Cobra CWR200 Bedienungsanleitung

Cobra Radio CWR200

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Cobra CWR200 (3 Seiten) in der Kategorie Radio. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

WEATHER

W A R N I N G

W AT C H

A D V I S O R Y

Meet Cobra’s Handheld Weather Radio.

Learn how to use the CWR200 to stay up to date on

extreme emergency related events.

Manual

Printed in China Part No. 480-928-P Version C

CWR200 Display

NOTE: This device complies with part 15 of FCC rules: Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) This device must accept any

interference received including interference that may cause undesired operation.

CAUTION: Modications or parts not approved by Cobra Electronics Corporation may violate FCC

Rules and void authority to operate this equipment.

This device complies to Canadian Standard ICES-003.

CAN ICES-3B/NMB-3B.

This device complies with RSS-310 of Industry Canada. Operation is subject to the condition that this

device does not cause harmful interference.

The manufacturer is not responsible for any radio or TV interference caused by unauthorized

modications to this equipment. Such modications could void the user’s authority to operate

the equipment.

CWR200

1. Antenna

2. External Headphone/

Micro-USB Charge Jack

3. USB Out

4. LED Status Indicator

5. Power/Menu Button

6. Channel Up/Down Buttons

7. Backlit LCD Display

8. Speaker

9. ButtonsVolume Up/Down

10. LED Flashlight Button

11. Weather/Snooze Button

12. Tornado Mode Button

13. Select/Enter Button

14. Wrist Strap Hole

15. Belt Clip

16. Battery Compartment

17. Battery Door Latch

18. Rubberized Grips

19. LED Flashlight

1. Battery Level Indicator

2. Weather Alert Icon

3. Signal Strength Indicator

4. USB Charge Indicator

5. Alarm Icon

6. Speaker Volume Icon

7. Weather Channel

8. S.A.M.E. Message Type

9. Dot Matrix LCD Display

6 7

Set Up

Carrying your CWR200 radio with you is easy when

using the belt clip or optional wrist strap. The belt

clip easily attaches to your belt, purse, or backpack.

Installing Batteries

1. Remove belt clip by releasing belt clip

latch and sliding clip up.

2. Pull up on the battery door latch to remove the

battery compartment cover. Remove and dispose

of white anti-theft device.

3. Insert the supplied three AA rechargeable batteries

or non-rechargeable alkaline batteries. Position

batteries according to polarity markings.

4. Replace battery compartment cover and

belt clip.

Power On and Set the Time

1. Press and hold the button Power/Menu

to turn on the radio.

2. Use the button till you Power/Menu

reach “Set Time” and press .Select

3. Press the and buttons to adjust the hours then Up Down

press .Select

4. Use the same procedure to set the minutes and or .AM PM

5. Press Select to save that time.

To Charge Batteries in Radio

1. Check to see that the batteries have been inserted

properly.

2. Insert the cable into the charge jack located at the

top of the radio.

3. Plug the cable into USB power source.

Use only the supplied rechargeable batteries and charger for recharging

your Cobra weather radio.

To Charge Weather Radio in Desktop Charger

1. Insert radio into desktop charger as shown.

2. Insert the micro-USB cable into jack on the back of

the charger.

3. Plug the cable into a power source. For pluggable

equipment, the socket-outlet should be installed near the

equipment and should be easily accessible.

If charging light is not on, check position of the the radio.

Radio should be upright. The charge indicator light will stay

on as long as the radio is in the charging well, and the light

will go off when the charging is complete.

Battery Low

When battery power is low, the final bar in the

Battery Low icon will blink and an audible tone

will sound before the radio shuts off. Your batteries

should be replaced or recharged, if using rechargeable

batteries.

Note: The radio will display flashing battery icon while

charging.

To Select a Channel

You will find a very useful expanded information about the NOAA

broadcast system at: http://www.nws.noaa.gov/nwr/

NOAA Weather Radio All Hazards (NWR) is a nationwide network of radio

stations broadcasting continuous weather information from the nearest

National Weather Service office. NWR broadcasts official warnings,

watches, forecasts and other hazard information 24 hours a day, 7 days

a week.

The National Oceanographic and Atmospheric Administration has over

900 broadcast stations. NWR “Broadcast Service Area” coverage by

State and coverage maps can be found at this link: http://www.nws.

noaa.gov/nwr/listcov.htm.

