CLEAR&WISE Active Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für CLEAR&WISE Active (2 Seiten) in der Kategorie Hörgerät. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
User Guide
READ BEFORE USE
ACTIVE
Superior Sound OTC Hearing Aids
Quick Guide before Use
1. Device Structure
2. Charging Case
4. Changing the dome
3. Choosing the Ear dome
• Choosing ear domes that fit your canal
• Please charge before using for the first time
• Clean your ear with a cotton swab before use
• Inserting the hearing aid before turning it on can
effectively reduce howling sound
(Set the hearing aid to low volume)
1. Left charging port
2. Left battery life
3. Right charging port
4. Right battery life
5. Case battery life
6. Charging port
Choose the right size for the patient, then connect the ear dome
on the hearing aid.
When attaching a new dome, be sure to press with enough force
that you feel a pop or click when it connects. Check to make
sure the dome is not pressed flat against the hearing aid
because this can block the sound receiver. The dome will
connect firmly and click into place but still leave a slight amount
of space between the tip of the hearing aid and the dome.
Note: Start with smallest dome, if it causes a whistling sound
because the domes are too small for the ears, try larger dome.
Dome
Microphone
Power switch
Charging contact
Pull wire
Volume control
CAUTION: Make sure dome clicks into place and
is secure to hearing aid.
4.
3.
5.
6.
2.
1.
5. Volume Control
Adjust the volume with the screw driver:
1. Turn volume up with clockwise rotation
2. Turn volume down with counter-clockwise rotation
Note: Keep the volume at low level when you use for the first
time. Then you can increase volume up slowly to find the best
volume level.
7. Inserting Into Ear
Use your thumb and forefinger to hold
the hearing aid against the ear canal
and gently push it in (figure 1). Use your
other hand to adjust your ear while inserting
the hearing aid. Use your forefinger to
move hearing aid up and down and gently
press into place. Open and close your mouth
to help determine if the hearing aid is in
place (figure 2).
8. Charging Device
9. Charging Case
Connect USB-C to the charging case
(figure 5), plug into power adapter and
connect with 220V power outlet.
Charging indicators will be red (figure 6)
Light will turn off when fully charged.
11. Remove the Device
12. Important Note
Hold the pull wire with your thumb and
index finger and gently pull the hearing
aid out of the ear canal.
10. Cleaning Hearing Aid
Get the cleaning brush from the accessory box. Remove the dome
from the device. Use the cleaning brush to remove wax, dirt, or any
debris from both the dome and the device itself. The dome may be
rinsed in warm water, but be sure the domes are completely dry
before reattaching to your device.
6. Power Switch
To turn your device on, turn power switch “N”
To turn your device off, turn power switch “O”
1. Don’t use the hearing aid at a high volume for a long time. It will
damage your hearing.
2. Maintain and clean the product all the time in order to avoid the
ear plug and microphone opening being blocked by debris.
3. Please don’t use when showering, swimming, raining or in wet
environment. Don’t expose the hearing aid to direct sunlight or
other heat sources.
4. Handle hearing aids with care and avoid dropping on the floor.
5. Only use the charger and adapter provided with the hearing aid.
6. Do not disassemble or modify the hearing aid.
7. Keep the hearing aid away from children.
1. When the device volume is low or not
working well, it might have low
power. Please charge at this time.
2. Turn the power to “off”, and then put
the hearing aid into charging case
(figure3,4). The LED display on the
case will indicate when charging and
the battery levels for the individual
hearing aid as well as the case itself.
1
6
5
2
3
4


Produktspezifikationen

Marke: CLEAR&WISE
Kategorie: Hörgerät
Modell: Active

Brauchst du Hilfe?

Wenn Sie Hilfe mit CLEAR&WISE Active benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten