Connect your xDSL / cable modem to the WAN port of router by the
Ethernet cable.
2. Connect your computers and network devices (network-enabled
consumer devices other than computers, like game consoles a , or
switch / hub) to an available LAN port of the router.
16
3. Insert connect the A/C power adapter to the wall socket, in and then
it to the socket of the router.‘ ’ Power
4. C ‘ ’ heck all LEDs on the front panel. The Power LED should be steadily
on, WAN and LAN LEDs should be on if the computer / network
devices connected to the respective port of the router is powered on
and correctly connected. If the P ower LED is not on, or any LED you
expected to be on is not on, check the cabling, or jump to ‘4-2
Troubleshooting’ f s. or possible reasons and solution
17
2-2 Connecting to the wireless broadband router by web
browser
Before you can connect to the router start configuration and
procedures, your computer must be able to get an IP address
automatically a ’ a (using dynamic IP a If itddress). s set to use static IP
address, or you’ re unsure, follow the instructions below to configure
your computer to use dynamic IP address:
If the operating system of your computer is….
Windows 2000 - -2-1 go to section 2
Windows XP - -2-2 go to section 2
Windows Vista or Windows 7 go to section 2 - -2-3
18
2-2-1 Windows 2000 IP address setup:
1. Click ‘ ’ -the Start button (it should be located at the lower left corner of
your computer ), then click control panel. Double screen -click the
Network and Di -al up Connections Local Area Connection, icon click ; and
the Local Area Connection Properties window will appear. Select
‘ )’ and ‘ ’ Internet Protocol (TCP/IP then click the Properties button.
2. Select ‘ ’ ‘Obtain an IP address automatically and Obtain DNS server
address automatically’, then click the ‘OK’ button.
19
20
2-2-2 Windows XP IP address setup:
1. Click the ‘ ’ -Start button (it should be located at the lower left corner of
your computer ), then click control panel. Double screen -click the
Network and Internet Connections icon, click Network Connections,
then double-click Local Area Connection, the Local Area Connection
Status ‘ ’ window will appear, and then click the Properties button.
2. Select ‘ ’ ‘Obtain an IP address automatically and Obtain DNS server
address automatically’, then click the ‘OK’ button.
21
22
2-2-3 Windows Vista/ Windows 7 IP address setup:
1. Click ‘ ’ -the Start button (it should be located at the lower left corner of
your computer screen), then click control panel. Click View Network
Status and Tasks, and click then Manage Network Connections.
Right click The- Local Area Network, then select ‘ ’. Properties Local Area
Connection Properties ‘ window will appear, select Internet Protocol
Version 4 (TCP / IPv4), and then click the ‘ ’ Properties button.
23
2. Select ‘ ’ ‘Obtain an IP address automatically and Obtain DNS server
address automatically’, then click the ‘OK’ button.
24
2-2-4 Router IP address lookup
After the at the ‘IP address setup is complete, click start’ -> ‘ ’ run
bottom-lower corner of your desktop:
Input cmd OK button.‘ ’ ‘, then click the ’
25
Input ipconfig the heck ‘ ’ , and then press ‘ ’ CEnter key. the IP address
followed by ‘Default Gateway’ (In this example, the IP address of the
router 0.1) is 192.168.
Connect to the router s management interface by web browser’ .
After your computer obtained an IP address from the router, start your
web browser, and input the IP address of the router in the address bar.
The shown:following should be
NOTE: If the IP address of the “Defaul is not displayed, or the address t Gateway” is
followed by an ‘IP Address’ that network begins with ‘ ’169 , please recheck the
connection between your computer and router, and / or go to the beginning of this
chapter to recheck every step of up procedure.the network set
26
I snput the user name and password in their respective field , the default
user name is , and default password is ‘ ’admin the ‘ ’ admin , then press
the OK ‘ ’ button, and you can see the web management interface of this
router:
NOTE: If you can’t see the web management interface, and you’re being
prompted to input user name and password again, it means you didn’t the
input the username and password correctly. Please retype the user name
and password again. If you’re certain the user name and password you that
type are correct, please go to ‘4 2 Troubleshooting’ to perform a factory -
reset, to set the password back to its default value.
27
TIP: This page shows the major settfive ing categories: QuickSetup, General
Setup, Status, and Tools. You can find the shortcut which leads to Wireless
these setting categories at the upper of every page, and you can - right side
jump to another category directly donby clicking the link, you ’t have to go
back to the first page.
28
2-3 ‘Using Quick Setup’
This router provides a ‘ ’ Quick Setup procedure, which will help you to
complete all the required settings you need to access the Internet in a very
short time. Follow the Quick Setupse ‘instructions to complete the ’:
The following will be displayed : after logging in
1. Set Time Zone
Here are descriptions of every setup item:
Set Time Press - button, a drop down list
Zone (1): will be shown, and you can choose the time zone of
the location you live. i n which
Time Server Input the IP address / host name of the time
Address server (2): to use if you don’t want to use the default
one.
Daylight If the country you live uses daylight saving in s,
Savings ‘(3): check the Enable Function , and choose the ’ box
duration of daylight savings.
After you complete all settings, click the ‘Next’ (4) button.
2. WAN Type
2. WAN Type
1
2
3
4
NOTE: There are several time servers available on the Internet:
129 a.nist.gov).6.15.28 (time-
132.163.4.101 (time-a.timefreq.bldrdoc.gov)
131.107.1.10 (time- nw.nist.gov) If you found that the time of router is
incorrect, try another time server.
29
C ( ’ hoose the WAN Internet connection) type you re using on this page.
T here are six options for the type of Internet connection:
Cable Modem - -3-1 go to section 2
Fixed- - IP xDSL go to section 2-3-2
PPPoE xDSL - -3-3 go to section 2
PPTP xDSL - -3-4 go to section 2
L2TP xDSL - -3-5 go to section 2
If you’re not sure, contact your Internet service provider. A wrong
Internet connection type will cause connection problem, and you will a
not be able to connect to the Internet.
If you want to go back to the previous step, press ‘ ’ the Back button on
the bottom of this page.
30
NOTE: Some service providers use (Dynamic Host Configuration ‘ ’ DHCP
Protocol) to assign IP address to you. In this case, you can choose ‘Cable
Modem though’ as the Internet connection , eventype ’you re using another
connection type, like xDSL.
31
2-3-1 Setup procedure for ‘Cable Modem’ (Dynamic IP):
Here are descriptions of every setup item:
Host Name (1): I nput the host name of your computer, this is
optional, and only required if your service provider
asks you to do so.
MAC address AC address of your computer, if your I(2): nput the M
service provider only permits computers with a
certain MAC address to access the Internet . If
you’re using the computer which was used to
connect to the Internet via cable modem, you can
simply press Clone Mac addr ‘the ess’ button to fill
the MAC address field with the MAC address of
your computer..
After you f youcomplete all settings, click (3) button the ‘OK’ ; i want to
go back to previous menu, click the ‘Back’ button.
1
2
3
32
2-3-2 Setup procedure for ‘ - ’: Fixed IP xDSL
Here are descriptions of every setup item:
IP (1):A ddress I nput the IP address assigned by your service
provider.
Subnet Mask (2): subnet mask assigned by your service Input the
provider.
DNS address (3): nput the IP address of rver provided by I the DNS se
your service provider.
Service Provider nput the IP address of I the DNS server
Gateway Address (4): provided by your service provider.
1
2
3
4
5
You must use the addresses provided by your service provider, Internet
incorrect setting value will cause connection problems s .
33
When you complete all settings, press the ‘ ’ ( OK 5) button; if you want to
go back to menu, clickthe previous the ‘Back’ button.
NOTE: You can choose this Internet connection method if your service
provider assigns a fixed IP address (also know static address) to you, n as a
and doesn’t us e DHCP or PPPoE protocol. Please contact your service
provider for further information.
34
2-3-3 Setup procedure for ‘P ’: PPoE xDSL
Here are descriptions of every setup item:
User Name (1): I nput Internetthe user name assigned by your
service provider.
Password (2): I nput the password assigned by your Internet
service provider.
Service Name (3): G . Tive a name to this Internet service his is
optional.
MTU (4): Input the MTU value of your network connection. If
you don t know, you can use default value.’ the
Connection S elect the Internet connection type
Type (5): you wish to use (detailed listed below).explanation
Idle T me O idle time out, (detailed i u It (6): nput the explanation listed
below).
When you complete all settings, click ‘the OK’ (7) button; if you want to
go back to evious menu, clickthe pr the ‘Back’ button.
1
2
4
3
5
6
7
35
MTU the - Please use default value if you don t know what it is, or ask your ’
service provider for a proper value.
Connection Type There are 3 options: -
‘ ’ - Continuous keep Internet connection alive, do not disconnect,
C - onnect on Demand only connects to the Internet when there’s a
connection attempt,
‘ ’ - ’ Manual only connects to the ‘the Internet when Connect button on this
page is pressed, and disconnects when Disconnect button is pressed.the ‘
Idle Time Out: Specify the time to shutdown the Internet connection after no
Internet activity is detected by minute. T tion is only available when his op
connection type is Connect on Demand‘ ’.
36
2-3-4 Setup procedure for ‘PPTP xDSL’:
PPTP xDSL requires two kinds of settings: WAN interface setting (setup
IP address) and PPTP setting (PPTP user name and password). Here we
start from the WAN interface setting:
Select how you obtain and IP address from your service provider here.
You can choose Obtain an IP address automatically (equal to DHCP, ‘ ’
refer to Use the ‘ ’ ‘Cable Modem section above), or following ’ IP address
(i.e. static IP address).
WAN interface settings must be correctly set, or the Internet connection
will fail even though the ontact your Internet CPPTP settings are correct.
service provider if you don’ t know how to fill in these fields.
Now go to the PPTP settings section:
37
Here are descriptions of every setup item:
User nput Name I(1): the user ID (user name) assigned by your
Internet service provider.
Password (2): I nput the password assigned by your Internet
service provider.
PPTP I nput the IP address of PPTP gateway
Gateway (3): assigned by your Internet service provider.
Connection I nput the connection ID. This is
ID (4): optional and you can leave it blank.
MTU (5): Input the MTU value of your network connection. If
you don t know, you can use default value.’ the
1
2
3
4
5
6
7
9
8
38
BEZEQ- (6 S ‘ - ’ ISRAEL ): etting item BEZEQ ISRAEL is only required to
C ’ heck if you re using the service provided by the
BEZEQ network in Israel.
Connection S elect the type of Internet connection you wish to
type (7) : use, refer to the previous section for detailed
descriptions.
Idle Time I nput the idle time out of the Internet connection
Out (8): you wish to use, and refer to the previous section
for detailed descriptions.
When you OK (complete all settings, click the ‘ 9) button; if you want to
go back to previous menu, click the ‘Back’ button.
39
2-3-5 Setup procedure for ‘ ’: L2TP xDSL
L2TP is another popular connection method for xDSL and other Internet
connection types, and a all required setting items are the same as PPTP
connection.
Like PPTP, there are two kinds of required setting , we ll start from s ’
‘ ’: WAN Interface Settings
Select how you obtain IP address from your service provider. You can
choose the‘ ’ Obtain an IP address automatically (equal to DHCP, refer to
‘ ’ ‘ ’ Cable Modem section above), or Use the following IP address (equal
to static IP address, refer to the ‘ ’ PPPoE xDSL section above).
WAN interface settings must be correctly set, or the Internet connection
will fail even thought the CPPTP settings are correct. ontact your
Internet don service provider if you ’ t know how to fill in these fields.
Now go to L2TP settings section:
40
Here are descriptions of every setup item:
User nput Name I(1): the user ID (user name) assigned by
your Internet service provider.
Password (2): I nput the password assigned by your Internet
service provider.
L2TP Gateway (3): Input the IP address of L2TP gateway assigned by
your Internet service provider.
MTU (4): Input the MTU value of your network connection. If
you don t know, you can use default value.’ the
Connection S elect the type of Internet connection you wish
type (5): to use, please refer to last section for detailed
descriptions.
1
2
4
3
5
7
6
41
Idle Time I nput the idle time out of Internet connection
Out (6): you wish to use, and refer to last section for
detailed descriptions.
When you , click OK (7)complete all settings the ‘ button; if you want to
go back to previous menu, click the ‘Back’ button.
Upon clicking the displayed on ‘OK’ (7) button, you’ll see the following
your web browser:
C ‘ ’ ’lick the Apply button to prepare to restart the router, and you ll see
this message:
After the countdownthen click the ‘OK!’ button. You’ll be brought back
to the router management interface again, and the router is ready with
new settings.
42
2-4 Basic Setup
In this chapter, you how to change the time zone, password, and ’ ll learn
remote management settings. S itart your web browser and log nto the
router web management interface and then, click ‘ ’ the General Setup
link at the upper of the web management-right side interface.
2-4- -1 Time zone and time auto synchronization
Follow the instructions below to set time zone and time
auto- synchronization parameters:
C ‘ lick the General Setup’ menu at the upper right side of the web
management interface, and then select System on the left menu bar
followed by Time Zone.
43
S ‘ ’ -elect the time zone from the Set time zone drop down list, and input
the IP address or host name of server. If you want to enable the time the
daylight savings setting, check Enable Function the ‘ ’ box, and set the
duration of daylight setting. When you finish, click the ‘Apply’ button.
You’ ll see the following message displayed on the web browser:
Press the ‘ ’ Continue button to save the settings and go back to the web
management interface; press the ‘Apply’ button to save the settings
made and restart the router so the settings will take effect after it
reboots.
NOTE: You can refer to the instructions given in the last chapter: ‘Using
Quick Setup , for detailed descriptions on time zone’ settings.
44
2-4-2 Change management password
The default password of this router is admin, and it s displayed on the ’
login prompt when accessed from the web browser.
To change follow the instructions belowthe password, :
C ‘ ’ lick the System menu on the left of the web management interface,
then click , and the following will be displayed on ‘Password Settings’
your web browser:
Here are descriptions of every setup item:
Current Input current password.
Password (1):
New Password (2): I nput new password.
Confirmed Input new password again.
Password (3):
When you finish, click ‘the Apply’ button the . If you want to keep original
password unchanged, click the ‘Cancel’ . button
1
2
3
45
If the password you typed in ‘ ’ New Password (2) and ‘Confirmed
Password’ ’(3) field are not the same, you ll see the following message:
R etype the new password again when you see the above message.
If you see the following message:
It means the content in ‘Current Password’ field is wrong, click ‘ ’ the OK
button to go back to previous menu, and try to input current password
again.
If the current and new passwords are correctly inputted, after you click
the button‘ ’ Apply , you’ ll be prompted to input your new password:
46
U . se the new password to enter web management interface againthe
47
2-4-3 Remote Management
This router does not allow management access from remote the Internet
by default. However, you can still manage this router from a specific IP
address by enabling the ‘ ’ Remote Management Function.
To do so, follow the instructions below:
C ‘lick the System interface, ’ menu on the left of the web management
then click , and the following will be displayed on ‘ ’Remote Management
your web browser:
Here are descriptions of every setup item:
Host Address (1): I nput the IP address of the remote host you wish to
initiate management access . with
Port (2): You can define the port number this router should
expect an incoming request ’from. If you re
providing a web service (default port number is 80),
you should try to use port number. You can another
use the default port setting , or something ‘ ’8080
like ‘ ’ ‘32245 or 1429’. (Any integer between 1 and
65534)
1
2 3
4
48
Enabled (3): Select the field to enable the configuration.
When you , click and ycomplete all settings the ‘Apply’ button, ou’ll see
the following message displayed on the web browser:
Press ‘ ’ Continue to save the settings made and go back to the web
management interface; press ‘Apply’ to save the settings made and
restart the router so the settings will take effect after it reboots.
NOTE: When you want to manage this router from another computer on the
Internet, you have to input the IP address and port number of this router.
NOTE: The default port number the web browser will use is ‘80’. If the ‘ ’ Port
sett 80ing in this page is not ‘ ’, you have to assign the port number in the
address bar of web browser manually. For example, if the IP address of the
this router is 1.2.3.4, and the port number you set is 8888, you have to input
following address in the address bar of web browser:
http://1.2.3.4:8888
49
2-5 Setup Internet Connection (WAN Setup)
The the Quick Internet connection setup can be completed by using ‘
Setup section’ as procedure described in 2-3. However, you can setup
WAN connections by using WAN configuration menu. You can also the
set advanced functions like DDNS (Dynamic DNS) here.
For WAN setup, follow these instructions:
C ‘ ’ . lick the WAN menu on the left of the web management interface
S elect an Internet connection method depending on the type of
connection you re using. You can either click the connection method on ’
the left (1) or right (2). If you select the connection method on the right,
click the ‘More Configuration’ button after a method is selected.
Dynamic IP - -5-1 go to section 2
Static IP - -5-2 go to section 2
PPPoE - -5-3 go to section 2
1
2
50
PPTP - -5-4 go to section 2
L2TP - -5-5 go to section 2
DNS - -5-6 go to section 2
DDNS - -5-7 go to section 2
WISP - -5-8 go to section 2
IPv6 - go to section 2-5-9
51
2-5-1 Setup procedure for ‘Dynamic IP’:
Here are descriptions of every setup item:
Host Name (1): I nput the host name of your computer, this is
optional, and only required if your service provider
asks you to do so.
MAC nputAddress (2): I the MAC address of your computer, if your
service provider only permits computers with
certain MAC address to access the Internet. If
you’ a re using computer which used to connect tois
the Internet via cable modem, you can simply press
the ‘ ’ Clone Mac address button to fill the MAC
address field with the MAC address of your
computer.
After you f you want complete all settings, the buttonclick ‘ ’ Apply (3) ; i
to remove the you inputted the Cancel s value , click ‘ ’ button.
1
2
3
52
After you click the ‘Apply’ button the , following will be displayed on your
web browser:
Click the ‘ ’ Continue (1) button menu;to go back to the previous setup to
continue on router setup, or click the ‘Apply’ button to reboot the router
so the settings will take effect (wait for about 60 seconds while the
router is rebooting).
53
2-5-2 Setup procedure for ‘Static IP’:
Here are descriptions of every setup item:
IP address(1): I nput the IP address assigned by your service
provider.
Subnet Mask (2): nput subnet mask assigned by your service I
provider.
Service Provide nput the IP address of r I the DNS
Gateway Address (3): server provided by your service provider.
After you complete all settings, click (4) button and the the ‘Apply’
following will be displayed on your web browser:
C ‘ ’ lick Continue to go back to the previous setup menu; to continue on
other setup procedures, or click the ‘Apply’ button to reboot the router
so the settings will take effect (wait for about 60 seconds while the
router is rebooting).
If you want to reset all k to previouslythe settings in this page bac -saved
values ‘ ’ , click the Cancel button.
1
2
3
4
54
2-5-3 Setup procedure for ‘PPPoE’:
Here are descriptions of every setup item:
User Name (1): I nput Internetthe user name assigned by your
service provider.
Password (2): I nput the password assigned by your Internet
service provider.
Service Name (3): G ive a name to this Internet ser e.vic This is
optional.
MTU (4): Input the MTU value of your network connection. If
you don t know, you can use default value.’ the
Connection S elect the type of Internet connection you
Type (5): wish to use.
1
2
4
3
5
6
7
55
Continuous – The connection will be always kept on. If
the connection is interrupted, the router will re-connect
automatically.
Connect On Only connect when you want to -Demand –
surf the Internet. “ ” Idle Time Out is set to stop the
connection when the network traffic is not sending or
receiving after an idle time.
Manual – After you have selected this option, you will
see the “ ” “ ” Connect button and Disconnect button, click
“’ ” Connect and the router will connect to the ISP. If you
want to stop the connection, c lick the “ ” Disconnect
button.
Idle T me Oi u t (6): If you have selected the connection type to
“ - - ” Connect On Demand , input the idle time out.
After you complete all settings, click (7) button and the the ‘Apply’
following will be displayed on your web browser:
56
C ‘ ’ lick the Continue button menu;to go back to the previous setup to
continue on other setup procedures, or click the ‘Apply’ button to
reboot the router so the settings will take effect (wait for about 60
seconds while router is rebooting).the
If you want to reset all the settings in this page back to previously-saved
values ‘ ’ , click the Cancel button.
57
2-5-4 Setup procedure for ‘PPTP’:
PPTP requires two kinds of setti : WAN interface setting (setup IP ngs
address) and PPTP setting (PPTP user name and password). Here we
start from the WAN interface setting:
Select how you obtain IP address from your service provider. You can an
choose ‘ ’ Obtain an IP address automatically (equal to DHCP, refer to
‘ ’ ‘ ’ Cable Modem section above), or Use the following IP address (i.e.
static IP address)
The WAN interface settings must be correctly set, or the Internet
connection will fail even though the CPPTP settings are correct. ontact
your Internet ’service provider if you don t know what you should put in
these fields.
Now go to the PPTP settings section:
58
Here are descriptions of every setup item:
User nput IName (1): the user ID (user name) assigned by your
Internet service provider.
Password (2): I nput the password assigned by your Internet
service provider.
PPTP Gateway (3): Input the IP address of PPTP gateway assigned by
your Internet service provider.
Connection ID (4): nput the connection ID, this is optional and you can I
leave it blank.
MTU (5): Input the MTU value of your network connection. If
you don t know, you can use default value.’ the
1
2
3
4
5
7
8
9
6
59
BEZEQ- ISRAEL (6): If you are connecting to the BEZEQ network in
Israel, enable this function.
Connection S elect the type of Internet
type (7 2-5-): connection you wish to use, refer to section 3
for detailed descriptions.
Idle Time Out (8 I ): nput the idle time out of Internet connection you
wish to use, and refer to 2-5-3 section for detailed
descriptions.
When you , click and the complete all settings the ‘Apply’ (9) button
following will be displayed on your web browser:
C ‘ ’ lick Continue to go back to the previous setup menu; to continue on
other setup procedures, or click the ‘Apply’ button to reboot the router
so the settings will take effect (wait for about 60 seconds while the
router is rebooting).
If you want to reset all the settings in this page back to previously-saved
values ‘ ’ , click the Cancel button.
60
2-5-5 Setup procedure for ‘L2TP’:
Here are descriptions of every setup item:
User ID (1): I nput the user ID (user name) assigned by your Internet
service provider.
Password (2): I nput the password assigned by your Internet service
provider.
L2TP I nput the IP address of L2TP gateway
Gateway (3): assigned by your Internet service provider.
MTU (4): Input the MTU value of your network connection. If you
don’t know, you can use default value.the
Connection Select the type of Internet connection
type (5): you wish to use, refer to section 2-5-3 for detailed
descriptions.
1
2
4
3
5
7
6
61
Idle Time I nput the idle time out of Internet connection
Out (6): 2-5-3 you wish to use, and refer to section for detailed
descriptions.
When you , clickcomplete all settings the ‘Apply’ (7) button and the
following will be displayed on your web browser:
C ‘ ’ lick the Continue button menu;to go back to the previous setup to
continue on other setup procedures, or click the ‘Apply’ button to
reboot the router so the settings will take effect (wait for 6about 0
seconds while is rebooting).the router
If you want to reset all the settings in this page back to previously-saved
values ‘ ’ , click the Cancel button.
62
2-5-6 Setup procedure for ‘ ’: DNS
If you select ‘ ’ ‘Dynamic IP or PPPoE’ as the Internet connection method,
at least one DNS server’ s IP address should be assigned automatically.
However, if you have a preferred DNS server, or your service provider
didn’ t assign the IP address of the DNS server for any reason, you can
input the IP address of the DNS server here.
Here are descriptions of every setup item:
DNS Address (1): Input the IP address of DNS server provided by the
your service provider.
Secondary Input the IP address of another DNS
DNS Address ( server provided by your serv2 ): ice provider. This is
optional.
NOTE: Only the inputtedIP address can be here; DO NOT use the hostname
of DNS server! (i.e. only numeric characters and dots are accepted)
10.20.30.40……………………………………………………………… Correct
dns.serviceprovider.com………………………………………… ... Incorrect
1
2
3
63
After you complete all settings, click (3) button and the the ‘Apply’
following will be displayed on your web browser:
Click the ‘ ’ Continue button to the go back to previous setup menu; to
continue on other setup procedures, or click the ‘Apply’ button to
reboot the router so the settings will take effect (wait for about 60
seconds while is rebooting).the router
If you want to reset all the settings in this page back to previously-saved
values ‘ ’ , click the Cancel button.