Environment Canada also maintains an alert system compatible with

this alert radio and full information on that system can be found at:

http://ec.gc.ca/meteo-weather/

1. Use the or Channel Up Channel Down

buttons to change the channel.

2. Typically you will tune to the strongest and

best sounding channel. This will often be

the closest channel with the most localized

weather information.

3. Listen to the selected channel and cross check the NWR “Broadcast

Service Area” information on the website to make sure this is the

best channel for your needs.

Notes:

• Antenna performance is a function of local conditions,

causing signals to be stronger signal level in some directions

than others.

• Seasonal environmental conditions, such as icing or heavy rain,

affect performance of a transmitter station and its various compo-

nents, particularly those subject to continuous weather exposure.

To Adjust Volume

You can adjust the volume to best fit your needs. You can set the radio

for “silent standby” by adjusting the volume level all the way down to the

lowest level. This will allow you to sleep or just get some peace and quiet

while the radio monitors for applicable alerts in the background.

1. Volume Up Volume Down Use the or buttons

to change the volume level.

2. The level will be shown on the display.

3. Just leave the radio for a few seconds and

that volume level will be saved.

Notes:

• Any alerts received (which are not filtered by S.A.M.E. or Tornado

Mode) will override the volume setting and alert at full volume.

• Your monitoring preference must be set according to the S.A.M.E.,

Weather Alert and other sections of this manual to properly receive

alerts.

Understanding S.A.M.E. (Specic Area Message

Encoding) & Alerts

The CWR200 is an advanced Weather and Emergency Alert Radio capable

of receiving and decoding S.A.M.E. notifications. It alerts to over 60

emergency related events such as tornados, hurricanes, blizzards, natural

disasters, child abductions, civil emergencies, etc. When an alert occurs

and the proper setup has been completed; lights come on, sirens sound,

and messages are displayed in text on the CWR200 to make sure you are

in the know and prepared.

When an NWR office broadcasts an Advisory, Watch or Alert, it also

broadcasts a digital SAME code that may be heard as a very brief static

burst. This SAME code contains digital information such as; the type of

message, county(s) affected, message expiration time, etc. If this radio

is programmed correctly, the alert will sound and will include the 1050

Hz warning alarm tone (as an attention signal), followed by the broadcast

message and finally a voice announcement about the alert. At the end of

the broadcast message, you will hear a brief digital end-of message static

burst followed by a resumption of the NWR broadcast cycle.

Note- Any alerts received (which are not filtered by S.A.M.E. or Tornado

Mode) will override the volume setting and alert at full volume. Press the

Weather Snooze button to temporarily silence the alarm. You can review

multiple S.A.M.E. messages by pressing the button.Select

This Weather and Alert Emergency radio is set to have S.A.M.E. mode ON

by default. However, it is set with the default six zeroes (000000) saved

into Memory Location 1. This default FIPS code of 000000 will allow

the radio to alert (visual and audible) to emergencies in all areas within

receiving distance of the tuned radio channel. If you travel frequently

with the radio and do not wish to set FIPS codes as you travel then you

may leave the default 000000.

For effective use of the S.A.M.E. local alert filtering system (for less false

alerts or alerts not applicable to your local area) you can program in FIPS

codes that will filter alerts only applicable for your designated area.

Know Your Lights

• Advisory (Yellow Light) - For less serious

conditions than Warnings and Watches.

• Watch (Orange Light) - Risk of Hazardous

Weather or hydrologic events has increased

signicantly, but occurrence, location and time

is uncertain.

• Warning (Red Light) -

Hazardous Weather

or hydrologic events is occurring, imminent or likely.

Set Up S.A.M.E. and Memory Codes

The Mode is set to by default. If it is not ON then you can turn SAME ON

it ON by:

1. Press the button until Power/Menu SET SAME

is shown.

2. Press the button to show or Select ON OFF.

3. Press the or buttons until ON is shown.Up Down

4. Press Select SAME ON to turn Mode .

To receive S.A.M.E. notifications filtered for your area, you’ll need to get

and enter your 6 digit S.A.M.E. FIPS Code. Coverage areas are defined

within the “NWR Broadcast Service Area” and are comprised of named

counties, boroughs, metropolitan areas or portions thereof. Write down

and record your local codes once you find them.

