Comtrend PowerGrid PG-9172 Bedienungsanleitung

Comtrend Powerline adapter PowerGrid PG-9172

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Comtrend PowerGrid PG-9172 (4 Seiten) in der Kategorie Powerline adapter. Dieser Bedienungsanleitung war fĂĽr 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
1
Quick Install Guide
PG-9172 | G.hn Powerline Adapter
A
Understanding the Powerline Adapter
Network Indicator
Displays Connection Strength
Displays Network Status
Connection is Secure When Lit
Configuration Button
(Enables Device Synchronization)
Connection Indicator
Security Indicator
B
Initial Device Setup
NOTE: A minimum of two G.hn Powerline Adapters are required to create a proper connection. Follow
Steps 1-4 to add additional G.hn Adapters to your network.
1.Plug the Powerline Adapter into the power outlet.
FOR PRESS USE ONLY
2
Note: For maximum performance, please plug the Powerline Adapter
directly into the wall outlet. Do not plug into a power strip or surge
protector, as network performance could degrade significantly.
2. Connect the Powerline Adapter to a network device with an Ethernet
(RJ-45) cable. (Wait 10 seconds for Network Indicator to light up GREEN
which indicates a good connection, a flashing GREEN light indicates that the
device is sending data).
Network Device
(Modem, Router, or Access Point)
Ethernet Cable
C
Device Connection
3. Plug the additional Powerline Adapter into a power outlet near the
Internet-enabled device (ex. TV, PC, STB, DVR, etc.).
4. Connect the Powerline Adapter to the device with an Ethernet cable.
(The Connection Indicators and Network Indicators
on the front of
both Powerline Adapters should be
GREEN representing a strong
connection).
3
D
Security Setup
Note: G.hn Adapters will automatically connect in “non-secure”
mode. It is highly recommended to follow Steps 5 and 6 to create
a secure connection.
5. Press the “Config” Button for 3 seconds till you see the Security
Indicator start flashing GREEN on EACH of the Powerline Adapters
you want to be “connected.” (The Security Indicator will light up
GREEN when successfully connecte d AND the Connection Indicator
on the front of the Powerline Adapter should be solid GREEN when
they are paired ~ representing a strong connection).
6. Repeat Steps 3 to 5 to add additional adapters/devices. Please
note that up to 16 devices can be connected to a Powerline G.hn
Netwo rk.


Produktspezifikationen

Marke: Comtrend
Kategorie: Powerline adapter
Modell: PowerGrid PG-9172

Brauchst du Hilfe?

Wenn Sie Hilfe mit Comtrend PowerGrid PG-9172 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Powerline adapter Comtrend

Bedienungsanleitung Powerline adapter

Neueste Bedienungsanleitung fĂĽr -Kategorien-