64
2-5-7 Setup procedure for ‘ ’: DDNS
DDNS (Dynamic DNS) is a Hostname mapping service for n IP- -to Internet
users who don t have a static (fixed) IP address. s will occur’ Problem
when user(s) want to provide services to other users on the Internet, as
their IP address will vary every time when connected to the Internet.
This router supports DDNS service service providersthe of several , for
example:
DynDNS (http://www.dyndns.org)
TZO (http://www.tzo.com)
Go to one of the DDNS service provider listed above, and ’s WebPages
get a free DDNS account by the instructions given on their following
webpage.
Here are descriptions of every setup item:
1
2
3
4
5
6
65
Dynamic DNS (1): If you want to enable the DDNS function, select
‘ ’Enabled ; otherwise select ‘Disabled’.
Provider (2): Select your DDNS service provider.
Domain Name (3): I ’nput the domain name you ve obtained from the
DDNS . service provider
Account / Input account or email of DDNS registration.
E- Mail (4):
Password / Key (5): .Input the DDNS service password or key
After you complete all settings, click the ‘ ’ Apply (6) button and the
following will be displayed on your web browser:
Click the ‘ ’ Continue button to the go back to previous setup menu; to
continue on other setup procedures, or click ‘Apply’ to reboot the router
so the settings will take effect (wait for about 60 seconds while the
router is rebooting).
If you want to reset all settings in this pthe age back to previously-saved
values ‘ ’ , click the Cancel button.
66
2-5-8 Setup procedure for ‘ ’: WISP
If the network service a provided by your service provider is through
wireless network, select this mode. After you have connected the router
to the access point of the service provider wirelessly, set up the WAN
connection type in the WAN page.
Here are descriptions of every setup item:
Disable/Enable/ There are three selections for
staE nable (1): wireless ISP functions.
Disable: disables this function.
Enable: enable this function and the router can s
connect to the access points installed by your
wireless service provider. Any clients associated
with the router can access the Internet service
through the wireless network.
1
2
3
4
5
67
Note: In this mode, if you are informed by your
wireless ISP that the wireless settings of the
access point have changed, configure the router in
this page match the settings.to
staE Enable: nable this function and the router can only allow
connection through wired Ethernet cable for WAN
access service.
SSID wireless (2 ): This is the name of the network. Input the
SSID name that your ISP provided to you.
Site Survey (3 ‘): Click the Select Site Survey’ button, then a
“Wireless Site Survey Table will pop up. It will ” list
all available access points nearby. Select the access
point designated by your wireless ISP in the table
and the rout er will join the wireless network
through this access point.
Security Settings If the access point enables wireless security, yo (4): u
have to follow the same settings in order to access
the access point. Click to set security settings for
this connection ‘2-7-(go to section 3 Wireless
Security’ for detailed instructions).
After you complete all settings, click ) button and the the ‘Apply’ (5
following will be displayed on your web browser:
68
Click the ‘ ’ Continue button to the go back to previous setup menu; to
continue on other setup procedures, or click the ‘Apply’ button to
reboot the router so the settings will take effect (wait for about 60
seconds while is rebooting).the router
If you want to reset all -the settings in this page back to previously saved
values ‘ ’ , click the Cancel button.
69
2-5-9 Setup procedure for ‘IPv6’:
Here are descriptions of every setup item:
WAN IPv6 Settings (1): Select the required transition mechanism
as assigned by your service provider.
LAN IPv6 Settings (2): Select the auto configuration method for
IPv6.
IPv6 Address Input the IPv6 address for the AN port. (3): L
Subnet Prefix Length (4): Default is set at 64. Only change if
required to do so by your ISP.
1
2
3
4
70
After you complete all settings, click ) button and the the ‘Apply’ (5
following will be displayed on your web browser:
Click the ‘ ’ Continue button to the go back to previous setup menu; to
continue on other setup procedures, or click the ‘Apply’ button to
reboot the router so the settings will take effect (wait for about 60
seconds while is rebooting).the router
If you want to reset all the settings in this page back to previously-saved
values ‘ ’ , click the Cancel button.
71
2-6 Wired LAN Configurations
Before all computers using wired Ethernet connections (i.e. those
computers that connect to this router s LAN port 1 ’ to 4 by Ethernet
cable) can communicate with each other and access the Internet, they
must have a valid IP address.
There are two ways to assign IP addresses to computers: static IP
address (set the IP address for every computer manually), and dynamic
IP address (IP address of computers will be assigned by es the router
automatically.
It’ s recommended for most of computers to obtain an IP address
automatically, as it will save a lot of time on setting IP addresses for
every computer. For servers and network devices which will provide
services to other computers a and users that come from Internet, static
IP address should be used, so other computer s can locate the server.
73
2-6- : 1 LAN IP section
Here are d of every setup itemescriptions :
IP address (1): I nput the IP address of this router.
Subnet Mask (2): subnet mask for this network Input the .
802.1d If you wish to activate the 802.1d spanning tree
Spanning Tree (3): ‘function, select Enabled for setup ’ item ‘802.1d
Spanning Tree’ ‘ ’ , or set it to Disabled
DHCP Server (4): f you want to activate DHCP server function of I the
this router, select , or ‘ ’Enabled set it to ‘ ’.Disabled
Recommended Value if you dons ’t know what to fill:
IP Address: 192.168.0 .1
Subnet Mask: 255.255.255.0
802.1d Spanning Tree: Disable
DHCP Server: Enable
1
3
2
4
74
2-6- 2 DHCP Server:
These settings are only available when DHCP Serverthe ‘ ’ in the ‘LAN IP’
section is , and h‘Enabled’ ere are descriptions of every setup item:
Lease Time (1): Choose a lease time (the duration that every
computer can keep a specific IP address) of every IP
address drop downassigned by this router from the -
menu.
Start IP (2): I nput the start IP address of the IP range.
End IP (3): I nput the end IP address of the IP range.
Domain N If you wish, you can also optionally input the a me (4):
domain name for your network. This is optional.
Recommended Value if you dons ’t know what to fill:
Lease Time: Two Weeks (or ‘Forever’, if you have less than 20 computers)
Start IP: 192.168.2.100
End IP: 192.168.2.200
Domain Name: (leave it blank)
1
3
4
2
75
NOTE:
1. The number of the last field (mentioned ‘d’ ‘ ’ field) of End IP must be greater
than ‘the Start IP’ ’ , and cannot as thebe the same router s IP address.
2. The former three fields of IP address of ‘Start IP’ ‘ ’ ‘, End IP , and IP Address
of ‘ ’ sLAN IP ection (mentioned , and ‘a’ ‘b’, ‘c’ field) should be the same.
3. These settings will affect wireless clients too.
76
2-6- 3 Static DHCP Leases Table:
This function allows you to assign a static IP address to a specific
computer forever and still enjoy the benefit of using a DHCP server. A
m . aximum of 16 static IP addresses can be assigned here
(If you set ‘ ’ ‘ r’ Lease Time to foreve in the ‘ ’ DHCP Server section, you
can also assign an IP address to a specific computer permanently,
however, you will not be able to assign a certain IP address to a
specific computer, since IP addresses will be assigned in random order
by this way).
Here are descriptions of every setup item:
Enable Static Check this box to enable this function,
DHCP Leases (1): otherwise uncheck it to disable this function.
MAC Address (2): nput the MAC address of the computer or I
network device (total 12 characters, with
characters from 0 to 9, and from a to f, like
‘ ’ 001122aabbcc )
1
2 3
4
77
IP address (3): Input the IP address you want to assign to this
computer or network device.
‘ ’ Add (4): After you inputted MAC address and IPthe
address pair, click this button to add the pair to
the static DHCP leases table.
If you want to remove all the the characters you just inputted, click
‘ ’ . Clear button
After you clicked , the MAC address and IP address the ‘Add’ button
mapping will be added to the ‘ ’ Static DHCP Leases Table section.
If you want to delete a specific item, check the ‘Select’ box of a MAC
address and IP address mapping (1), then click button (2); the ‘ ’ Delete
if you want to delete all mappings, click the ‘ l’ Delete Al (3) button.