These codes can be found at:

In the US:

• Visit http://www.nws.noaa.gov/nwr/indexnw.htm or

• Call the National Weather Service Toll-Free Number at

1-888-697-7263

In Canada:

• Visit http://ec.gc.ca/meteo-weather or

• Call Environment Canada’s Meteorological Service Toll-Free number

at 1-877-789-7733

Note:

This radio has 25 Memory Locations for so you can save up to 25 FIPS

locations you would like it to alert in. For example, this could be the

locations for home, work, cabin, marina, vacation, etc. If you do not

have a FIPS code for these areas OR the default 000000 is not entered

then the radio will NOT alert.

Note:

Alerts for areas outside the programmed FIPS codes will

NOT ALERT.

1 2 3 4 5

6 7 8 9 10

To enter the S.A.M.E. FIPS codes into the

memory locations:

1. Power/Menu Press the button until SET MEMORY

is shown.

2. Press the button to the Memory Location. Select

For example, MEMORY 01.

Press the button to choose that Select

Memory Location or press the or Up Down

buttons to select another Memory Location.

For example, , etc.Memory 02, Memory 03

4. Up Down Select Press the , and buttons to enter all 6

digits of the FIPS code.

5. The ON and OFF selection for that FIPS Code will then

be blinking. Press the button to select if you Up ON

want to receive alerts for this area.

6. The next Memory Location will then be shown.

Repeat these steps for up to 25 FIPS location codes.

7. When done entering your FIPS codes, press the button to save Menu

the changes and move onto the rest of the setup menu.

Notes:

• Most users will only enter 1-5 FIPS codes.

• Make sure the Memory Location’s FIPS code it set to ON if you want

to receive alerts for that location. For your convenience, they can

be set to ON or OFF in case you travel between local areas and only

want to receive the applicable alerts for your location. If it is set to

OFF then you will not receive alerts for that area.

• You can leave multiple and/or all the FIPS codes set to ON and this is

probably the most common and best practice.

Set Up Simple NOAA Weather & Emergency Alert Mode:

This radio can also be set to just receive all 1050 Hz alert tone

generated weather alerts. This is a simple mode of operation and it

will alert to all emergencies which broadcast this tone. The option to

turn this ON will appear in the menu only if SAME is turned OFF.

For example, you might want to use this mode if your radio is set with

SAME codes for home use and then you decide to take it on a road trip.

You can leave those Memory Location programmed and just turn SAME

MODE off and WX Alert mode ON. The radio will now receive all alerts.

To turn Weather Alert Mode ON or OFF:

1. Power/MenuPress the

button until is SET SAME

shown.

2. SelectPress the button to

show .ON or OFF

3. Up Down OFF .Press the or buttons until is shown

4. Select SAME OFF.Press to turn Mode

5. SET WX ALERT will now

appear on the display.

Press Select and ON or

OFF . will show

6. DownPress the or Up

button to select or ON OFF.

7. Select .Press to choose your setting

Notes:

• The SET WX ALERT will only show in the menu if SET SAME has

been turned OFF. If SET SAME is turned ON again then the SET WX

ALERT will disappear (not show) from the menu until the next time

SET SAME is turned OFF.

• If both Weather Alert Mode and SAME Mode are turned OFF then

you will not receive any alerts. You can continue to listen to the

weather and emergency channels but you will not receive any alerts

(overriding the volume), colored lights or text notifications about the

alert levels and types.

Set Up Tornado Mode:

This radio has something special called the . It allows Tornado Mode

you to block the audio alerts from many common, but maybe unwanted

alerts during the night and other times when you would prefer less

alerting. If the is turned on, the radio continues to Tornado Mode

receive and log the alerts but the alarm will not sound and it will not

switch to the broadcast voice audio. The radio’s visual alerts (light and

message) will continue to display. The Tornado Mode will be indicated

on the display as and . If is set to BLOCK ON BLOCK OFF BLOCK ON,

all incoming alerts will be detected and will be “silenced” except for

tornados and other extreme emergencies*.

To turn BLOCK ON or BLOCK OFF:

1. Press the Tornado Mode button to

select .ON or OFF

2. Just leave the radio for a few seconds

and that Tornado Mode setting will be

saved.

If the Tornado Mode is enabled, the display continuously alternates

between the clock time and showing . If the Tornado Mode is BLOCK ON

disabled (BLOCK OFF), then no message regarding Tornado Mode status

will be shown.

*Extreme emergencies that will not be silenced using the Tornado Mode (Block ON)

include extreme emergencies like; Biological Hazard Warning, Civil Danger Warning,

Civil Emergency Message, Chemical Hazard Warning, Contaminated Water Warning,

Dam Break Warning, Contagious Disease Warning, Emergency Action Notification,

Emergency Action Termination, Earthquake Warning, Immediate Evacuation, Food

Contamination Warning, Hazardous Materials Warning, Hurricane Warning, Industrial

Fire Warning, Local Area Emergency, Law Enforcement Warning, Landslide Warning,

Nuclear Power Plant Warning, Radiological Hazard Warning, Shelter-In Place Warning,

Tornado Warning, Tropical Storm Warning, Tsunami Watch, Tsunami Warning, Volcano

Warning and Wild Fire Warning.

Setting an Alarm:

If you have already set the time, then you can also use it to set an alarm.

This radio can be used as an alarm clock.

1. Power/MenuPress the button until is SET ALARM

shown.

2. Select ON OFFPress the button to show or .

3. Up Down ONPress the or buttons until is shown and

then press Select. The last set alarm time will be

shown with the hour setting blinking.

4. Up DownPress the and buttons to adjust the hour and

press .Select

5. Use the same procedure to set the minutes and AM

or PM.

6. SelectPress to set the alarm for that time.

An alarm icon will show up on the display to let you know

an alarm is active and waiting to go off. When the alarm

sounds, press the button to snooze the Weather Snooze

alarm for 5 minutes. The alarm must be turned off in

the menu to permanently silence the alarm.

LED Flashlight

Press and release the LED

Flashlight button to use the LED

flashlight located at the bottom of

the radio.

LED Flashlight Button

Turning Key Tones ON or OFF:

When Key Tone is ON, an audible tone will sound each time a button is

pressed. To turn turn Key Tones ON or OFF:

1. Power/MenuPress the button until is SET KEY TONE

shown.

2. Select ON OFFPress the button to show or .

3. Up Down ON OFFPress the or buttons until or is

shown and then press Select.

4. Select Press to confirm your choice.

Charging a USB Device

1. To turn USB Charging .ON

2. Press the button until you reach Power/Menu

“ ”.SET CHARGING

3. Press the button to choose between Select

“ON” and “OFF” position.

4. Once on, you will see the USB icon in

the display.

5. Connect a USB compatible device into the

charging port located on the side of the radio.

6. Once connected, the radio will act as an external

power source to charge the desired device.

WEATHER

WARNING

W A T C H

A D VI S O R Y

Connecting a USB-compatible device

to the CWR200 to charge

Customer Assistance

Should you encounter any problems with this product, or not understand its

many features, please refer to this owner’s manual. If you require further

assistance after reading this manual, Cobra Electronics offers the following

customer assistance services:

For Assistance in the U.S.A.

Automated Help Desk:

English only. 24 hours a day, 7 days a week, phone 773-889-3087.

Customer Assistance Operators:

English and Spanish. 8:00 a.m. to 5:30 p.m. Central Time, Monday through

Friday (except holidays), phone 773-889-3087.

Questions:

English and Spanish. Faxes can be received at 773-622-2269.

Technical Assistance:

English only. www.cobra.com (on-line: Frequently Asked Questions).

English and Spanish. productinfo@cobra.com (e-mail).

For Assistance Outside the USA:

Contact Your Local Dealer

Trademark Acknowledgement

Cobra® and the snake design are registered trademarks of Cobra

Electronics Corporation, USA.

Cobra Electronics Corporation™ is a trademark of Cobra Electronics

Corporation, USA.

All other trademarks and trade names are those of their respected

owners.

Limited 1-Year Warranty

For Products Purchased in the U.S.A.

Cobra Electronics Corporation warrants that its weather radios, and the

component parts thereof, will be free of defects in workmanship and

materials for a period of one year from the date of rst consumer

purchase. This warranty may be enforced by the rst consumer

purchaser, provided that the product is utilized within the U.S.A.

Cobra will, without charge, repair or replace, at its option, defective

weather radios, products or component parts upon delivery to the Cobra

Factory Service Department, accompanied by proof of the date of rst

consumer purchase, such as a duplicated copy of a sales receipt.

You must pay any initial shipping charges required to ship the product

for warranty service, but the return charges will be at Cobra’s expense, if

the product is repaired, this warranty gives you specic rights, and you

may also have other rights which vary from state to state.

