Code Corporation Code Reader 2.0 Bedienungsanleitung

Code Corporation Barcode-Leser Code Reader 2.0

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Code Corporation Code Reader 2.0 (67 Seiten) in der Kategorie Barcode-Leser. Dieser Bedienungsanleitung war für 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/67

C001537_18_CR2_User_Manual 1

Save Settings

Manual Version 18

This version of the manual released with rmware version 4058. 3/24/09Release Date:

User Manual

Code Reader 2.0™

C001537_18_CR2_User Manual

C001537_18_CR2_User_Manual i

Save Settings

Statement of Agency Compliance

The CR2 can be set to use targeting lasers. The CR2’s targeting laser emits Class 2M

radiation outside of the product per IEC 60825-1. Class 2M Laser/LED product. Do not stare into beam or view directly

with optical instruments.

The CR2 has been tested by an independent electromagnetic compatibility laboratory in accordance with the applicable

specications and instructions.

The CR2 has been tested for compliance with FCC regulations and was found to be compliant with all

applicable FCC Rules and Regulations.

IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, this device must not be

co-located or operate in conjunction with any other antenna or transmitter.

CAUTION: Changes or modications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

The CR2 has been tested for compliance to CE standards and guidelines and was found to conform to

applicable CE standards, specically the EMC requirements EN 55024, ESD EN 61000-4-2, Radiated RF

Immunity EN 61000-4-3, ENV 50204, EFT EN 61000-4-4, Conducted RF Immunity EN 61000-4-6, EN

55022, Class B Radiated Emissions, and Class B Conducted Emissions.

Laser/LED Radiation

Wavelength: <1mW

Maximum Output: 650-700 nm

Laser Pulse Duration: 0.977 mSec.

LED Pulse Duration: 0.255 uSec.

A Warning Label (see left) is located on the underside of the CR2 near

the battery locking mechanism as pictured (see right).

Code voids product warranty if the hard case has been opened or tampered with

in any way. Opening the case may put the user at risk of laser radiation exposure

(Class 3R). A second Warning Label (see left) is placed within the casing struc-

ture as pictured (see right).

Caution – Use of controls or adjustments, or performance of procedures other

than those specied herein may result in hazardous radiation exposure.

In addition, a CB Test Certicate has been issued by the National Certication

Board (NCB) indicating Code Reader 2.0 (CR2) meets all safety and quality stan-

dards in accordance to IEC 60950-1:2001, First Edition.

Enlarged for

readability

Enlarged for

readability

Laser aperature

37AW

E300884

CAUTION - CLASS 3R

LASER RADIATION

WHEN OPEN

AVOID DIRECT EYE

EXPOSURE

C001537_18_CR2_User_Manual ii

Save Settings

Code Reader 2.0 User Manual

The software described in this manual may only be used in accordance with the terms of its license agreement.

No part of this publication may be reproduced in any form or by any means without written permission from Code

Corporation. This includes electronic or mechanical means such as photocopying or recording in information storage and

retrieval systems.

NO WARRANTY. This technical documentation is provided AS-IS. Further, the documentation does not represent a

commitment on the part of Code Corporation. Code Corporation does not warrant that it is accurate, complete or error

free. Any use of the technical documentation is at the risk of the user. Code Corporation reserves the right to make

changes in specications and other information contained in this document without prior notice, and the reader should in

all cases consult Code Corporation to determine whether any such changes have been made. Code Corporation shall

not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages

resulting from the furnishing, performance, or use of this material. Code Corporation does not assume any product liability

arising out of or in connection with the application or use of any product or application described herein.

NO LICENSE. No license is granted, either by implication, estoppel, or otherwise under any intellectual property rights

of Code Corporation. Any use of hardware, software and/or technology of Code Corporation is governed by its own

agreement.

The following are trademarks or registered trademarks of Code Corporation:

CodeXML, Maker, QuickMaker, CodeXML Maker, CodeXML Maker Pro, CodeXML Router, CodeXML Client SDK,

CodeXML Filter, HyperPage, CodeTrack, GoCard, GoWeb, ShortCode, GoCode, Code Router, QuickConnect Codes

All other product names mentioned in this manual may be trademarks of their respective companies and are hereby

acknowledged.

The software and/or products of Code Corporation include inventions that are patented or that are the subject of patents

pending. U.S. Patents: 6997387, 6957769, 7428981, 6619547, 6736320, 7392933, 7014113, 7240831, 7353999,

7519239, 7204417, 6942152, 7036735, 7070091, 7097099, 7621453

The Code Reader software uses the Mozilla SpiderMonkey JavaScript engine, which is distributed under the terms of the

Mozilla Public License Version 1.1. Source code for this version of Spider Monkey is available at:

http://www.codecorp.com/source/spidermonkey.

The Code Reader software is based in part on the work of the Independent JPEG Group.

Code Corporation, 14940 S. Pony Express Road, Suite 500, Bluffdale, UT 84065

www.codecorp.com

Produktspezifikationen

Marke:	Code Corporation
Kategorie:	Barcode-Leser
Modell:	Code Reader 2.0
GPS:	Nein
Bluetooth:	Ja
Breite:	46 mm
Tiefe:	109 mm
Gewicht:	71.5 g
Produktfarbe:	Schwarz
Höhe:	33 mm
Betriebstemperatur:	0 - 50 °C
Relative Luftfeuchtigkeit in Betrieb:	5 - 95 %
Zertifizierung:	CE, FCC, RoHS
Temperaturbereich bei Lagerung:	-20 - 65 °C
Energieverbrauch:	350 mA
Wellenlänge:	650 nm
Maximaler Arbeitsabstand:	10 m
Sensor-Typ:	CMOS
Maximale Reichweite:	0.228 m
Stoßfest:	Nein
Maximaler Scanbereich:	67 x 305 mm
Gierlesewinkel:	-60 - 60 °
Steigungslesewinkel:	-60 - 60 °
Neigungslesewinkel:	-180 - 180 °
Schlüsselanzahl:	2 Schlüssel
Optische Sensor-Auflösung:	1024 Pixel