After you complete the Apply all LAN settings, click ‘ ’ button on the
bottom of this page. After you click ‘Apply’, the following will be
displayed on your web browser:
1
2 3
78
Click the ‘ ’ Continue button menu;to go back to the previous setup to
continue on router setup, or click the ‘Apply’ button to reboot the router
so the settings will take effect (wait for about 60 seconds while the
router is rebooting).
79
2-7 Wireless LAN Configurations
If your computer, PDA, game console, or other network devices are
equipped with a wireless network interface, you can use the wireless
function of this router to them connect toallow the Internet and
share resources with other computers with LAN connection. a -wired
You can also use the built in security functions to protect your -
network from being by malicious intruders.attacked
Follow these instructions to set wireless parameters:
C ‘ ’ at lick the Wireless menu the top of the web management interface,
and the will be displayed on your web browse ou must following r. Y
enable the wireless function of this router, or the wireless interface of
this router will not function. (1), then click S ‘elect Enable’ the ‘Apply’ (2)
button.
If you’re coming here because you want to disable the wireless
function, selec (3), then click (2) button.t ‘Disable’ the ‘Apply’
After you click will be displayed on ‘the Apply’(2) button, the following
your web browser:
1 3 2
80
Click the ‘ ’ Continue button to go back to the previous setup menu; to
continue on other setup procedures or click , ‘Apply’ to reboot the router
so the settings will take effect (wait for about 60 seconds while the
router is rebooting).
81
2-7-1 Basic Wireless Settings
C ’ - lick the ‘Wireless menu on the upper right side of the web
management interface, then cli , and the ck ‘ ’Basic Settings following will
be displayed on your web browser:
This modes: wireless router can work in 6
a. A Pccess oint: Standard wireless AP .
b. Station-Infrastructure: Configure the router to Ethernet device an
such be a s TV, Game player, HDD&DVD to enable the Ethernet device to
a wireless station.
c. AP Bridge-Point to Point: Connect this router with another wireless
router, to expand the scope of the network.
82
d. AP Bridge-Point to Multi-Point: Connect this router with up to four
other wireless routers, to expand the scope of the network.
e . AP Bridge-WDS: Connect this router with up to four WDS-capable
wireless routers, to expand the scope of the network.
f. Universal Repeater: The router can act as AP at theStation and an
same time. It can use function to connect to a Root AP and the Station
use the AP function to service all wireless stations within its coverage.
S elect the operation mode you want to use from ‘ ’ -the Mode drop down
menu (1), and continue on other operation mode specific settings:
AP - -7-1-1 go to section 2
Station- - Infrastructure go to section 2-7-1-2
AP Bridge Point to Point- - -7-1-3 go to section 2
AP Bridge Point to Multi- -Point - -7-1-4 go to section 2
AP Bridge- - 2-7-1-5 WDS go to section
Universal Repeater - go to section 2-7-1-6
NOTE: For AP Bridge AP Bridge‘ -Point to Point’ and ‘ - -Point to Multi Point’
mode, operatesthe wireless router in wireless bridge dedicated mode – the
wireless router is only used to expand the scope of the network, and no
wireless clients will be accepted. If you want to use your wireless router to
expand the scope of network, and also the accept wireless clients, please
select ‘AP Bridge Universal Repeater- ’ ‘WDS or ‘ mode.
83
2.7.1.1 ‘A P ’: Setup procedure for ccess oint
S - 1elect Access Point from the ‘Mode’ drop down menu ( ), and the
following will be displayed:
Here are descriptions of every setup item:
Band (2 elect the radio band from one of following options:): S
1
2
3
4
5
84
NOTE: For 802.11b and 802.11g mode, the signals can be transmitted only
by antenna 1 (The antenna in the right side of the rear panel) .
For 802.11n mode: The router is operating in a 1T2R Spatial Multiplexing
MIMO configuration. 1 antenna is for signal transmitting and 2 antennas are
for signal receiving.
2.4 GHz (B) 2.4GHz band, only allows 802.11b wireless
network client this router s to connect to
(maximum transfer rate 11Mbps).
2.4 GHz (N) 2.4GHz band, only allows 802.11n wireless
network clients to connect to this router
(maximum transfer rate 300Mbps).
2.4 GHz (B+G) 2.4GHz band, only allows 802.11b and 802.11g
wireless network clients to connect to this
router (maximum transfer rate 11Mbps for
802.11b clients, and maximum 54Mbps for
802.11g clients).
2.4 GH 2.4GHz band, only allows 802.11g wireless z (G)
network client this router s to connect to
(maximum transfer rate 54Mbps).
2.4 GHz (B+G+N) 2.4GHz band, allows 802.11b, 802.11g, and
802.11n wireless network clients to connect to
this router (maximum transfer rate 11Mbps for
802.11b clients, maximum 54Mbps for 802.11g
clients, and maximum 300Mbps for 802.11n
clients).
85
SSID (3): This is the name of the wireless router. You can type
any alphanumerical characters here, maximum 32
characters. The SSID is used to identify your own
wireless router from others when there are other
wireless routers in the same area. The d efault SSID
is ‘ ’ ’default , it s recommended to change the default
SSID value to the one which is meaningful to you,
like myhome, office_room1, etc.
Channel Number (4) elect a channel from the : S drop down- list of
‘ ’Channel Number , available channel numbers are 1
to 13 for European countries, 1 to 11 for USA. You
can choose any channel number you want to use,
and almost all wireless clients can locate the
channel you without any ’re using automatically
problem. However, it’s still useful to remember the
channel number you use, some wireless clients
support manual channel number select, and this
would help in certain scenarios when there is some
radio communication problem.
Associated Clients (5): Click the ‘Show Active Clients’ button, then an
“Active Wireless Client Table” will pop up. You can
see the status of all active wireless stations that are
connecting to the access point.
TIP: You can try to change channel number to another one if you think the
data transfer rate is too hslow. T ere could be some other wireless routers
using the same channel, which will disturb the radio communication
between the wireless client and the wireless router.
NOTE: If you don t have special reason to limit the type of allowed ’ a
wireless client s recommended to choose s ’, it ‘2.4 GHz (B+G+N) to maximize
wireless client compatibility.
86
2.7.1.2 ‘ - ’: Setup procedure for Station Infrastructure
In this mode, you can connect the router to an Ethernet device such as
TV, Game player, HDD&DVD to enable the Ethernet device be a to
wireless station and join a wireless network through an access point or
AP router.
S - 1elect Station (Infrastructure) from the ‘Mode’ drop down menu ( ), and
the following will be displayed:
Here are descriptions of every setup item:
Band (2) Select the band you want to us: e.
SSID (3): This is the name of the wireless network. You can
type the SSID of the network you would like to
connect here. to
Site Survey wireless router as a wireless : (4) When you use this
station for network device to have an Ethernet
wireless capability, you have to associate it with a
working access point. Click ‘ the Select Site Survey’
button, then a “Wireless Site Survey Table will pop ”
up. It will list all available access points nearby. You
can select one access point in the table and it will
join the wireless LAN through this access point.
2
3
4
1
87
2.7.1.3 ‘ - ’: Setup procedure for AP Bridge Point to Point
In this mode, you can connect your wireless router with another, to
combine two access points and expand the scope of the wireless
network, and all clients (wired only AP will not accept wireless clients –
in this mode re on the same ) of the two wireless routers will think they’
physical network. This function is very convenient when you need to
connect two networks between two buildings.
S - 1elect AP Bridge (Point to Point) from the ‘Mode’ drop down menu ( ),
and the following will be displayed:
Here are descriptions of every setup item:
Band (2): Select the band you want to use, the two wireless
routers must use the same setting.
Channel Select the channel you want to use, the two
Number (3): wireless routers must use the same setting.
MAC
address 1(4): Input the MAC address of another wireless router.
Security Click the ‘Security Settings’ button for this
Settings (5): connection.
(G ‘2-7-o to section 3 Wireless Security’
for detailed instructions).
NOTE: wo The t wireless routers must use the same mode, band, channel
number, and security setting!
1
2
3
4
5
88
2.7.1.4 ‘ - - ’: Setup procedure for AP Bridge Point to Multi Point
In this mode, you can connect your wireless router with at least four
wireless routers to expand the scope of wireless network, and all clients
(wired only AP will not accept wireless clients in this mode) of the –
wireless routers will think they’ re on the same physical network.