Exclusions: This limited warranty does not apply:

1. To any product damaged by accident.

2. In the event of misuse or abuse of the product, or as a result of

unauthorized alterations or repairs.

3. If the serial number has been altered, defaced or removed.

4. If the owner of the product resides outside the U.S.A.

All implied warranties, including warranties of merchantability and

tness for a particular purpose are limited in duration to the length of

this warranty.

Cobra shall not be liable for any incidental, consequential or other

damages; including, without limitation, damages resulting from loss of

use or cost of installation.

Some states do not allow limitations on how long an implied warranty

lasts and/or do not allow the exclusion or limitation of incidental or

consequential damages, so the above limitations may not apply to you.

Product Service

For any questions about operating or installing this new Cobra product, or

if parts are missing… …do not return this PLEASE CALL COBRA FIRST

product to the store. If this product should require factory service, please

call Cobra before sending the product. This will ensure the fastest turn-

around time on any repair. If Cobra asks that the product be sent to

its factory, the following must be furnished to have the product serviced

and returned:

1. For Warranty Repair include some form of proof-of-purchase, such as

a mechanical reproduction or carbon of a sales receipt. Make sure the

date of purchase and product model number are clearly readable. If

the originals are sent, they cannot be returned;

2. Send the entire product;

3. Enclose a description of what is happening with the product. Include a

typed or clearly printed name and address of where the product is to

be returned, with phone number (required for shipment);

4. Pack product securely to prevent damage in transit. If possible, use

the original packing material;

5. Ship prepaid and insured by way of a traceable carrier such as United

Parcel Service (UPS) or Priority Mail with delivery conrmation to

avoid loss in transit to: Cobra Factory Service, Cobra Electronics

Corporation, 6500 West Cortland Street, Chicago, Illinois 60707

U.S.A.;

6. If the product is in warranty, upon receipt of the product it will either

be repaired or exchanged depending on the model. Please allow

approximately 3 – 4 weeks before contacting Cobra for status. If the

product is out of warranty, a letter will automatically be sent with

information as to the repair charge or replacement charge.

For any questions, please call 773-889-3087 for assistance.

OUT

Channel Availability

The radio is capable of receiving and successfully decoding signals on the

following frequencies:

Channel Frequency

1 162.400 MHz

2 162.425 MHz

3 162.450 MHz

4 162.475 MHz

5 162.500 MHz

6 162.525 MHz

7 162.550 MHz

11 12 13 14 15

16 17 18 19 20

Produktspezifikationen

Marke:	Cobra
Kategorie:	Radio
Modell:	CWR200

Brauchst du Hilfe?

Wenn Sie Hilfe mit Cobra CWR200 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Radio Cobra

Cobra ACXT360 Bedienungsanleitung

5 September 2024

Cobra 19DXIVEU Bedienungsanleitung

1 September 2024

Cobra 75 All Road Bedienungsanleitung

29 August 2024

Cobra MR F45-D Bedienungsanleitung

25 August 2024

Cobra Micro Talk MT 972 Bedienungsanleitung

14 August 2024

Cobra MR F77 GPS Bedienungsanleitung

10 August 2024

Cobra CWR200 Bedienungsanleitung

10 August 2024

Cobra PX650 Bedienungsanleitung

6 August 2024

Cobra HH330 Bedienungsanleitung

4 August 2024

Cobra MR F77W GPS Bedienungsanleitung

3 August 2024

Bedienungsanleitung Radio

Neueste Bedienungsanleitung für -Kategorien-

Ruarkaudio Rseven Bedienungsanleitung

16 Oktober 2024

Ruarkaudio MR1 Bedienungsanleitung

16 Oktober 2024

Denver TWE-55B Bedienungsanleitung

15 Oktober 2024

AudioSonic CL-1486 Bedienungsanleitung

14 Oktober 2024

Sangean DPR-39 Bedienungsanleitung

14 Oktober 2024

Sangean RCR-9 Bedienungsanleitung

14 Oktober 2024

PerfectPro Dabbox Bedienungsanleitung

13 Oktober 2024

Uniden UH45CP Bedienungsanleitung

12 Oktober 2024

Sencor SIR 5000WDB Bedienungsanleitung

11 Oktober 2024

AEG KRC 4350 BT Bedienungsanleitung

10 Oktober 2024