Clarke CHDBG900 Bedienungsanleitung
Clarke
Tischschleifer
CHDBG900
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Clarke CHDBG900 (31 Seiten) in der Kategorie Tischschleifer. Dieser Bedienungsanleitung war fĂĽr 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/31
OPERATION & MAINTENANCE
INSTRUCTIONS
ORIGINAL INSTRUCTIONS GC0421 - Rev 2
8”(200mm) BENCH GRINDER
MODEL NO: CHDBG900
PART NO: 6500540
2
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
INTRODUCTION
Thank you for purchasing this CLARKE 8”(200mm) Bench Grinder.
Before attempting to use this product, please read this manual thoroughly and
follow the instructions carefully. In doing so you will ensure the safety of yourself
and that of others around you, and you can look forward to your purchase
giving you long and satisfactory service.
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt which will be
required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission.
This guarantee does not effect your statutory rights.
ENVIRONMENTAL RECYCLING POLICY
By purchasing this product, the customer is taking on the obligation
to deal with its safe disposal in accordance with the Waste Electrical
and Waste Electronic Equipment regulations (WEEE).
In effect, this means that this product must not be disposed of with
general household waste. It must be disposed of according to the laws
governing Waste Electrical and Electronic Equipment (WEEE) at a recognised
disposal facility.
If disposing of this product or any damaged components, do not dispose of
with general waste. This product contains valuable raw materials. Metal
products should be taken to your local civic amenity site for recycling of metal
products.
3
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
SPECIFICATIONS
POWER TOOL SAFETY WARNINGS
1) WORK AREA
1. Keep the work area clean and well lit. Cluttered and dark areas invite
accidents.
2. Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
Model number CHDBG900
Part number 6500540
Dimensions (D x W x H) 498 x 250 x 300 mm
Weight 26.3 kg
Rated voltage 230V~ 50 Hz
Rated input wattage 900W
No load speed 2850 RPM (+/- 5%)
IP rating IP40
Wheel shaft diameter 16 mm
Abrasive wheels supplied Coarse (36 Grit), Fine (80 Grit)
Wheel dimensions Diameter (200 mm)
Thickness (32 mm)
Bore (32 mm)
Duty Cycle classification S2/30 minutes
Sound power (measured) 97 dB LpA
Sound power (guaranteed) 98 dB LwA
Uncertainty factor K 1.67 dB
Produktspezifikationen
| Marke: | Clarke |
| Kategorie: | Tischschleifer |
| Modell: | CHDBG900 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Clarke CHDBG900 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Tischschleifer Clarke
4 Juli 2024
Bedienungsanleitung Tischschleifer
- Tischschleifer Parkside
- Tischschleifer FERM
- Tischschleifer DeWalt
- Tischschleifer Stayer
- Tischschleifer Far Tools
- Tischschleifer Holzmann
- Tischschleifer Ronix
- Tischschleifer Yamato
- Tischschleifer Contimac
Neueste Bedienungsanleitung fĂĽr -Kategorien-
11 Oktober 2024
9 Juli 2024
6 Juli 2024
4 Juli 2024
4 Juli 2024
4 Juli 2024
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022