S - -elect AP Bridge (Point to Multi Point) from the ‘Mode’ drop down
menu (1 ), and the following will be displayed:
Here are descriptions of every setup item:
Band (2): Select the band you want to use, all the wireless
routers must use the same setting.
Channel Select the channel you want to use, all the wireless
Number (3) routers must use the same setting.:
MAC address Input the MAC address of the other wireless
1 to 4 (4 - : 7) routers.
Security Click the ‘Security Settings’ button for this
Settings (8 . ): connection
(G ‘2-7-o to section 3 Wireless Security’
for detailed instructions).
1
2
3
4
5
6
7
8
89
2.7.1.5 ‘ – ’ Setup procedure for AP Bridge WDS
In this mode, you can expand the scope of network by combining up the
to four other access points together, and every access point can still
accept wireless clients.
S - 1elect AP Bridge (WDS) from the ‘Mode’ drop down menu ( ), and the
following will be displayed:
Here are descriptions of every setup item:
Band (2) Select the band you want to use,: all the wireless
routers must use the same setting.
SSID (3): Input the SSID of your wireless router, the setting
should be the same with other wireless routers for
the convenience of roaming.
1
2
3
4
5
7
8
6
9
10
NOTE: For WDS mode, the output signal nature is the same as that of
normal AP mode.
90
Channel Select the channel you want to use, all the wireless
Number (4) routers must use the same setting.:
Associated Clients Show Active Clients (5): Click the ‘ ’ button, then an
“Active Wireless Client Table” will pop up. You can
see the status of all active wireless stations that are
connecting to the access point.
MAC address Input the MAC address of other wireless routers.
1 to 4 (6 - 9):
Security Click to set security settings for this connection
Settings ( ): (G ‘2-7-10 o to section 3 Wireless Security’ for detailed
instructions).
91
2.7.1.6 ‘ ’ Setup procedure for Universal Repeater
In this mode, the router can act as a a wireless repeater; it can be
Station Statio an and AP at the same time. It can use the n function to
connect to a Root AP and use the AP function to service all wireless
stations within its coverage.
S - 1elect Universal Repeater from the ‘Mode’ drop down menu ( ), and the
following will be displayed:
Here are descriptions of every setup item:
Band (2): Select the band you want to use, all the wireless
routers must use the same setting.
SSID (3): This is the name of the wireless router. You can type
any alphanumerical characters here, maximum 32
characters. SSID is used to identify your own
wireless router from others when there are other
wireless routers in the same area. Default SSID is
‘ ’ ’s default , it recommended to change default SSID
value to the one which is meaningful to you, like
myhome, office_room1, etc.
1
2
3
4
5
7
6
NOTE: For Repeater Mode, this will demodulate the received signal, router
checking if this signal is noise for the operating network then have the
signal modulated and amplified again. The output power of this mode is the
same as that of WDS and normal AP mode.
92
Channel Select the channel you want to use, all the wireless
Number (4): clients must use the same setting.
Associated Clients (5): Click Show Active Clientsthe ‘ ’ button, then an
“Active Wireless Client Table” will pop up. You can
see the status of all active wireless stations that are
connecting to the access point.
Root AP SSID (6): In ‘ ’ Universal Repeater mode, this device can act as
a station to connect to a Root AP. You should assign
the SSID of the Root AP here or click Select Site ‘
Survey’ . button to choose a Root AP
Site Survey (7): Select Site Survey Click ‘the ’ button, then a
“Wireless Site Survey Table will pop up. It will list ”
all available access points nearby. You can select
one access point in the table and the rout er will join
the wireless LAN through this access point.
After you complete the Apply button, sthe wireless setting , click ‘ ’ after
you click , the following will be displayed on your web browser:‘Apply’
Click the ‘ ’ Continue button to the go back to previous setup menu; to
continue on router setup, or click the ‘Apply’ button to reboot the router
so the settings will take effect (wait for about 60 seconds while router is
rebooting).
93
2-7-2 Advanced Wireless Settings
This router provides some advanced control of wireless parameters, if
you want menu on the to configure these settings, click ’ the ‘Wireless
upper right side Advanced - ‘of the web management interface, then click
Settings’ , and the following will be displayed on your web browser:
Here are descriptions of every setup item:
Fragment The threshold (number of bytes) for the
Threshold (1): fragmentation boundary for directed messages. It is
the maximum data fragment size that can be sent.
Do not modify the default value if you don’t know
w . hat it is, default value is 2346
RTS Threshold (2): The RTS (Request To Send) threshold parameter
controls what size data packet (number of bytes) the
low level RF protocol issues to an RTS packet. Do
not modify default value if you don’t know what it
is, default value is 2347.
1
2
3
4
5
7
8
6
9
10
11
12
94
Beacon Interval : (3) The Beacon Interval value indicates the frequency
interval of the beacon. A beacon is a packet
broadcast by the Router to synchronize the
wireless network. Do not modify default value if
you don’t know what it is, default value is 100.
DTIM Period (4): Configures the DTIM (Delivery Traffic Indication
Message) send period. Do not modify the default
value if you don’t know what it is, default value is
3.
Data Rate Set the wireless data transfer rate to a certain (5):
value. Since most of wireless devices will negotiate
with each other and pick a proper data transfer
rate automatically, ’it s not necessary to change
this value unless you know what will happen after
modification.
N Data Rate me as above, but only for 802.11n c : Sa(6) lients.
Channel Width Set channel width of wireless radio. (7): Do not modify
the default value if you don’t know what it is,
default setting is ‘ ’.Auto 20/40 MHz 40MHz
provides better network speed for 802.11n wireless
clients. However, if there are 802.11b / g clients
connecting to this N Range ExtenderWireless- , it will
switch to 20MHz mode automatically.
95
Preamble Type (8): The Preamble type defines the length of the CRC
(Cyclic Redundancy Check) block for
communication between the Access Point and
roaming wireless adapters. Do not modify the
default value if you don’t know what it is, default
setting is ‘Short Preamble’.
Broadcast ESSID (9): Decide if the wireless router will broadcast its own
ESSID or not. You can hide the ESSID of your
wireless router (set the option to ‘Disable’), so only
people those who know the ESSID of your wireless
router can get connected.
CTS Protect Enabling this setting will reduce the ch of radio (10): ance
signal collisions between 802.11b and 802.11g/n
wireless access points. It’s recommended to set this
option to ‘ ’ ‘Auto or Always’. However, if you set to
‘ ’None , your wireless router should be able to work
fine, too.
Tx Power 1) (1 : Select the wireless transmitting power level, from
10% to 100%. When wireless clients are not too far
from this , you donWireless-N Range Extender ’t
have to select a higher power level, since this may
cause some individuals to attempt to break into
your wireless network if , you have a bad password
or no password. Select from the drop- down menu.
Default is set at 100%.
96
WMM for Wi 2) (1 : This stands -Fi MultiMedia, will enhance it
the data transfer performance of multimedia
contents when they’re being transferred over
wireless networks. If you don’t know what it is /
not sure if you need it, it s safe to set this option to ’
‘Enable’ ‘Di ’. , however, default value is sable
After you complete the Apply these wireless settings, click ‘ ’ button ,
and the following will be displayed on your web browser:
Click the ‘ ’ Continue button menu;to go back to the previous setup to
continue on router setup, or click the ‘Apply’ button to reboot the router
so the settings will take effect (wait for about 60 seconds while the
router is rebooting).
97
2-7-3 Wireless Security
It’s very important to set wireless security settings properly! If you
don access ’t, hackers and malicious users can reach your network and
valuable data without your and this will cause serious securitconsent y
problems.
To set wireless security settings, click the ‘Wireless’ menu on the
upper right side Security - ‘of the web management interface, then click
Settings , ’ and follow the instructions to set wireless security settings:
S ‘ ’ - elect an encryption method from the Encryption drop down menu,
there are four options:
Disable wireless security
When you select this mode, data encryption is disabled, and every
wireless device in proximity will be able to connect to your wireless
router if no other security measure is enabled (like MAC address access
control - -7- see section 2 4, or disable ESSID broadcast).
Only use this option when you really want to allow everyone to use
your wireless router, and you don’ ’t care if there s someone reads the
data you transfer over the network without your consent.
98
2.7.3.1 - WEP Wired Equivalent Privacy
When you select this mode, the wireless router will use WEP encryption,
and the following setup menu will be shown on your web browser:
Here are descriptions of every setup item:
Key Length (2): There are two s of WEP key length: 64 bit and type -
128 128 64- ‘bit. Using - ’ ’bit is safer than - ’bit , but
will reduce some data transfer performance.
Key Format (3): There are two types of key format: ASCII and Hex.
When you select a key format, the number of
characters of key will be displayed. For example, if
you select ’ - ’ ‘64 bit as key length, and Hex’ as key
format, you’ ‘ll see the message at the right of Key
Format’ ‘is Hex (10 characters), which means the
length of WEP key is 10 characters.
101
Click the ‘ ’ Continue button to go back to the previous setup menu; to
continue on other setup procedures, or click the ‘Apply’ button to
reboot the router so the settings will take effect (wait for about 30
seconds while is rebooting).the router
2.7.3.2 -Wi Fi Protected Access (WPA):
When you select this mode, the wireless router will use WPA encryption,
and the following setup menu will be shown on your web browser:
Here are descriptions of every setup item:
WPA Unicast elect a type of WPA cipher suite S .
Cipher Suite (2): ailable options are: WPA (TKIP), WPA2 (AES), and Av
WPA2 Mixed. You can select any one of them, but
you have to make sure your wireless client supports
the cipher you selected.
Pre- shared Select the type of pre- shared key, you
Key Format (3): can select Passphrase (8 or more alphanumerical
characters, up to 63), or Hex (64 characters of 0-9,
and a- f).
1
2
3
5
4
102
Pre- I shared nput the WPA passphrase.
Key (4): ’ bIt s not recommended to use a word that can e
found in a dictionary due to security reasons.
After you complete the shared key WPA Pre- setting, click the ‘Apply’
button (5) and the following will be displayed on your web browser:
C lick the ‘ ’ Continue button to the go back to previous setup menu; to
continue on other setup procedures, or click the ‘Apply’ button to
reboot the router so the settings will take effect (wait for about 60
seconds while is rebooting).the router
NOTE: Some wireless clients (especially those manufactured before 2003)
only support WEP or WPA (TKIP) cipher. A driver upgrade would be needed
for those clients to use WPA and WPA2 encryption.
103
2.7.3.3 WPA RADIUS:
If you have a RADIUS server, this router can work with it and provide
safer wireless authentication.
Here are descriptions of every setup item:
WPA Unicast Select a type of WPA cipher suite.
Cipher Suite Available options are: WPA (TKIP), WPA2 (AES), and : (2)
WPA2 Mixed. You can select any one of them, but
you have to make sure your wireless client supports
the cipher you selected.
RADIUS Server nput the IP address of your I
IP address (3): Radius authentication server.
RADIUS Server nput the port number of your I
Port (4): Radius authentication server. Default setting is
1812.
RADIUS Server nput the password of your Radius I
Password (5): authentication server.
1
3
4
2
5
6
104
After you complete all settings, click (6) button and the the ‘Apply’
following will be displayed on your web browser:
Click the ‘ ’ Continue button to the go back to previous setup menu; to
continue on other setup procedures, or click the ‘Apply’ button to
reboot the router so the settings will take effect (wait for about 30
seconds while is rebooting).the router
105
2-7-4 Wireless Access Control
This function will help you to prevent unauthorized users from
connecting to your wireless router; only those wireless devices who have
the MAC address you assigned here can gain access to your wireless
router. You can use this function with other security measures described
in previous s section , to create a safer wireless environment.
Up to 20 MAC addresses can be assigned by using this function. C lick the
‘ ’ - Wireless menu on the upper right side of the web management
interface, then click ‘ ’Access Control , and the following will be displayed
on your web browser:
All allowed MAC addresses will be displayed in the ‘MAC Address
Filtering Table’ : (1). Here are descriptions of every setup item
1
2
3
4
6
7
8
9
5
106
Delete (2): If you want to delete a specific MAC address entry,
check the ‘ t’ selec box of the MAC address you want
to delete, and then click ‘the Delete’ button. (You
can select more than one MAC address).
Delete All (3): If you want to delete all MAC addresses listed here,
click the ‘Delete All’ button.
Enable To enforce MAC address filtering, you
Access Control ( have to check Enable Wireless Access Control4 ): ‘ ’.
When this item is unchecked, wireless router the
will not enforce MAC address filtering of wireless
clients.
MAC Address ( Input the MAC address of your wireless devices here, 5 ):
dash ( ) or colon ( : ) are not required.- (i.e. If the
MAC address label of your wireless device indicates
‘ - - - - - ’ ‘ ’aa bb cc dd ee ff or aa:bb:cc:dd:ee:ff , just input
‘aabbccddeeff’.
Comment ( You can input any text here as the comment o6 ): f this
‘ ’ MAC address, like ROOM 2A Computer or
oanything. Y u can input up to 16 alphanumerical
characters here. T is is optional and you can leave it h
blank, however, it’s recommended to use this field
to write a comment for every MAC addresses as a
memory aid.
107
Add ( button to add the MAC address and 7 ‘): Click the Add’
associated comment to the MAC address filtering
table.
Clear ( to remove the value you 8 ‘): Click the Clear’ button
inputted in MAC address and comment field.the
After you complete Apply ‘all settings, click the ’ (9 ) button and the
following will be displayed on your web browser:
Click the ‘ ’ Continue button to go back to the previous setup menu; to
continue on other setup procedures, or click the ‘Apply’ button to
reboot the router so the settings will take effect (wait for about 60
seconds while is rebooting).the router
If you want to reset all the settings in this page back to previously-saved
values ‘ ’ , click the Cancel button.
108
2-7- -5 Wi Fi Protected Setup (WPS)
Wi- a Fi Protected Setup (WPS) is the simplest way to build connection
between wireless network clients and this wireless router. You don’t
have to select the encryption mode and input a long encryption
passphrase every time you need to setup a wireless client, when you
only have to press a button on the wireless client and on this wireless
router, and the WPS will do the rest for you.
This wireless router supports two types of WPS: Push-Button
Configuration (PBC), and PIN code. If you want to use PBC, you have to
push a specific button on the wireless client to start WPS mode, and
switch this wireless router to WPS mode too. You can push the
Reset/WPS button of this wireless router, or click Start PBCthe ‘ ’ button
in the web configuration interface to do this; if you want to use PIN
code, you have to know the PIN code of wireless client and switch it to
WPS mode, then provide the PIN code of the wireless client you wish to
connect to this wireless router. The detailed instructions are listed as
follows:
Click the ‘ ’ at Wireless menu the top of the web management interface,
then click , and the following will be displayed on your web ‘WPS’
browser:
109
Here are descriptions of every setup item:
Enable WPS (1) Check this box to enable WPS function, uncheck : the
it to disable WPS.
WPS -Information (2):WPS related system information will be displayed
here:
WPS Status: If the wireless security (encryption)
function of this wireless outer is properly set, your ’ll
see ‘ ’ Configured message here. If wireless security
f ‘ . unction has not been set, you’ll see unConfigured’
5
4
2
1
3
110
P C in ode Self: This is the WPS PIN code of this
wireless router. This code is useful when you need
to build wireless connection by WPS with other a
WPS-enabled wireless devices.
SSID: The SSID of this w outer will be ireless r
displayed here.
Authentication Mode: The wireless security
authentication mode of this wireless router will be
displayed here. If you don t enable ’ the security
function of the outer before WPS is w rireless
activated, the router will auto set the security to
WPA (AES ) and generate a set of passphrase key for
WPS connection.
Passphrase Key: The wireless security key of the
router will be displayed here.
Config Mode (3):Select Registrar or Enrollee from the drop down-
m . enu
Configure by ‘ ’ - Click Start PBC to start the Push Button style WPS
Push Button ( setup procedure. This wireless 4): router will wait for
WPS requests from clients for 2 minutes. wireless
The ‘ ’ WLAN LED on the wireless router will be
steady on for 2 minutes when this wireless outer is r
waiting for incoming WPS request.an
112
2-7-6 Security Tips for a Wireless Network
Here are some quick tips to help you improve the security level of your
wireless network:
1. Never use simple words (like school, ap computer) as ple or the WEP
encryption or WPA passphrase.
2. A complicated (combination of number , even symbol , and s, letters s
long enough) WEP key and WPA passphrase is much safer than
simple and short ones. Remember that the wireless client is capable
of k eeping the key or passphrase for you, so you only have to input
the complicated key or passphrase once. It’s not too troublesome but
will greatly improve the security level.
3. You can hide the ESSID of this router by setting ‘the Broadcast ESSID’
option to ‘Disable’. Your wireless router will not be found by other
people in proximity if they re just using the AP scanning ’ function of
their wireless client, and this can reduce the chance of being
intruded.
4. Use ‘ ’ -7-the Access Control function described in section 2 4, so those
people who are not in your list will not be able to connect to your
network.
113
Chapter III Advanced Functions
3-1 Quality of Service (QoS)
Quality of service provides an efficient way for computers on the
network to share the Internet bandwidth with a promised quality of
Internet service. Without QoS, all computers and devices on the network
will compete with each other to get Internet bandwidth, and some
applications which require bandwidth (like video streaming guaranteed
and network telephone) will be affected, therefore an unpleasing result
will occur, like the interruption of video / audio transfer.
With this function, you can limit the maximum bandwidth or give a
guaranteed to bandwidth a specific computer.
114
3-1-1 Basic QoS Settings
Follow the instructions below to set QoS parameters:
Click the ‘ ’ Qos menu on the left of the general setup interface and the
following will be displayed on your web browser:
Here are descriptions of every setting:
Enable QoS (1): Check this box to enable QoS function, unselect the
this box if you don t want to enforce QoS ’
bandwidth limitations.
Total Download You can set the limit of total download
Bandwidth (2): bandwidth in kbits. To disable download bandwidth
limitation, input ‘0’ here.
1
2
3
4
5
6
7
8
9
10
11
115
Total Upload You can set the limit of total upload
Bandwidth (3): bandwidth in kbits. To disable upload bandwidth
limitation, input ‘0’ here.
Current QoS All existing QoS rules will be displayed here.
Table (4):
Add (5): ‘ ’ Click the add button to add a new QoS rule, see
section 3-1-2 ‘ ’ Add a new QoS rule below.
Edit (6): If you want to modify the content of a specific rule,
check the ‘ ’ select box of the rule you want to edit,
then click ‘ ’ the Edit button. Only one rule should be
s elected at a time! ’If you didn t select a rule before
clicking ‘ ’ the Edit button, you’ll be prompted to add
a new rule.
Delete (7): You can delete selected rules by clicking this
button. You can select one or more rules to delete
by check the box of the rule(s) you ing ‘ ’ the select
want to delete. If the QoS table is empty, this
button will be grayed out and cannot be clicked.
Delete All (8): By clicking this button, you can delete all rules
currently in the QoS table. If the QoS table is
empty, this button will be grayed out and cannot
be clicked.
Produktspezifikationen
| Marke: | Comtrend |
| Kategorie: | Router |
| Modell: | WR-5881 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Comtrend WR-5881 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Router Comtrend
30 August 2024
30 August 2024
21 August 2023
29 Oktober 2022
Bedienungsanleitung Router
- Router Acer
- Router Anker
- Router Apple
- Router Approx
- Router Asus
- Router Belkin
- Router BenQ
- Router Exibel
- Router Gembird
- Router Gigabyte
- Router Hama
- Router HP
- Router LogiLink
- Router Manhattan
- Router Medion
- Router Sweex
- Router Trust
- Router Clas Ohlson
- Router Cotech
- Router Makita
- Router Roland
- Router ZyXEL
- Router Bosch
- Router Alfa
- Router Siemens
- Router Buffalo
- Router TechniSat
- Router Allnet
- Router Devolo
- Router Eminent
- Router Linksys
- Router Netgear
- Router Telekom
- Router König
- Router Renkforce
- Router Thomson
- Router Black And Decker
- Router Skil
- Router Kenwood
- Router Schneider
- Router DeWalt
- Router Einhell
- Router Festool
- Router Topcom
- Router Nilox
- Router Motorola
- Router Nokia
- Router Vivanco
- Router Xiaomi
- Router EZVIZ
- Router Hikoki
- Router Hitachi
- Router Strong
- Router TCL
- Router Metabo
- Router Zoom
- Router Güde
- Router Netis
- Router Aruba
- Router Lindy
- Router Thrustmaster
- Router MSI
- Router Mercusys
- Router Razer
- Router TRENDnet
- Router Sagem
- Router Sigma
- Router Western Digital
- Router AVM
- Router Milan
- Router Zebra
- Router EnVivo
- Router TP-Link
- Router Kathrein
- Router Silverline
- Router Holzmann
- Router Alcatel
- Router Vtech
- Router Black Box
- Router Techly
- Router Barco
- Router Hercules
- Router Milwaukee
- Router Toolcraft
- Router Huawei
- Router JUNG
- Router Nest
- Router Edimax
- Router DrayTek
- Router Eumex
- Router Technicolor
- Router Totolink
- Router Kogan
- Router Peak
- Router Sagemcom
- Router Conceptronic
- Router D-Link
- Router T-Mobile
- Router I-Tec
- Router QNAP
- Router Icidu
- Router Vodafone
- Router Powerplus
- Router Digitus
- Router Lancom
- Router LevelOne
- Router Beafon
- Router Phicomm
- Router ZTE
- Router Cisco
- Router Sonos
- Router Tenda
- Router Kasda
- Router Foscam
- Router Ubiquiti Networks
- Router Synology
- Router Kopul
- Router Kramer
- Router Intellinet
- Router Asrock
- Router AJA
- Router Hikvision
- Router Patton
- Router Nexxt
- Router Planet
- Router AT&T
- Router EnGenius
- Router Mikrotik
- Router Teltonika
- Router Porter-Cable
- Router Google
- Router Davolink
- Router Digi
- Router Digiconnect
- Router KPN
- Router Leoxsys
- Router Media-tech
- Router Mercku
- Router On Networks
- Router PENTAGRAM
- Router Proximus
- Router Sitecom
- Router SMC
- Router T-com
- Router Tele 2
- Router Telstra
- Router Ubee
- Router United Telecom
- Router UPC
- Router Verizon
- Router Wintec
- Router Wisetiger
- Router Zolid
- Router Vimar
- Router Cudy
- Router Siig
- Router Moxa
- Router RGBlink
- Router Iogear
- Router StarTech.com
- Router Kraun
- Router AirLive
- Router Smart-AVI
- Router Dahua Technology
- Router ModeCom
- Router Gefen
- Router Atlantis Land
- Router BT
- Router Cradlepoint
- Router Multitech
- Router Arris
- Router ATen
- Router KanexPro
- Router SPL
- Router Advantech
- Router RAVPower
- Router Digicom
- Router Juniper
- Router BZBGear
- Router Brickcom
- Router 3Com
- Router B&B Electronics
- Router Eero
- Router Atlona
- Router Xantech
- Router WyreStorm
- Router AVMATRIX
- Router Alfatron
- Router Key Digital
- Router Rosewill
- Router HiRO
- Router Ocean Matrix
- Router Hamlet
- Router AVPro Edge
- Router Blustream
- Router Dovado
- Router Readynet
- Router Accelerated
- Router Mach Power
- Router ComNet
- Router MuxLab
- Router EXSYS
- Router Avenview
- Router Netcomm
- Router Allied Telesis
- Router A-NeuVideo
- Router Sixnet
- Router OneAccess
- Router Hawking Technologies
- Router Cambium Networks
- Router Lantronix
- Router Sabrent
- Router F-Secure
- Router Keewifi
- Router Shinybow
- Router Starlink
- Router Keenetic
- Router Lumantek
- Router Actiontec
- Router Billion
- Router LTS
- Router Intelix
- Router Arcadyan
- Router 7inova
- Router Nexaira
- Router FSR
- Router Amped Wireless
- Router Ruckus Wireless
- Router Premiertek
- Router GL.iNet
- Router Edgewater
- Router Milesight
- Router PulseAudio
- Router Predator
- Router Comprehensive
- Router Digitalinx
- Router Luxul
- Router Silentwind
- Router Keezel
Neueste Bedienungsanleitung für -Kategorien-
3 Dezember 2024
2 Dezember 2024
2 Dezember 2024
2 Dezember 2024
2 Dezember 2024
1 Dezember 2024
1 Dezember 2024
30 November 2024
29 November 2024
16 Oktober 2024